Pubblicazioni Scientifiche

Articoli su rivista internazionale

1. Baker, J.W., Crowley, H., Wald, D., Cavalieri, F. et al. (2024). Sharing data and code facilitates reproducible and impactful research, Earthquake Spectra. 2024; 40(3):2210-2218, https://doi:10.1177/87552930241259397
2. Bellotti, D., Cavalieri, F., Nascimbene, R. (2024). Influence of closure external panels modelling on the seismic response of non-residential precast buildings, Journal of Earthquake Engineering, 28(1), 288-304. DOI: https://doi.org/10.1080/13632469.2023.2197517
3. Bracchi, S., Rota, M., Penna, A. (2024). Modelling reinforced masonry buildings by a mechanics-based macroelement approach, Earthquake Engineering and Structural Dynamics, https://doi.org/10.1002/eqe.4267
4. Bolognini, D., F. Dacarro, L. Grottoli, R.R. Milanesi, P. Morandi (2024). Development of a method based on audio waves for fast in-situ out-of-plane dynamic evaluations of the frequencies of masonry infills, Construction and Building Materials, Volume 452, 2024, 138874, ISSN 0950-0618, https://doi.org/10.1016/j.conbuildmat.2024.138874
5. Brunesi, E., Nascimbene, R. (2024) Evaluating the Seismic Resilience of Above-Ground Liquid Storage Tanks, Buildings 14 (10): 3212. https://doi.org/10.3390/buildings14103212
6. Cattari, S., Alfano, S., Manfredi, V., Borzi, B., Faravelli, M., Di Meo, A., da Porto, A., Saler, E., Dall’Asta, A., Gioiella, L., Di Ludovico, M., Del Vecchio, C., Del Gaudio, C., Verderame, G., Gattesco, N., Boem, I., Speranza, E., Dolce, M., Lagomarsino, S., Masi, A. (2024). National risk assessment of Italian school buildings: the MARS project experience, International Journal of Disaster Risk Reduction, 104822, ISSN 2212-4209, https://doi.org/10.1016/j.ijdrr.2024.104822
7. Damiani, N., DeJong, M. J., Albanesi, L., Graziotti, F., Morandi, P. (2024). Parametric study on the in-plane performance of a steel frame retrofit solution for URM buildings using DEM, Engineering Structures, 302, 117293. DOI: 10.1016/j.engstruct.2023.117293
8. Faravelli, M., Di Meo, A., Borzi, B., Cantoni, A., Savadori, L. Speranza, E., Dolce, M. (2024). SICURO+: a web platform to raise awareness on Seismic Risk in Italy, International Journal of Disaster Risk Reduction, 103, 104345, doi: https://doi.org/10.1016/j.ijdrr.2024.104345
9. Furinghetti, M., Mansour, S., Marra, M., Silvestri, S., Lanese, I., Weber, F., Pavese, A. (2024). Shaking table tests of a full-scale base-isolated flat-bottom steel silo equipped with curved surface slider bearings, Soil Dynamics and Earthquake Engineering, Volume 176, 2024, 108321, ISSN 0267-7261, https://doi.org/10.1016/j.soildyn.2023.108321
10. Furiosi A., Damiani N., Rota M., Penna A. (2025). Seismic fragility assessment of a multi-span masonry arch bridge using a discontinuum modeling approach, submitted to Earthquake Engineering and Structural Dynamics.
11. Mandirola, M., Casarotti, C., Morra di Cella, U., Berton, A., Rossi, G., Tacconi Stefanelli, C., Menin, A., & Lorusso, O. (2024). A Technical-Thematic Civil Protection Exercise in Italy: UAS Fleets-Based Activities Supporting Emergency Response in Seismic Scenarios, Applied Sciences, 14(12), 5306. https://doi.org/10.3390/app14125306
12. Merino, R. J., Rodriguez, D., Peloso, S., Brunesi, E., Perrone, D., Filiatrault, A., Nascimbene, R. (2024). Experimentally Calibrated Numerical Modeling for Performance-Based Seismic Design of Low-Frequency Rocking Electrical Cabinets, Journal of Earthquake Engineering, 1–31. https://doi.org/10.1080/13632469.2024.2390090
13. Morandi, P., M. Kurukulasuriya, R.R. Milanesi, D. Bolognini, L. Grottoli, F. Dacarro, G. Magenes (2025). Dynamic shaking table out-of-plane tests on weak masonry infills with and without previous in-plane loading, Journal of Building Engineering, Volume 100, 2025, 111670, ISSN 2352-7102, https://doi.org/10.1016/j.jobe.2024.111670
14. Nascimbene, R., Brunesi, E., Sisti, A. (2024). Expeditious numerical capacity assessment in precast structures via inelastic performance-based spectra, Helyon, Volume 10, Issue 21, November 15, 2024, doi:10.1016/j.heliyon.2024.e39729
15. Orgnoni, A., Pinho, R. (2024). Applied Element Modelling of cyclic flexural and torsional response of non-planar RC walls, Bull Earthquake Eng, https://doi.org/10.1007/s10518-024-02065-x
16. Penna, A., Rota, M., Bracchi, S., Angiolilli, M., Cattari, S., Lagomarsino, S. (2024). Modelling and Seismic Response Analysis of Existing URM Structures. Part 1: Archetypes of Italian Modern Buildings, Journal of Earthquake Engineering, Vol. 28, No. 4, pp. 1130–1156, https://doi.org/10.1080/13632469.2022.2095060
17. Polese, M., Tocchi, G., Babič, A., Dolsek, M., Faravelli, M., Quaroni, D., Borzi, B., Rebora, N., Ottonelli, D., Wernhart, S., Pejovic, J., Serdar, N., Lebar, K., Rusjan, S., Masi, R., Resch, C., Kern, H., Cipranić, I., Ostojic, M., Prota, A. (2024). Multi-risk assessment in transboundary areas: A framework for harmonized evaluation considering seismic and flood risks, International Journal of Disaster Risk Reduction, 104275, ISSN 2212-4209, https://doi.org/10.1016/j.ijdrr.2024.104275
18. Rizzoli, V., Tagliacozzo, S., Morsut, C., Di Bucci, D., Fagà, G., Casarotti, C., Polese, M. (2024). A methodology for identifying, documenting and extrapolating potential good practices in disaster risk management, International Journal of Disaster Risk Reduction, Volume 108, 2024, 104477, ISSN 2212-4209, https://doi.org/10.1016/j.ijdrr.2024.104477
19. Shahnazaryan, D., Pinho, R., Crowley, H., O’Reilly, G. (2024). The Built Environment Data platform for experimental test data in earthquake engineering, Earthquake Engineering & Structural Dynamics, https://doi.org/10.1002/eqe.4231
20. Suarez, D., Calvi, G.M., Gentile, R. (2024). Direct loss-based seismic design of low-rise base-isolated reinforced concrete buildings, Earthquake Engineering & Structural Dynamics, https://doi.org/10.1002/eqe.4238

