ISTRUZIONE:
• Ph.D. in Ingegneria Civile, Curriculum Strutturale, XV Ciclo presso il Dipartimento di Meccanica Strutturale dell’Università di Pavia, 29/1/2003. Tesi di Dottorato: “Sail Modelling for maximal speed optimum design”. Relatore: Prof. Armando Gobetti. Controrelatore: Prof. Fabio Casciati.

• Diploma post-laurea triennale IUSS – SAFI (Scuola Avanzata di Formazione Integrata dell’Istituto Universitario di Studi Superiori – IUSS) dell’Università di Pavia, 16/12/2002.

• Laurea in Ingegneria Civile, Facoltà di Ingegneria dell’Università di Pavia, 23 Luglio 1999. Indirizzo Strutture sezione Progettazione. Voto 110/110. Tesi di Laurea: “Ottimizzazione di forma di un veicolo fluviomarittimo”. Relatore: Prof. Antonio Tiano. Correlatore: Prof. Paolo Venini. Controrelatore: Prof. Gian Michele Calvi.

POSIZIONE ATTUALE:
• Ricercatore Responsabile del settore Analisi Strutturale presso il Centro Europeo di Formazione e Ricerca in Ingegneria Sismica (EUCENTRE) di Pavia.

• Docente incaricato presso la Facoltà di Ingegneria dell’Università di Pavia, Dipartimento di Ingegneria Civile ed Architettura.

• Docente affiliato al corpo accademico della Scuola Europea di Studi Avanzati per la Riduzione del Rischio Sismico (ROSE School– Istituto Universitario di Studi Superiori – IUSS) a Pavia.

PROFILO PROFESSIONALE:
Idoneo al ruolo di Vice-Rettore nelle Comunità Studentesche, Bando di selezione 8/4/2011. Pavia, C.d.A. EDiSU (Ente per il Diritto allo Studo Universitario) del 22/9/2011.

Cultore della Materia area Tecnica delle Costruzioni (ICAR/09) approvato nel C.d.F del 16/03/2005.

Vincitore concorso pubblico per la qualifica di Ricercatore presso il Centro Europeo di Formazione e Ricerca in Ingegneria Sismica (EUCENTRE). Pavia, 1 Febbraio 2005.

Cultore della Materia area Scienza delle Costruzioni (ICAR/08) approvato nel C.d.F del 23/02/2001.

Abilitazione alla Professione di Ingegnere in Italia da Maggio 2000

Iscrizione Ordine degli Ingegneri della Provincia di Pavia il 26 Marzo 2003 con n°. 2281

ANIDIS – Associazione Italiana di Ingegneria Sismica

CTE – Collegio dei Tecnici della Industrializzazione Edilizia

ISI – Ingegneria Sismica Italiana

NAFEMS – The International Association for the Engineering Analysis Community

Dal 2012 Responsabile (scientifico ed amministrativo) della Formazione Professionale Continua presso il Centro Europeo di Formazione e Ricerca in Ingegneria Sismica (EUCENTRE) di Pavia.

Dal 2010 Responsabile (scientifico ed amministrativo) del settore Analisi Strutturale presso il Centro Europeo di Formazione e Ricerca in Ingegneria Sismica (EUCENTRE) di Pavia.

Dal 2009 Ingegnere consulente presso EQCO Srl, Pavia.

Dal 2007 Docente incaricato presso la Facoltà di Ingegneria dell’Università di Pavia e docente affiliato al corpo accademico della Scuola Europea di Studi Avanzati per la Riduzione del Rischio Sismico (ROSE School–IUSS) a Pavia.

• Incarichi istituzionali:

Membro del Comitato Tecnico Scientifico della Fondazione Pavia Città della Formazione, Istituto Tecnico Superiore (ITS) per Nuove Tecnologie per il Made in Italy – “Sistema casa”, a partire da Gennaio 2014.