 

Articoli in conferenze internazionali

21. Albanesi, L., Morandi, P., Magenes, G. (2024). Proposals for the definition of performance limit states and related drift capacity for URM walls, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
22. Anwar, M.Y., Brunesi, E., Peloso, S. (2024). Issues of IP-OP interaction for seismic fragility estimation of masonry infills in RC frames, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
23. Bellotti, D., Cavalieri, F., Nascimbene, R. (2024). Categorisation of the Italian single-storey precast concrete building stock, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
24. Bellotti, D., Cavalieri, F., Nascimbene, R. (2024). Seismic assessment and modelling of dowel beam to column connections. Sottomesso a COMPDYN 2025, Rodi, June 2025.
25. Bianchi, F., Guidotti, M., Pinho, R. (2024). Impact of floor diaphragm modelling assumptions in the seismic assessment of rc buildings, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
26. Bianchi, F., Guidotti, M., Pinho, R., Nascimbene, R. (2024). Seismic assessment of RC buildings using linear analysis methods: an overly conservative practice, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
27. Borzi B., Bellotti D., Eren N., Famà A., Manzini C.F., Morandi P., Pagano M., Quaroni D. (2024). Large scale vulnerability assessment of roadway bridges, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
28. Borzi B., Bozzoni F., Famà A., Onida M., Pagano M., Giordano F., Speranza E. (2024). Seismic risk scenarios for transport infrastructures in the 2022 Italian Civil Protection Exercise, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
29. Borzi B., Faravelli M., Di Meo A. (2024). Computation of Damage Scenario with SP-BELA, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
30. Bozzoni, F., Borzi, B., Faravelli, M., Famà, A., Pascale, V., Quaroni, D., Molinari, I., Sgattoni, G., Antoncecchi, I., Di Bucci, D. (2024). A methodology for assessing the impacts of seismicity potentially triggered by offshore activities, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
31. Bozzoni, F., Borzi, B., Faravelli, M., Onida, M., Pagano, M., Quaroni, D. (2024). A webGIS tool to assess the seismic risk of health facilities for emergency management in Italy, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
32. Bozzoni, F., Corradi, M., Dacarro, F., Germagnoli, F., Gervasini, E., Orlando, A. (2024). Improving the resilience of Milan Malpensa airport (Italy) against natural hazards, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
33. Bracchi, S., Rota, M., Penna, A. (2024). Seismic response of an URM building strengthened with FRCM, 18th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
34. Buttazzoni, M., Caruso, M., Cavalieri, F., Bellotti, D., Nascimbene, R. (2024). Life cycle environmental impact reduction allowed by seismic rehabilitation of precast concrete structures. Sottomesso a COMPDYN 2025, Rodi, June 2025.
35. Buttazzoni, M., Caruso, M., Passoni, C., Labò, S., Marini, A., Pinho R. (2024). Application of a multi-criteria decision-making approach for optimal building retrofitting, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
36. Calvi, G.M. (2024). Earthquake engineering in Italy: a golden braid of teachings and trainings, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
37. Calvi, G.M., Famà, A., Ozcebe, A.G., Andreotti, G., Zuccolo, E., Borzi, B., Lai, C.G., Laureti, G., Trovarelli, M., Germagnoli, F. (2024). Providing a large-scale seismic strengthening solution: the case study of Arquata del Tronto, Italy, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
38. Carbone, C., Rosti, A., Rota, M., Penna, A. (2024). Derivation of fragility curves for Italian masonry churches from post-earthquake damage data, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
39. Cavalieri, F., Bellotti, D., Caruso, M., Nascimbene, R. (2024). Seismic response and environmental impact of rehabilitation strategies for precast structures, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
40. Cogliano, M., Calvi, G.M., Scattarreggia, N. (2024). The Bolu viaduct: a comparison between hand calculations-and software-based seismic retrofit, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
41. Dacarro F., Bolognini D., Grottoli L. (2024). 9DOFS seismic testing of non-structural components and systems under full-scale floor motions, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
42. Dacarro F., Bolognini D., Grottoli L., Kurukulasuriya M., Milanesi R.R., Morandi P. (2024). A method for the in-situ out-of-plane characterization of masonry infill walls based on audio waves, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
43. Damiani, N., Albanesi, L., Manzini, C.F., Morandi, P. (2024). Validation strategy for novel integrated retrofit solutions: a dem-based study, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
44. Degli Abbati, S., Manzini, C.F., Morandi, P., Candeloro, F., Parisse, F., Brandonisio, G., Camata, G., Magenes, G., Cattari, S. (2024). Fnvestigating the reliability of equivalent frame models in commercial software: a urm case study, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
45. Donà, M., Morandi, P., Manzini, C.F., da Porto, F., Magenes, G. (2024). New method in EN1996 for the verification of second-order effects in load-bearing masonry walls, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
46. Dondi, P., Gullotti, A., Inchingolo, M., Senaldi, I., Casarotti, C., Lombardi, L., & Piastra, M. (2024). Improving Post-Earthquake Crack Detection using Semi-Synthetic Generated Images, 18^th European Conference on Computer Vision ECCV2024, Milano, Italia. https://arxiv.org/abs/2412.05042
47. Fagà, G., Casarotti, C., De Vita, D. (2024). EXE.LOMB.EST 2023: civil protection technical-thematic exercise, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
48. Faravelli, M., Borzi, B., Onida, M., Pagano, M. (2024). Tools for seismic risk assessment on different asset types, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
49. Faravelli, M., Onida, M., Pagano M., Quaroni, D., Borzi, B., Speranza, E., Cafardi, A., Damiani, E. (2024). Exposure database of Italian school buildings for seismic risk and real-time damage scenarios, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
50. Furiosi, A., Damiani, N., Rota, M., Penna, A. (2024). Seismic assessment of a multi-span masonry arch bridge using 3D discrete element modeling, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
51. Gabbianelli, G., Rapone, A., Brunesi, E., Milanesi, R.R., Dubini, P., Nascimbene, R. (2024). Storage tanks vulnerability assessment installed in industrial moment-resisting and braced frame steel structure, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
52. Gentile, R., Angelucci, G., Wu, J., Morandi, P., Milanesi, R.R., Mollaioli, F., O’Reilly, G., Freddi, F., Jalayer, F. (2024). Enhancing state-dependent fragility through experimentally validated energy-based approaches, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
53. Gentile, R., Calvi, G.M. (2024). Advancements and challenges in direct loss-based seismic design, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