Membro del Consiglio dell’Ordine degli Ingegneri della Provincia di Pavia per il quadriennio 2013-1017. 16 Luglio 2013

Membro del Comitato Scientifico del Workshop su “I Collegamenti nelle Strutture Prefabbricate – Connections in Precast Structures”, Università degli Studi di Bergamo – Dipartimento di Ingegneria, ACI Italy Chapter. 5 Ottobre 2012.

Membro del Gruppo di Lavoro Agibilità Sismica dei Capannoni Industriali per la realizzazione delle “Linee di indirizzo per interventi locali e globali su edifici industriali monopiano non progettati con criteri antisismici”. ReLUIS. Da Giugno 2012.

Membro del Comitato Tecnico “CEN TC250/SC Evolution Groups for the Eurocodes EN 1993-1-6, EN 1993-1-7, EN 1993-4-1, EN 1993-4-2 and EN 1993-4-3”. Da Febbraio 2012.

Membro del Gruppo di Lavoro “ECCS TWG8.4 on Shell Buckling”. Da Febbraio 2012.

Membro del Gruppo di Lavoro interistituzionale incaricato della predisposizione di una Scheda di valutazione danno ed agibilità post-sismica per le Strutture Prefabbricate e del relativo Manuale di compilazione. Decreto del Capo del Dipartimento della Protezione Civile (Presidenza del Consiglio dei Ministri) Rep. 827 del 5 Marzo 2012.

Membro del Comitato di Coordinamento del Centro Europeo di Formazione e Ricerca in Ingegneria Sismica (EUCENTRE) di Pavia. Dal 1 Luglio 2010.

Membro del Consiglio Didattico di Ingegneria Civile e Ambientale, Università degli Studi di Pavia. Dal 1 Settembre 2007.

Membro a vita del Consiglio di Amministrazione della Fondazione Nascimbene dal 2008, Ente di Diritto Privato senza scopo di lucro con sede in Via Luigi Porta 23, 27100 Pavia, Cod. Fisc. 80003200187.

Membro dell’Editorial Board WCSMO-5 (World Congress on Structural and Multidisciplinary Optimization) 19-23 Maggio 2003, Lido di Jesolo, Italia (ISBN 88-88412-27-1).

Membro rappresentante dei Dottorandi nel Consiglio di Dipartimento, Dipartimento di Meccanica Strutturale, Università degli Studi di Pavia, 1999-2002.

PUBBLICAZIONI:

1. G.M.Calvi e R.Nascimbene, Design the shells, IUSS Press, 2011, ISBN 978-88-6198-061-7.
2. K.K.Wijesundara, D.Bolognini e R.Nascimbene, Numerical simulation of gusset plate connection with RHS shape brace under cyclic loading, Computational Methods in Earthquake Engineering, Computational Methods in Applied Sciences, Vol. 21 (2010), Manolis Papadrakakis, Michalis Fragiadakis e Nikos D. Lagaros Editors, Springer Publisher, 177-199, ISBN: 978-94-007-0052-9.
3. D.Bolognini e R.Nascimbene, “Precast structure, in “Technical Standards for Construction – Guide to the interpretation and application of DM 14.1.2008 and application of Circular 617/2009” edit by “Il Sole 24 ORE” (2010), 314-331, ISBN: 97-888-3247-627.
4. D.Bolognini e R.Nascimbene, “Precast structure, in “Technical Standards for Construction – Analysis and Commentary of the DM September 14, 2005” edit by “Il Sole 24 ORE” (2006), 195-207, ISBN: 88-324-5957-4.
5. P.Venini and R.Nascimbene, Computing FEM solutions of plasticity problems via nonlinear mixed variational inequalities, IUTAM Symposium on Duality-Complementarity-Symmetry in Nonlinear Mechanics, David Y. Gao Editor, SDCS 2002, Shanghai, (China), August 14-17, 2002, 327-338, ISBN: 1-4020-7887-0.

• Published refereed articles in scientific journals:
6. R. Nascimbene, Analysis and optimal design of fiber-reinforced composite structures: sail against the wind, Wind and Structures, An International Journal, 16(6), pp. 541-560, 2013.
7. R. Nascimbene, An arbitrary cross section, locking free shear—flexible curved beam finite element, International Journal of Computational Methods in Engineering Science and Mechanics, 14(2), pp. 90-103, 2013.
8. T.J. Sullivan, P.M. Calvi and R.Nascimbene, Towards improved floor spectra estimates for seismic design, Earthquakes and Structures, 4(1), pp. 109-132, 2013.
9. S. Santagati, D. Bolognini and R. Nascimbene, Strain life analysis at low cycle fatigue on concentrically braced steel structures with RHS shape braces, Journal of Earthquake Engineering, 16(S1) , pp.107–137, 2012.
10. R. Nascimbene, GA. Rassati and K.K.Wijesundara, Numerical simulation of gusset-plate connections with rectangular hollow section shape brace under quasi-static cyclic loading, Journal of Constructional Steel Research, 70, pp. 177-189, 2011.
11. K.K.Wijesundara, R. Nascimbene and T. Sullivan, Equivalent viscous damping for steel concentrically braced frame structures, Bulletin of Earthquake Engineering, 9(5), pp.1535-1558, 2011.
12. D.Bellotti, D.Bolognini and R.Nascimbene, Response of traditional rc precast structures under cyclic loading, Environmental Semeiotics, 2(2), pp.63-79, 2009.
13. V.Mpampatsikos, L.Petrini and R.Nascimbene, Considerations and suggestions about the seismic assessment procedures of existing r.c. frame buildings according to OPCM 3431 and Eurocode 8, Environmental Semeiotics, 2(1), pp.31-47, 2009.
14. K.K.Wijesundara, D.Bolognini, R.Nascimbene and G.M.Calvi, Review of design parameters of concentrically braced frames with RHS shape braces, Journal of Earthquake Engineering, 13(S1) , pp.109–131, 2009.
15. V.Mpampatsikos, R.Nascimbene and L.Petrini, A critical review of the r.c. frame existing building assessment procedure according to EUROCODE 8 and Italian Seismic Code, Journal of Earthquake Engineering, Vol. 12 (S1), pp.52-82, 2008.
16. L.DellaCroce, P.Venini and R.Nascimbene, Numerical simulation of an elastoplastic plate via mixed finite elements, Journal of Engineering Mathematics, Vol. 46, pp.69-86, 2003.
17. P.Venini and R.Nascimbene, A new fixed-point algorithm for hardening plasticity based on nonlinear mixed variational inequalities, International Journal for Numerical Methods in Engineering, Vol. 57, pp.83-102, 2003.
18. R.Nascimbene and P.Venini, A new locking-free equilibrium mixed element for plane elasticity with continuous displacement interpolation, Computer Methods in Applied Mechanics and Engineering, Vol. 191(17-18), pp.1843-1860, 2002.
19. C.Cinquini, P.Venini, R.Nascimbene and A.Tiano, Design of a river-sea ship by optimization, Struct. Multidisc. Optim., Vol. 22, pp.240-247, 2001.