54. Kurukulasuriya M., Milanesi R.R., Magenes, G., Bolognini D., Grottoli L., Dacarro F., Morandi P. (2024). Influence of boundary conditions on the experimental seismic response of existing masonry infills, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
55. Lagomarsino, S., Penna, A., Cattari, S., Rota, M., Brunelli, A., Bracchi, S. (2024). Unresolved issues in the design of URM buildings: a critical review of linear and nonlinear methods, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
56. Lanese, I., Bazzini, M., Dacarro, F., Dubini, P., Rizzo Parisi, E., Rota, M. (2024). Shake table tests of acceleration and drift-sensitive nonstructural elements on a new 9-DOF facility, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
57. Lanese, I., Rizzo Parisi, E., Curti, C., Della Sala, S., Bazzini, M., Dubini, P., Dacarro, F., Morandi, P. (2024). Preliminary results of shaking table tests on roof systems, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
58. Manzini, C.F., Bellotti, D. (2024). Implementation of a matlab tool for the seismic assessment of multi-storey precast rc buildings, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
59. Manzini, C.F., Morandi, P., Famà, A., Ozcebe, A.G., Borzi, B. (2024). Multi-level analysis of masonry arch bridges in the Italian transportation network, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
60. Manzini, C.F., Morandi, P., Magenes, G. (2024). The EF method for pushover analyses of URM buildings: limitations and advantages after 30 years, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
61. Milanesi, R.R., Albanesi, L., Manzini, C.F., Morandi, P., Magenes, G. (2024). Msonry infills with sliding joints: conceiving, testing, modelling, design and economic advantages, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
62. Milanesi, R.R., Gabbianelli, G., Gandelli, E., Dubini, P., Nascimbene R. (2024). The improvement of the seismic vulnerability of steel storage tanks with sliding isolators, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
63. Milanesi, R.R., Gotti, A., Gabbianelli, G., Dubini, P., Sarigiannis, D., Nascimbene, R. (2024). Seismic response of different typologies of tanks in chemical plants and impact on human health, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
64. Milanesi, R.R., Guerrini, G., Bolognini, D., Grottoli, L., Dacarro, F., Morandi, P. (2024). Shaking table tests on two full-scale masonry infilled rc frames repaired and strengthened, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
65. Milanesi, R.R., Morandi, P., Kurukulasuriya, M., Magenes, G. (2024). Seismic assessment and design of URM infills: from tests to proposals for codes, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
66. Monsalvo, I., Paolucci, R., Penna, A., Rosti, A., Rota, M., Smerzini, C. (2024). Seismic fragility curves with unconventional intensity measures from physics-based simulations, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
67. Morandi, P., Albanesi, L., Damiani, N., Manzini, C.F. (2024). Validation strategy for novel integrated retrofit solutions: the case of framed systems on urm walls, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
68. Mori, F., Faravelli, M, Bocchi, F., Borzi, B., Naso G. (2024). Near Real-Time seismic damage prediction: comparison of mechanical and data-driven approaches, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
69. Milanesi, R.R., Gotti, A., Gabbianelli, G., Dubini, P., Sarigiannis, D., Nascimbene, R. (2024). Seismic response of different typolgies of tanks in chemical plants and impact on human health, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
70. Nascimbene, R., Cavalieri, F., Bellotti, D. (2024). Characterisation and seismic fragility of Italian single-storey precast concrete buildings, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
71. O’Reilly, G., Calvi, G.M. (2024). ERIES: advancing frontier knowledge in earthquake engineering through laboratory testing, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
72. Orgnoni, A., Brunesi, E., Bolognini, D., Dacarro, F., Malavisi, M. (2024). High-definition numerical modelling of reinforced concrete half-joints, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
73. Orgnoni, A., Pinho, R. (2024). Numerical modelling of u-shaped RC walls using the applied element method (AEM), 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
74. Ozcebe, A.G., Gioffre, D., Famà, A., Zuccolo, E., Bozzoni, F., Lai, C.G. (2024). Impact of constitutive model and input ground motion selection on the seismic response of an earth dam, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
75. Ozsarac, V., Monteiro, R., Calvi, G.M. (2024). Integrated earthquake-induced economic losses for multi-span reinforced concrete bridges, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
76. Peloso, S., Brunesi, E., Perrone, D. (2024). Derivation of seismic fragility models for electrical cabinets, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
77. Penna, A., Bracchi, S., Rota, M. (2024). Refined equivalent-frame modelling of masonry buildings addressing usually overlooked issues, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
78. Ponte, M., Guerrini, G., Garcia-Ramonda, L., Lanese, I., Rizzo Parisi, E., O’Reilly, G., Graziotti, F., Tsiavos, A., Pelà, L., Penna, A., Magenes, G., Bento, R. (2024). Retrofitting of stone masonry using innovative grid-based composites: the ERIES-restoring project, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
79. Rapone, A., Gabbianelli, G, Milanesi, R.R., Nascimbene, R. (2024). Derivation of fragility functions for steel storage tanks using far- and near-field record set, Proc. OpenSees Days, 2024.
80. Rostamkalaee, S., Brunesi, E., Peloso, S. (2024). Test-informed calibration of numerical modelling for IP response of masonry infills, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
81. Rosti, A., Rota, M., Penna, A. (2024). Observational seismic fragility of masonry building aggregates, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
82. Rota, M., Zito, M., Bianchi, F., Dubini, P., Nascimbene, R. (2024). Seismic performance of non-structural elements in an existing building: non-structural monitoring and classification, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
83. Sarkis, A.I., Sullivan, T.J., Brunesi, E., Nascimbene, R. (2024). Seismic assessment of precast pre-stressed concrete floors, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
84. Scattarreggia, N., Ozsarac, V., Monteiro, R. (2024). Corrosion modeling strategy impact on expected seismic losses for RC bridges – a case-study, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
85. Senaldi, I., Casarotti, C., Borzi, B., Bozzoni, F., Famà, A. (2024). NOCTUA: EO-based platform to support risk mitigation and emergency management, 18^th World Conference on Earthquake Engineering (WCEE2024), June 30 – July 5, 2024, Milan, Italy.
86. Šešov, V., Apostolska, R., Šalić, R., Bojadžieva, J., Vitanova, M., Edip, K., Bogdanović, A., Stojmanovska, M,, Borzi, B., Zuccolo, E., Bozzoni, F., Pitilakis, D., Evi, R., Fotopoulou, S., Petridis, C., Stefanoski, S., Shkodrani, N., Baballëku, M. (2024). Seismic Resilience through European Research Networking – CRISIS Project, International Conference on Contemporary Theory and Practice in Construction, vol. 16, no. 1, pp. 47–54, June 2024.

 

Articoli in conferenze nazionali

87. Caruso, M., Buttazzoni, M., Cavalieri, F., Bellotti, D., Nascimbene, R. (2024). Comparative life cycle environmental impact assessment of Italian precast concrete structures, sottomesso a 4th fib Symposium on Concrete and Concrete Structures, Napoli, giugno 2025.
88. Caruso, M., Cavalieri, F., Bellotti, D., Nascimbene, R. (2024). EPD-based LCA of retrofitting solutions for precast concrete buildings, ICC – Italian Concrete Conference (aicap–CTE) 2024. Florence (Italy), 19-21 June 2024.

 

Altro

89. Mandirola, M., Casarotti, C., Cini, D., Rossi, M., Donnini, M., Dattola, L., Russo, G., Menin, A., Loda, A., Rossi, G., Tacconi Stefanelli, C., Pignone, F., Fagugli, G., Grosso, F., Morra di Cella, U., Marotta, E., Doumaz, F., Nannipieri, L. (2024). EXE1: dataset 1 collected within the framework of the Civil Protection Exercise EXE.Lomb.Est 2023 [Data set]. https://doi.org/10.5281/zenodo.10927337
90. Mandirola, M., Casarotti, C., Cini, D., Rossi, M., Donnini, M., Dattola, L., Russo, G., Menin, A., Loda, A., Rossi, G., Tacconi Stefanelli, C., Pignone, F., Fagugli, G., Grosso, F., Morra di Cella, U., Marotta, E., Doumaz, F., Nannipieri, L. (2024). EXE2: dataset 2 collected within the framework of the Civil Protection Exercise EXE.Lomb.Est 2023 [Data set]. https://doi.org/10.5281/zenodo.11037589
91. Mandirola, M., Casarotti, C., Cini, D., Rossi, M., Donnini, M., Dattola, L., Russo, G., Menin, A., Loda, A., Rossi, G., Tacconi Stefanelli, C., Pignone, F., Fagugli, G., Grosso, F., Morra di Cella, U., Marotta, E., Doumaz, F., Nannipieri, L. (2024). EXE3: dataset 3 collected within the framework of the Civil Protection Exercise EXE.Lomb.Est 2023 [Data set]. https://doi.org/10.5281/zenodo.11058518