• Published refereed articles in scientific Italian journals:
20. A. Belleri, P. Riva, R. Nascimbene, Seismic behavior and safety of industrial buildings, Progettazione Sismica, N. 3 September-December, 2012, pp.131-139.
21. R. Nascimbene, E. Fagà, A. Cigada, M. Vanali, M. Moratti, R. Pinho, G.M. Calvi, The construction of a metal scaffolding for the main spire of the Milan cathedral: analysis, modeling and dynamic identification, Progettazione Sismica, N. 1 January-April, 2012, pp.15-34.
22. E. Fagà, M. Moratti, G.M. Calvi e R. Nascimbene, Seismic upgrading of elevated tanks in reinforced concrete: analysis and verification, Progettazione Sismica, N. 3 September-December, 2011, pp.7-22.
23. L. Marinini, P. Spatti, P. Riva e R. Nascimbene, Precast structures: modern systems of seismic protection, Progettazione Sismica, N. 3 September-December, 2011, pp.23-44.
24. V. Fort, R. Nascimbene e K.K. Wijesundara, Evaluation of the equivalent viscous damping coefficient for steel concentrically braced frames made with RHS: direct displacement based design method, Ingegneria Sismica (International Journal of Earthquake Engineering), N. 3 July-September, 2011, pp.43-66.
25. E.Fagà, D.Bolognini e R.Nascimbene, Steel structures with concentric bracing, design and seismic verification, Ingegneria Sismica, N. 4 October-Dicember, 2009, pp.25-40.
26. I.Lanese, F.Marazzi e R.Nascimbene, The change of scale of the structures for the verification of seismic shaking table: a reinforced concrete frame designed for vertical loads, Ingegneria Sismica, N. 4 October-Dicember, 2008, pp.13-27.
27. G.M.Calvi, M.Filippetto, D.Bolognini e R.Nascimbene, RC structures in seismic areas: state of Italian building practice and main design issues, Ingegneria Sismica, N. 1 January-March, 2007, pp.41-56.