Articoli su rivista internazionale

1. Albanesi L., Manzini C.F., Morandi P. (2023). Experimental In-Plane Seismic Performance of an Innovative Steel Modular Strengthening System for URM Walls, Journal of Earthquake Engineering, DOI: https://doi.org/10.1080/13632469.2023.2231087
2. Bellotti D., F. Cavalieri & R. Nascimbene (2023). Influence of Closure External Panels Modelling on the Seismic Response of Non-Residential Precast Buildings, Journal of Earthquake Engineering, DOI: https://doi.org/10.1080/13632469.2023.2197517
3. Bosio, M., Di Salvatore, C., Bellotti, D., Capacci, L., Belleri, A., Piccolo, V., Cavalieri, F., Dal Lago, B., Riva, P., Magliulo, G., Nascimbene, R., Biondini, F. (2023). Modelling and Seismic Response Analysis of Non-residential Single-storey Existing Precast Buildings in Italy. Journal of Earthquake Engineering, 27(4), 1047-1068. DOI: https://doi.org/10.1080/13632469.2022.2033364
4. Bozzoni, F., Furiosi, A., Lai, C.G. (2023). Probabilistic assessment of the earthquake-induced soil liquefaction hazard at national scale: macrozonation of the Italian territory. Natural Hazards. 115, 2237 – 2255. https://doi.org/10.1007/s11069-022-05636-w
5. Bozzoni, F., Misiano, G., Lai, C.G. (2023). A multiscale tool for assessing the seismic risk of small dams during emergency preparedness and response phase. Natural Hazards. https://doi.org/10.1007/s11069-023-06081-z
6. Bracchi S., Rota M., Penna A. (2023). A methodology for the calibration of partial safety factors accounting for knowledge level, in pushover-based seismic assessment of URM buildings according to the new draft of Eurocode 8. Procedia Structural Integrity, Vol. 44, No. C, pp. 394-40.
7. Bracchi S., Rota M., Penna A. (2023). Comparison of refined and code-compliant modelling strategies for the seismic analysis of unreinforced masonry buildings. Procedia Structural Integrity, Vol. 44, No. C, pp. 442-449.
8. Caruso M., Pinho R., Bianchi F., Cavalieri F., Lemmo M.T. (2023). Multi-criteria decision-making approach for optimal seismic/energy retrofitting of existing buildings. Earthquake Spectra, 39(1), 191 – 217. DOI: https://doi.org/10.1177/87552930221141917
9. Caruso M., Couto R., Pinho R., Monteiro R. (2023). Decision-making approaches for optimal seismic/energy integrated retrofitting of existing buildings, Frontiers in Built Environment, Vol. 9.
10. Cavalieri, F. (2023). Infrastructure-specific evaluation of building downtime due to earthquake-induced utility disruption. International Journal of Disaster Risk Reduction, 95, 103875. DOI: https://doi.org/10.1016/j.ijdrr.2023.103875
11. Cavalieri, F., Bellotti, D. & Nascimbene, R. (2023). Seismic vulnerability of existing precast buildings with frictional beam-to-column connections, including treatment of epistemic uncertainty. Bull Earthquake Eng 21, 1117 – 1138. https://doi.org/10.1007/s10518-022-01574-x
12. Cavalieri, F., Bellotti, D., Caruso, M., Nascimbene, R. (2023). Comparative evaluation of seismic performance and environmental impact of traditional and dissipation-based retrofitting solutions for precast structures. Journal of Building Engineering, 79, 107918. DOI: https://doi.org/10.1016/j.jobe.2023.107918
13. Cavalieri, F., Franchin, P., Giovinazzi, S. (2023). Multi-hazard assessment of increased flooding hazard due to earthquake-induced damage to the natural drainage system. Reliability Engineering & System Safety, 237, 109348. DOI: https://doi.org/10.1016/j.ress.2023.109348
14. Dacarro F., S. Peloso, D. Bolognini, M. Furinghetti, G.M. Calvi (2023). First Trial of a Mechanical System for Experimental Shake Table Dynamic Tests on Real Scale Structures, Journal of Earthquake Engineering, DOI: https://doi.org/10.1080/13632469.2023.2174775
15. Damiani, N, DeJong, MJ, Albanesi, L, Penna, A, Morandi, P. (2023). Distinct element modeling of the in-plane response of a steel-framed retrofit solution for URM structures. Earthquake Engng Struct Dyn. 2023; 52: 3030 – 3052. https://doi.org/10.1002/eqe.3910
16. Deyanova, M., Bellotti, D., Nascimbene, R. and Pampanin S. (2023). Performance-based assessment of slender reinforced concrete columns typical of precast industrial buildings. Bull Earthquake Eng 21, 433 – 471. https://doi.org/10.1007/s10518-022-01542-5
17. Di Meo A., Faravelli M., Pascale V., Borzi B., Calderini C., Sisti R., Speranza E., Bocchi F. (2023). Damage survey on churches: A new Observed Damage Database of past Italian earthquakes (Da.D.O.), International Journal of Disaster Risk Reduction, 2023, 103595, ISSN 2212-4209, https://doi.org/10.1016/j.ijdrr.2023.103595
18. Ding, J.Y., Feng, D.C., Brunesi, E., Parisi, F., Wu, G. (2023). Efficient seismic fragility analysis method utilizing ground motion clustering and probabilistic machine learning. Engineering Structures, 2023, 294, 116739.
19. Faravelli M., Borzi B., Onida M., Cattari S., Alfano S., Masi A., Manfredi V., Lagomarsino S. (2023). An Italian platform for the seismic risk assessment of school buildings, Procedia Structural Integrity, Volume 44, 2023, Pages 107-114, ISSN 2452-3216, https://doi.org/10.1016/j.prostr.2023.01.015
20. Faravelli M., Bozzoni F., Zuccolo E., Di Meo A., Quaroni D., Polli D., Rodriguez-Plata R., Martelli L., Borzi B., Lai C.G. (2023). A WebGIS platform for managing the seismic risk at regional scale: the case study of the Emilia-Romagna Region, Procedia Structural Integrity, Volume 44, 2023, Pages 43-50, ISSN 2452-3216, https://doi.org/10.1016/j.prostr.2023.01.007
21. Faravelli M., Antonella di Meo, Mauro Onida, Barbara Borzi, Improvement and updating of the SP-BELA method for the vulnerability assessment of masonry and RC buildings, International Journal of Disaster Risk Reduction, https://doi.org/10.1016/j.ijdrr.2023.104078
22. Fox MJ, Furinghetti M, Pavese A. (2023) Application of the new Italian assessment guidelines to a 1960s prestressed concrete road bridge. Structural Concrete. 2023; 24(1): 583 – 598. https://doi.org/10.1002/suco.202200884
23. Furinghetti, M., Mansour, S., Marra, M., Silvestri, S., Lanese, I., Weber, F., Pavese, A. (2023). Shaking table tests of a full-scale base-isolated flat-bottom steel silo equipped with curved surface slider bearings, Soil Dynamics and Earthquake Engineering, DOI: https://doi.org/10.1016/j.soildyn.2023.108321
24. Furinghetti M., Pavese A. (2023). Experimental Validation of Fast Design Rules for Curved Surface Slider Devices through the Hybrid Simulation Technique, Procedia Structural Integrity, Volume 44, 2023, Pages 1490-1497, https://doi.org/10.1016/j.prostr.2023.01.191
25. Furinghetti, M., Reale, S., Fox, M.J., Pavese (2023). Numerical Assessment of the Seismic Vulnerability of Bridges within the Italian Road Network, Applied Sciences (Switzerland), DOI: https://doi.org/10.3390/app13148194
26. Gabbianelli G., Milanesi R.R., Gandelli E., Dubini P., Nascimbene R., Seismic vulnerability assessment of steel storage tanks protected through sliding isolators (2023). Earthquake Engineering and Structural Dynamics, 52 (9), pp. 2597 – 2618. DOI: 10.1002/eqe.3885
27. Lagomarsino S., Cattari S., Angiolilli M., Bracchi S., Rota M., Penna A. (2023). Modelling and seismic response analysis of existing URM structures. Part 2: archetypes of Italian historical buildings, Journal of Earthquake Engineering, Vol. 27, No. 7, pp. 1849 – 1874.
28. Longo, F., Perrone, D., Brunesi, E., Peloso, S., Aiello, M.A. (2023). A simplified framework to generate fragility functions for in-plane behavior of gypsum partition walls. Lecture Notes in Civil Engineering, 2023, 309 LNCE, pp. 771 – 781.
29. Manzini C.F., Morandi P., Magenes G. (2023). SAM-II: Development and validation of an EF-based program for seismic pushover analysis of masonry buildings, Bulletin of Earthquake Engineering, DOI: https://doi.org/10.1007/s10518-023-01767-y
30. Mohammadi, A., Karimzadeh, S., Monteiro, R., Banimahd, S.A., Ozsarac, V., and Lourenço, P.B. (2023). The potential of region-specific machine-learning-based ground motion models: application to Turkey. Soil Dynamics and Earthquake Engineering, 172, 108008. doi: https://doi.org/10.1016/j.soildyn.2023.108008
31. Morandi P., Albanesi L., Damiani N., Manzini C.F., Magenes G. (2023). In-plane seismic performance of an innovative steel modular reinforcement system for URM walls, Procedia Structural Integrity, 44, 1060-1067, ISSN 2452-3216, DOI: https://doi.org/10.1016/j.prostr.2023.01.137
32. Morandini, C., Malomo, D., Pinho, R., & Penna, A. (2023). Development and validation of a numerical strategy for the seismic assessment of a timber retrofitting solution for URM cavity-wall buildings. Journal of Earthquake Engineering, 27(8), 2224 – 2243 https://doi.org/10.1080/13632469.2022.2104960
33. Ntinalexis M., Kruiver P.P., Bommer J.J., Ruigrok E., Rodriguez-Marek A., Edwards B., Pinho R., Spetzler J., Hernandez E.O., Pefkos M., Bahrampouri M., van Onselen E.P., Dost B., van Elk J. (2023). A database of ground motion recordings, site profiles, and amplification factors from the Groningen gas field in the Netherlands, Earthquake Spectra, Vol. 39, No. 1, pp. 687 – 701.
34. O’Reilly G.J., Shahnazaryan D., Dubini P., Brunesi E., Rosti A., Dacarro F., Gotti A., Silvestri D., Mascetti S., Ducci M., Ciucci M., Marino A. (2023). Risk-aware navigation in industrial plants at risk of NaTech accidents. Int. J. Disaster Risk Reduct., 88, 103620. https://doi.org/10.1016/j.ijdrr.2023.103620
35. Orgnoni A, Pinho R., Calvi G.M., Moratti M., Scattarreggia N. (2023). Numerical dynamic characterisation of concrete bridge stays. Earthquake Engineering and Structural Dynamics Vol. 52, No.14, pp. 4466-4488. https://doi.org/10.1002/eqe.3964
36. Ozsarac, V., Monteiro, R., and Calvi, G. M. (2023). Probabilistic seismic assessment of reinforced concrete bridges using simulated records. Structure and Infrastructure Engineering, , 19(4), 554 – 574. https://doi.org/10.1080/15732479.2021.1956551
37. Ozsarac V., Monteiro, R., Askan A. and Calvi G.M. (2023). Impact of local site effects on seismic risk assessment of reinforced concrete bridges. Soil Dynamics and Earthquake Engineering, 164, 107624. doi: https://doi.org/10.1016/j.soildyn.2022.107624
38. Ozsarac, V., Furinghetti, M., and Monteiro, R. (2023). Seismic risk assessment of existing reinforced concrete bridges accounting for uncertainty in bearing properties. Engineering Structures, 293, 116730 doi: https://doi.org/10.1016/j.engstruct.2023.116730
39. Peloso, S., Brunesi, E., Parisi, E.R. (2023). Experimental seismic response characterisation of brackets for use in ventilated façade systems. Lecture Notes in Civil Engineering, 2023, 309 LNCE, pp. 685-695.
40. Peloso, S., Brunesi, E., Perrone, D., Moroni, C. (2023). In-plane seismic fragility models for clay masonry infills in reinforced concrete frames. Structures, 2023, 56, 105043.
41. Polese M., Tocchi G., Dolsek M., Babic A., Faravelli M., Quaroni D., Borzi B., Prota A. (2023). Seismic risk assessment in transboundary areas: the case study on the border between Italy and Slovenia, Procedia Structural Integrity, Volume 44, 2023, Pages 123-130, ISSN 2452-3216, https://doi.org/10.1016/j.prostr.2023.01.017
42. Rota M., Zito M., Bianchi F., Dubini P. (2023). A New Seismic Classification Procedure for Nonstructural Elements Based on Fragility Curves, Buildings, Vol. 13, No. 4, pp. 1017. https://doi.org/10.3390/buildings13041017
43. Rota M., Zito M., Dubini P., Nascimbene R. (2023). On the Use of Accelerometric Data to Monitor the Seismic Performance of Non-Structural Elements in Existing Buildings: A Case Study, Buildings, Vol. 13, No. 10, pp. 2651. https://doi.org/10.3390/buildings13102651
44. Rostamkalaee, S., Peloso, S., Brunesi (2023). Macro-modelling of IP-OoP interaction in unreinforced solid masonry infills under earthquake-induced actions: A review., E. Buildings, 2023, 13(9), 2326.
45. Rosti, A., Brunesi, E., Dacarro, F., Dubini, P., Marino, A., Nosenzo, G., O’Reilly, G.J. (2023). On the quantification of accidental gas release from pressurized vessels. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2023, 7, v007t08a015.
46. Rosti, A., Rota, M., Carbone, C., & Penna, A. (2023). Empirical seismic vulnerability of Italian URM churches hit by the 2016-17 Central Italy earthquake sequence. Procedia Structural Integrity, Volume 44, 2023, Pages 91-98 https://doi.org/10.1016/j.prostr.2023.01.013
47. Rosti A., Smerzini C., Paolucci R., Penna A., Rota M. (2023). Validation of physics-based ground shaking scenarios for empirical fragility studies: the case study of the 2009 L’Aquila earthquake, Bulletin of Earthquake Engineering, Vol. 21, pp. 95-123, https://doi.org/10.1007/s10518-022-01554-1
48. Salvatori, C., Guerrini, G., Senaldi, I., & Penna, A. (2023). Global modeling strategies for masonry buildings with timber diaphragms under seismic actions. Procedia Structural Integrity, 44, 520-527.
49. Sarkis, A.I., Sullivan, T.J., Brunesi, E., Nascimbene, R. (2023). Investigating the effect of bending on the seismic performance of hollow-core flooring. International Journal of Concrete Structures and Materials, 2023, 17(1), 18.
50. Sarkis, A.I., Sullivan, T.J., Brunesi, E., Nascimbene, R. (2023). Assessment of the torsional behavior of hollow-core slabs. Bulletin of the New Zealand Society for Earthquake Engineering, 2023, 56(2), pp. 104-114.
51. Scalvenzi, M., Ravasini, S., Brunesi, E., Parisi, F. (2023). Progressive collapse fragility of substandard and earthquake-resistant precast RC buildings. Engineering Structures, 2023, 275, 115242.
52. Scattarreggia N., Orgnoni A., Pinho R., Moratti M., Calvi G.M. (2023). Failure analysis of the impact of a falling object on a bridge deck, Engineering Failure Analysis, Volume 148, 2023, 107229, ISSN 1350-6307, https://doi.org/10.1016/j.engfailanal.2023.107229
53. Scattarreggia N., Pinho R. Orgnoni A., Lenzo S., Grecchi G., Moratti M., Calvi G.M. (2023). Forensic estimation of the residual capacity and imposed demand on a ruptured concrete bridge stay at the time of collapse, Structures, Vol. 55, pp. 1595-1606.
54. Sironi L., Andreini M., Colloca C., Poehler M., Dacarro F., Bolognini D., Lestuzzi P., Dubois F. (2023). Shaking table tests on stacked concrete blocks for radiation shielding, Earthquake Structures, v283, https://authors.elsevier.com/sd/article/S0141-0296(23)00309-7
55. Tomić, I., Penna, A., DeJong, M. et al. Shake table testing of a half-scale stone masonry building aggregate. Bull Earthquake Eng (2023). https://doi.org/10.1007/s10518-023-01810-y
56. Tomić, I., Penna, A., DeJong, M. et al. Shake-table testing of a stone masonry building aggregate: overview of blind prediction study. Bull Earthquake Eng (2023). https://doi.org/10.1007/s10518-022-01582-x
57. Yepes-Estrada C, Calderon A, Costa C, Crowley, H., Dabbeek J., Hoyos M.C., Martins L. Paul N., Rao A., Silva V. (2023). Global building exposure model for earthquake risk assessment, Earthquake Spectra. doi: https://doi.org/10.1177/87552930231194048
58. Zhou Z., Andreini M., Sironi L., Lestuzzi P., Andò E., Dubois F., Bolognini D., Dacarro F., and Andrade J.E. (2023). Discrete Structural Systems Modeling: Benchmarking of LS-DEM and LMGC90 with Seismic Experiments, Journal of Engineering Mechanics, 149(12), 04023097.