• Published refereed articles in scientific conferences or symposia:
28. E. Brunesi, R. Nascimbene, G.A. Rassati, Evaluation of the response of partially restrained bolted beam-to-column connection subjected to cyclic pseudo-static loads, Structures 2013 Congress, Pittsburgh, May 2-4, 2013.
29. E. Brunesi, D. Bolognini and R.Nascimbene, Evaluation of the Shear Strength Capacity of Precast-Prestressed Hollow Core Floor Slabs – Part 2: Code Comparisons and Design Method, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, September 24-28, 2012.
30. R. Sousa, D. Kazantzidou-Firtinidou, L. Sousa, M. Kohrangi, T. Eroglu, R. Pinho and R.Nascimbene, Reliability of Nonlinear Static Analysis for Seismic Assessment of Irregular RC Buildings, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, September 24-28, 2012.
31. R. Sousa, D. Kazantzidou-Firtinidou, L. Sousa, M. Kohrangi, T. Eroglu, R. Pinho and R.Nascimbene, Effect of different modelling assumptions on the seismic response of RC structures, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, September 24-28, 2012.
32. S.A.M. Alaee, T. Sullivan, C. Rogers, R.Nascimbene, Semi-empirical method to predict the displacement capacity and resistance of cold-formed steel frame wood-panel shear walls, World Conference on Timber Engineering 2012, WCTE 2012 5, pp. 450-455.
33. E.Fagà, G.A. Rassati, R. Nascimbene, Seismic design of elevated steel tanks with concentrically braced supporting frames, Structures Congress 2012 – Proceedings of the 2012 Structures Congress , pp. 1473-1484.
34. S.Akçelyan, T.J. Sullivan, R. Nascimbene, Ters-V Merkezi Çelik Çapraz Sistemlerin Yerdeğiştirmeye Göre Tasarımı, Ulusal Çelik Yapilar Sempozyumu (National Steel Structures Symposium), Instanbul, October 24-26, 2011.
35. R. Sousa, F. Bianchi, R. Pinho, R. Nascimbene, D. Kazantzidou, Modelling issues on seismic assessment of irregular RC structures, ECCOMAS Thematic Conference – COMPDYN 2011: 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering: An IACM Special Interest Conference, Programme.
36. M. Raimondi, S. Santagati, D. Bellotti, D. Bolognini, R. Nascimbene, A numerical model for the evaluation of the seismic response of RC walls, , 14th European Conference on Earthquake Engineering ECEE, Ohric, Republic of Macedonia, September 3, 2010.
37. K.K. Wijesundara, G.A. Rassati, D. Bolognini, R. Nascimbene, Effect of gusset end restraint on the effective length of bracing members in concentrically braced frames, 14th European Conference on Earthquake Engineering ECEE, Ohric, Republic of Macedonia, September 3, 2010.
38. K.K.Wijesundara, D.Bolognini, R.Nascimbene and G.Rassati, Seismic performance of brace-beam-column connections in concentrically braced frames, NASCC North American Steel Construction Conference, Orlando, Florida, May 12-15, 2010.
39. E.Fagà, L.Bianco, D.Bolognini and R.Nascimbene, Comparison between numerical and experimental cyclic response of alternative column to foundation connections of RC precast structures, Third International fib Congress and Exhibition, Washington D.C., May 29 –June 2, 2010.
40. V.Mpampatsikos, L.Petrini and R.Nascimbene, EUROCODE 8: comparison of different methods of analysis for the assessment of existing r.c. frame buildings, Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2009, Island of Rhodes, Greece, June 22-24, 2009.
41. V.Mpampatsikos, D.Bolognini and R.Nascimbene, Assessment of the equivalent viscous damping ratio for hybrid wall-to-foundation connections of precast wall panels, Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2009, Island of Rhodes, Greece, June 22-24, 2009.
42. K.K.Wijesundara, D.Bolognini and R.Nascimbene, Numerical simulation of gusset plate connection in concentrically braced frame, Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2009, Island of Rhodes, Greece, June 22-24, 2009.
43. D.Bellotti, D.Bolognini, F.Dacarro and R.Nascimbene, Seismic design of traditional industrial steel and RC precast structures: a comparative analysis, 5th European Conference on Steel and Composite Structure, Eurosteel 2008, Graz, Austria, September 3-5, 2008.
44. D.Bolognini, R.Nascimbene and D.Bellotti, Seismic behaviour of reinforced concrete precast traditional italian frames and subassemblies, 14th World Conference on Earthquake Engineering, WCEE 2008, Beijing, China, October 12-17, 2008.
45. V.Mpampatsikos, R.Nascimbene and L.Petrini, Some considerations about the EUROCODE 8 R.C. frame building assessment procedure, 14th World Conference on Earthquake Engineering, WCEE 2008, Beijing, China, October 12-17, 2008.
46. GM.Calvi, M. Filippetto, D.Bolognini and R. Nascimbene, Seismic design and retrofit of traditional Italian RC precast structure, Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2007, Rethymno, Greece, June 13-15, 2007.
47. F. Marazzi, A. Pavese, L.Petrini and R. Nascimbene, Comparison between Experimental and Numerical models of a full scale RC-Three Storey Structure, Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2007, Rethymno, Greece, June 13-15, 2007.
48. GM.Calvi, D.Bolognini and R. Nascimbene, Seismic design of precast RC structures: state of the art and construction practise in the Italian context, The Second fib Congress 2006, Naples, Italy, June 5-8, 2006.
49. A.Pavese, L.Petrini, V.Mpampatsikos and R. Nascimbene, The new Italian seismic code for existing R.C. buildings: critical application, ACI Spring Convention, New York, USA, April 17-21, 2005.
50. C.Lovadina, R.Nascimbene, I.Perugia and P.Venini, Mixed methods for interface problems, 2nd M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, USA, pp. 2053-2056, June 17-20, 2003.
51. C. Gentilini, R. Nascimbene and F. Ubertini, Towards an alternative approach to geometrical modelling of shell surfaces using a parametric representation, 2nd M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, USA, pp. 288-291, June 17-20, 2003.
52. C. Mariani, P. Venini and R. Nascimbene, Neural networks in computational damage mechanics, 2nd M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, USA, pp. 426-428, June 17-20, 2003.
53. R.Nascimbene, E. van Uden and A. Tiano, Comparison of optimization methods for ship design, European Inland Waterway Navigation Conference, Gyõr, (Hungary), June 11-13, 2003.
54. E. van Uden, A. Tiano and R.Nascimbene, Multicriteria optimization method for yacht design, 4th Workshop on European Scientific and Industrial Collaboration, WESIC 2003, Miskolc, (Hungary), May 28-30, 2003.
55. C.Cinquini, A.Gobetti and R.Nascimbene, Sail optimization for maximal speed design, 5th World Congress of Structural and Multidisciplinary Optimization, WCSMO V, Lido di Jesolo, (Italy), May 19-23,2003.
56. A.Tiano, E. van Uden and R.Nascimbene, Non linear identification of underwater vehicles, 29th Israel Conference on Mechanical Engineering, Haifa, (Israel), May 12-14, 2003.
57. R.Nascimbene and P.Venini, A variational inequality approach for incompressible elastoplasticity, 7th International Conference on Computational Plasticity, COMPLAS 2003, Barcelona, (Spain), April 7-10, 2003.
58. A.Gobetti and R.Nascimbene, Development of a new locking-free curved shell element, 5th World Congress on Computational Mechanics, WCCM 2002, Vienna, (Austria), July 7-12, 2002.
59. P.Venini, R.Nascimbene and A.Reali, A prewavelet meshless approach for plane inelastic systems, 5th World Congress on Computational Mechanics, WCCM 2002, Vienna, (Austria), July 7-12, 2002.
60. P.Venini and R.Nascimbene, Computational damage mechanics with neural networks, 5th World Congress on Computational Mechanics, WCCM 2002, Vienna, (Austria), July 7-12, 2002.
61. A.Gobetti, P.Venini and R.Nascimbene, Finite element analysis of membrane structure including active piezoelectric devices, 3rd World Conference on Structural Control, WCSC 2002, Como, (Italy), April 7-12, 2002.
62. A.Gobetti and R.Nascimbene, Elasto-plastic, nonlinear analysis of a locking-free shear/flexible/twisting curved beam element, 2nd European Conference on Computational Mechanics, ECCM 2001, Cracow, (Poland), June 26-29, 2001.
63. R.Nascimbene and A.Tiano, Global Optimization Applied to the design of a River-Sea Ship, 3rd Workshop on European Scientific and Industrial Collaboration, WESIC 2001, Enschede, (Netherlands), June 27-29, 2001.
64. R.Nascimbene and P.Venini, Methods of non-smooth optimization for the numerical solution of elastoplastic problems, 4th World Congress of Structural and Multidisciplinary Optimization, WCSMO IV, Dalian, (China), June 4-8, 2001.
65. C.Cinquini, R.Nascimbene and P.Venini, An implementation of the JM and BDFM elements in elastoplasticity, Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000, Barcelona, (Spain), September 11-14, 2000.
66. C.Cinquini, A.Tiano, R.Nascimbene and P.Venini, Spectrum Shape Optimization of a Container Ship System, 3rd World Congress of Structural and Multidisciplinary Optimization, WCSMO III, Niagara Falls/Amherst, (New York), May 17-21, 1999.
67. A.Tiano, F.Pizzocchero, P.Venini and R.Nascimbene, Multivariable Identification of Human Body Response to Vibrations, 2nd Workshop on European Scientific and Industrial Collaboration, WESIC 1999, University of Wales College, (Newport), September 1-3,1999.