  

Articoli in conferenze internazionali

59. Albanesi L., Damiani N., Manzini C.F., Morandi P. (2023). Experimental numerical in-plane seismic behaviour of an innovative steel reinforcement system for URM walls, Proc. of the 2nd Croatian Conference on Earthquake Engineering, Zagreb, Croatia, DOI: https://doi.org/10.5592/CO/2CroCEE.2023.122
60. Bellotti, D., Cavalieri, F., Nascimbene, R. (2023). Seismic retrofitting of precast industrial buildings through energy dissipation devices. COMPDYN 2023 – 9th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Athens (Greece), 12-14 June 2023.
61. Bracchi S., Rota M., Penna A. (2023). Seismic analysis of reinforced masonry buildings using a novel modelling strategy, Proceedings SECED Conference, 14-15 September, Cambridge, UK.
62. Bruschi, E., Quaglini, V., Furinghetti, M., Pavese, A. (2023). Advanced Modelling and Risk Analysis of a RC Building equipped with Energy Dissipation Devices designed by the Italian Seismic Code, 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2023, Athens.
63. Bozzoni F. (2023). Smart monitoring system for improving the resilience of Milan Malpensa Int’l Airport. European Transport Conference, Milan, Italy, 6-8 September 2023.
64. Caruso, M., Cavalieri, F., Bellotti, D., Nascimbene, R. (2023). Life cycle environmental impact of traditional and innovative retrofitting strategies for precast concrete structures. 3rd fib Symposium on Concrete and Concrete Structures. Turin (Italy), 9-10 November 2023.
65. Caruso M., Couto R., Pinho R., Monteiro R. (2023). Decision-making procedures for optimal seismic-energy integrated retrofitting of buildings, Proceedings of the 8th International Symposium on Life-Cycle Civil Engineering (IALCEE 2023), Milano, Italy.
66. Cavalieri, F., Bellotti, D., Caruso, M., Nascimbene, R. (2023). Seismic response analysis of precast structures retrofitted with dissipation devices, including qualitative assessment of environmental impact. IALCCE2023 – Eighth International Symposium on Life-Cycle Civil Engineering. Milan (Italy), 2-6 July 2023. In: Biondini F., Frangopol D.M. (eds) Life-Cycle of Structures and Infrastructure Systems. CRC Press, London.
67. Damiani N., DeJong M.J., Albanesi L., Magenes G., Penna A., Morandi P. (2023). In-plane response of a modular retrofit system for URM walls using DEM (2023) 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2023, Athens, 12-14 June 2023.
68. Dondi, P., Senaldi, I., Lombardi, L., Piastra, M. (2023). Many-to-Many Metrics: A New Approach to Evaluate the Performance of Structural Damage Detection Networks. In: Foresti, G.L., Fusiello, A., Hancock, E. (eds) Image Analysis and Processing – ICIAP 2023. ICIAP 2023. Lecture Notes in Computer Science, vol 14234. Springer, Cham. https://doi.org/10.1007/978-3-031-43153-1_13
69. Fontana C., Caruso M., Pinho R., Menardo F., Rebecchi G., Bussini A. (2023). Life cycle benefits of seismic protection using a novel active mass damper, Proceedings of the 8th International Symposium on Life-Cycle Civil Engineering (IALCEE 2023), Milano, Italy.
70. Furinghetti, M. (2023). Definition of a design procedure of seismic isolation systems based on rubber bearings, IALCCE2023, Eighth International Symposium on Life-Cycle Civil Engineering, Milan, DOI: 10.1201/9781003323020-181
71. Furinghetti, M., Reale, S., Fox, M.J., Fan, Y., Casarotti, C., and Pavese, A. (2023). Analysis of the force response of bearing devices for bridge structures. COMPDYN 2023 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Athens, Greece, 12-14 June 2023.
72. Gandelli E., Gabbianelli G., Milanesi R., Dubini P., Nascimbene R., Pavese A. (2023). Refined Numerical Modelling of Steel Storage Tanks Implementing Sliding Isolators. In: Proceedings of the 2022 Eurasian OpenSees Days. EOS 2022. Lecture Notes in Civil Engineering, vol 326. Springer, Cham. https://doi.org/10.1007/978-3-031-30125-4_15
73. Guerrini G., Graziotti F., Rota M., Penna A. (2023). Seismic protection of cultural heritage building contents by kinematic isolation devices, Proceedings 9th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering Methods in Structural Dynamics and Earthquake Engineering (COMPDYN), 12-14 June, Athens, Greece.
74. Kurukulasuriya M., Milanesi R., Magenes G., Bolognini D., Grottoli L., Dacarro F., Morandi P. (2023). Investigation of seismic behaviour of existing masonry infills through combined cyclic in-plane and dynamic out-of-plane tests, 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2023, Athens, 12-14 June 2023.
75. Kurukulasuriya, M., Milanesi, R., Morandi, P., & Magenes, G. (2023). Investigation of out-of-plane seismic behaviour of existing masonry infills, Proceedings of the 2 nd Croatian Conference on Earthquake Engineering – 2CroCEE Zagreb, Croatia – March 22 to 24, 2023 Copyright ©2023 CroCEE DOI: https://doi.org/10.5592/CO/2CroCEE.2023.135
76. Merino R.J., Dacarro F., Dubini P., Graziotti F., Grottoli L., Lanese I., Perrone D., Rota M., Nascimbene R., Filiatrault A., (2023). A Shake Table Testing Campaign of Electrical Cabinets. In: Cimellaro, G.P. (eds) Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures. WCSI 2022. Lecture Notes in Civil Engineering, vol 309. Springer, Cham. https://doi.org/10.1007/978-3-031-21187-4_63
77. Milanesi R.R., Guerrini G., Bolognini D., Grottoli L., Dacarro F., Morandi P., (2023). Preliminary results of a shaking-table dynamic test on a repaired and enhanced reinforced concrete infilled structure, 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2023, Athens, 12-14 June 2023.
78. Milanesi R.R., Kurukulasuriya M., Bolognini D., Grottoli L., Dacarro F., Morandi P., (2023). Experimental investigation of seismic behaviour of existing masonry infills, Proceedings of the 2nd Croatian Conference on Earthquake Engineering – 2CroCEE, Zagreb, Croatia – March 22 to 24, 2023.
79. Milanesi R.R., M. Kurukulasuriya, D. Bolognini, L. Grottoli, F. Dacarro, P. Morandi (2023). Experimental Investigation of Seismic Behaviour of Existing Masonry Infills, COMPDYN 2023, 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, M. Fragiadakis (eds.), Athens, Greece, 12-14 June 2023.
80. Nievas, C. I., Crowley, H., Reuland, Y., Weatherill, G., Baltzopoulos, G., Bayliss, K., Chatzi, E., Guéguen, P., Naylor, M., Orlacchio, M., Pejovic, J., Serafini, F., & Serdar, N. (2023). Exploration of state-dependent rapid loss assessment and event-based operational earthquake loss forecasting incorporating structural health monitoring: an open-source tool. Paper presented at SECED 2023 Conference, Cambridge, United Kingdom.
81. Ornthammarath T., Bozzoni F. (2023). Definition of seismic input at an intercontinental airport according to the current European seismic hazard model. The 1st Thailand Symposium on Earthquake Research, TSER, Bangkok, Thailand, October 24-25, 2023.
82. Parisse, F., Buonocunto, V., Cantagallo, C., Di Primio, A., Di Domenico, E., Lo Presti, N., Acconcia, E., Cannizzaro, F., Castellazzi, G., D’Altri, A.M., Liseni, S., Manzini, C.F., Marques, R., Occhipinti, G., Pacella, G., Petracca, M., Silva, L.C., Brandonisio, G., Calderoni, B., Caliò, I., Camata, G., Lourenço, P.B., Milani, G., de Miranda, S., Parisi, F., Magenes, G., Cattari, S. (2023). Investigating the seismic response of URM walls with irregular opening layout through different modeling approaches, COMPDYN 2023, 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, M. Papadrakakis, M. Fragiadakis (eds.) Athens, Greece.
83. Passoni C., Marini A., Riva P., Caruso M., Pinho R. (2023). Life Cycle Structural Engineering: definition of a new tool introducing LCT principles from an early stage of the construction design, Proceedings of the 8th International Symposium on Life-Cycle Civil Engineering (IALCEE 2023), Milano, Italy.
84. Reale, S., Pavese, A., Furinghetti, M. (2023). Vulnerability assessment of bridges within the Italian highway network, IALCCE2023, Eighth International Symposium on Life-Cycle Civil Engineering, Milan, DOI: https://doi.org/10.1201/9781003323020-179
85. Rodriguez, D., Peloso, S., Brunesi, E., Perrone, D., Filiatrault, A. (2023). Seismic numerical modelling of electrical cabinets. COMPDYN 2023, 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, M. Papadrakakis, M. Fragiadakis (eds.), Athens, Greece, 12-14 June.
86. Rosti A, Brunesi E, Dacarro F, Dubini P, Marino A, Nosenzo G, & O’Reilly GJ.(2023). On the Quantification of Accidental Gas Release From Pressurized Vessels. Proceedings of the . Volume 7: Seismic Engineering; ASME Nondestructive Evaluation, Diagnosis and Prognosis (NDPD) Division. Atlanta, Georgia, USA. July 16-21, 2023. V007T08A015. ASME. https://doi.org/10.1115/PVP2023-107249
87. Scalvenzi, M., Parisi, F., Brunesi, E. (2023). The role of infills modelling in progressive collapse capacity assessment of RC buildings: A case study. Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems – Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation, 2023, pp. 527 – 532.
88. Scattarreggia N., Orgnoni A., Calvi G.M., Pinho R., Malomo D., Moratti M. (2023). Failure analysis of ageing RC bridges: the cases of the Polcevera viaduct and the Caprigliola bridge, Proceedings of the 8th International Symposium on Life-Cycle Civil Engineering (IALCEE 2023), Milano, Italy.
89. Sironi L., Andreini M., Zhou Z., Andrade J., Lestuzzi P., Andò E., Dubois F., Dacarro F., Bolognini D. (2023). Seismic Vulnerability Assessment of Concrete Block Configurations for Radiation Shieldind, COMPDYN 2023, 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, M. Papadrakakis, M. Fragiadakis (eds.), Paper ID: C20712, Athens, Greece, 12-14 June.
90. Vlatko, S., Apostolska, R., Salic, R., Vitanova, M., Bojadzieva, J., Edip, K., Stojmanovska, M., Bogdanovic, A., Jekic, G., Borzi, B., Zuccolo, E., Bozzoni, F., di Meo, A., Pitilakis, D., Riga, E., Fotopoulou, S., Petridis, C., Stefanoski, S., Shkodrani, N., Baballëku, M. (2023). Multi-hazard risk assessment of basic services and transport infrastructure in RN Macedonia, Greece and Albania cross-border region – CRISIS project. Proceedings, fib Symposium 2023, Building for the future: Durable, Sustainable, Resilient, Istanbul, Turkey, June 5-7, 2023.
91. Wanigarathna, N., Jones, K., Mulder, F., Borzi, B., Bozzoni, F., Festa, E. (2023). Economic appraisal standards for planning earthquake early warning infrastructure acquisition. CIB W070 Conference on Facility Management and Maintenance 2023, IOP Conf. Series: Earth and Environmental Science 1176 (2023), doi: https://doi.org/10.1088/1755-1315/1176/1/012030