• Publication of articles in Italian scientific conventions:
68. S. Santagati, D. Bellotti, E. Brunesi, D. Bolognini e R. Nascimbene, Advanced Techniques of Seismic Protection of RC Structures, – Connections in Precast Structures, University of Bergamo – ACI Italy Chapter, Dalmine, Italy, October 5,2012.
69. R. Sousa, F. Bianchi, R. Pinho e R. Nascimbene, Modeling issues in the seismic evaluation of existing structures, AIST Conference, Bologna, October 6, 2011.
70. E. Brunesi, D. Bellotti, D. Bolognini e R. Nascimbene, Development of models for the definition of the equivalent stiffness of different configurations of Rep® beams, XIV Convegno ANIDIS, Bari, September 18-22, 2011.
71. E. Fagà, M. Moratti, R. Nascimbene, R. Pinho, Analysis and verification of seismic RC suspended existing trellis tanks, XIV ANIDIS Conference, Bari, September 18-22, 2011.
72. R. Sousa, F. Bianchi, R. Pinho e R. Nascimbene, Seismic evaluation of RC existing buildings: a comparison between Eurocode 8 and the New Technical Standards for Construction (NTC-08), XIV ANIDIS Conference, Bari, September 18-22, 2011.
73. K. Wijesundara, E. Brunesi, D. Bolognini, R. Nascimbene, Shear Strength of Precast Pre compressed hollow core concrete slabs, XIV ANIDIS Conference, Bari, September 18-22, 2011.
74. E. Fagà, L. Bianco, D. Bellotti, D. Bolognini e R. Nascimbene, Response to cyclic loading of a system of connection between precast columns and foundation using metal plates and coach screws, 18° CTE Conference, Brescia, November 11-13, 2010.
75. A. Belleri, P. Riva, D. Bolognini e R. Nascimbene, Methods of seismic protection of precast structures by dissipating devices, 18° CTE Conference, Brescia, 11-November 13, 2010.
76. E. Fagà, D. Bolognini e R. Nascimbene, Design of steel structures with concentric bracing in seismic areas, XXII C.T.A. Conference (Collegio dei Tecnici dell’Acciaio), Padova, September 28-30, 2009.
77. D. Bellotti, D. Bolognini e R. Nascimbene, Cyclic response of RC traditional three-storey structures and pillar-glass plinth, XIII ANIDIS Conference, Bologna, June 28 – July 2, 2009.
78. V.Mpampatsikos, L.Petrini and R.Nascimbene, Indications for modeling the effective stiffness of the structural elements in the linear analysis of RC existing framed, XIII ANIDIS Conference, Bologna, June 28 – July 2, 2009.
79. K. Wijesundara, D. Bolognini, R. Nascimbene, M. Corigliano, C.G. Lai, Real vs artificial accelerograms in time histories analyses of brace frames structures, XIII ANIDIS Conference, Bologna, June 28 – July 2, 2009.
80. L. Marinini, P. Spatti, P. Riva, R. Nascimbene, L. Izzo, M. Maffioletti, A. Spadavecchia, Sviluppo di una connessione dissipativa per strutture prefabbricate, 17° Convegno CTE, Roma, 6-8 Novembre 2008.
81. D. Bellotti, R. DeLuca, D. Bolognini e R. Nascimbene, Dissipative connection development for precast structures, 17° CTE Conference, Roma, November 6-8, 2008.
82. I.Lanese, R.Nascimbene, A.Pavese e R.Pinho, Numerical simulations of a 3D frame buffered in support of dynamic tests on a vibrating table, Convegno Reluis “Assessment and reduction of seismic vulnerability of existing RC buildings “,Reluis 2008, Roma (Italy), May 29-30, 2008.
83. V.Mpampatsikos, R.Nascimbene and L.Petrini, RC frame existing building assessment: considerations and suggestions about EC8 and OPCM 3431 procedures, Reluis Conference “Assessment and reduction of seismic vulnerability of existing RC buildings.”, Reluis 2008, Roma (Italy), May 29-30, 2008.
84. P.Venini e R.Nascimbene, dynamic of micro-fractured bodies: multi-field modeling and numerical studies, XVI Conference of Italian Group of Computational Mechanics, GIMC 2006, Bologna, (Italy), June 26-28, 2006.
85. GM.Calvi, N. Visconti, D. Bolognini e R.Nascimbene, Modeling and verification in seismic of precast structures, CONSTRUCTA 2004, Roma, (Italia), October 28-30, 2004.
86. C.Cinquini, P.Venini e R.Nascimbene, An alternative approach to cohesive crack propagation, 16th AIMETA Congress of Theoretical and Applied Mechanics, Ferrara, (Italy), 8-12 Settembre 2003.
87. C.Cinquini, R.Nascimbene e P.Venini, Towards an alternative approach to strong discontinuities, 3rd Joint Conference of Italian Group of Computational Mechanics and Ibero-Latin American Association of Computational Methods in Engineering, GIMC 2002, Giulianova, (Italy), June 24-26, 2002.
88. R.Nascimbene, Penalty Partial Reduced Selective Integration Applied to Shell Elements, Atti del XV AIMETA Conference, Taormina, September 26-29, 2001.

• Publications in trade magazines:
89. A. Belleri, D. Bellotti, R. Nascimbene, P. Riva, Vulnerabilities in industrial buildings affected by the earthquake in May 2012, Precast Design, Vol. 2, pp. 16, 2013.
90. GM.Calvi, M.Moratti, R. Nascimbene, E. Fagà e R.Pinho, The Great Spire of the Duomo of Milan: analysis, modeling and verification, Structural Modeling, Magazine di Ingegneria Strutturale, CSP Fea, Vol. 7, pp.4-6, 2012.
91. E.Fagà, L.Bianco, D. Bellotti, D. Bolognini e R.Nascimbene, Cyclic behavior of a system of connection between precast columns and foundation through the use of metal plates and coach screws, Structural Modeling, Magazine di Ingegneria Strutturale, CSP Fea, Vol. 3, pp.6-9, 2011.
92. K.K.Wijesundara, R.Nascimbene e D.Bolognini, Numerical simulation of gusset plate connection with RHS shape brace under cyclic loading, Structural Modeling, Magazine di Ingegneria Strutturale, CSP Fea, Vol. 2, pp.12-15, 2010
93. D. Bellotti, R. DeLuca, D. Bolognini e R. Nascimbene, Risposta a carichi ciclici di telai prefabbricati tradizionali di tre piani in c.a., Industrie Manufatti Cementizi, ASSOBETON, N. 13 of 2010, pp.14-21.
94. L.Bianco, S.Santagati, D.Bolognini e R.Nascimbene, Evaluation of the seismic response of column-foundation connections through system bolted metal shoe – anchor bolt, “C&PI Calcestruzzo & Prefabbricazione International”, N. 1 of 2009 (February), pp. 170-176.
95. L.Bianco, S.Santagati, D.Bolognini e R.Nascimbene, Seismic response of columns connected to the foundation through a fastening technique, in “Peikko News”, N. 1 of 2009, pp.13-20.
96. L. Marinini, P. Spatti, P. Riva, R. Nascimbene, L. Izzo, M. Maffioletti, A. Spadavecchia, Development of a dissipative connection for precast structures, CSP Magazine, La Rivista dell’Edilizia Industrializzata, Year 2009, Numero 1, pag. 9.

• Publications of divulgation:
97. R. Nascimbene, The development of calculation software: where we come from and where are we going?, INGENIO, Number 5, pag. 32, 2012.
98. R. Nascimbene, Emilia Earthquake: Issues relating to precast and civil buildings, You Trade, Number 33, pag. 63-64, 2012.
99. R. Nascimbene, Validation and testing: indispensable “union”!, INGENIO, Number 1, pag. 21-22, 2012.
100. R. Nascimbene, Silos and tanks: structures or not?,INGENIO Web, 2012.
101. R. Nascimbene, Software validation, verification manual or guidelines?, il Giornale dell’Ingegnere, Year 59, Number 17, pag. 7-9, September 1, 2011.
102. R. Nascimbene, When the earth shakes, Il giornale di Socrate al caffè, Number 34, pag. 7, December, 2007.

WordPress Appliance - Powered by TurnKey Linux