 

Altro

92. Bolognini D., Dacarro F. (2023). Construction of a 9 DOF system for the seismic performance assessment of non-structural elements, Contribution for SPONSE Newsletter #11.
93. Manzini C.F., Albanesi L., Morandi P. (2023). Studio del comportamento sismico di murature portanti rinforzate con sistemi modulari esterni innovativi – Rapporto sperimentale. Rapporto EUCENTRE, Pavia.
94. Bellinzoni M., Morandi P. (2023). La muratura armata: il tumulto del dettaglio nella fase costruttiva, Ingenio-web.

Articoli su rivista internazionale

1. Bosio, M., Di Salvatore, C., Bellotti, D., Capacci, L., Belleri, A., Piccolo, V., Cavalieri F., Dal Lago B., Riva P., Magliulo G., Nascimbene R, Biondini, F. (2023). Modelling and seismic response analysis of non-residential single-storey existing precast buildings in Italy , Journal of Earthquake Engineering, 27(4), 1047-1068, DOI: 10.1080/13632469.2022.2033364
2. Bozzoni, F., Furiosi, A., Lai, C.G. (2022). Probabilistic assessment of the earthquake-induced soil liquefaction hazard at national scale: macrozonation of the Italian territory, Natural Hazards. https://doi.org/10.1007/s11069-022-05636-w
3. Cardone, D., Viggiani, L.R.S., Perrone, G., Telesca, A., Di Cesare, A., Ponzo, F.C., Ragni L., Micozzi F., Dall’Asta A., Furinghetti M., Pavese, A. (2022). Modelling and Seismic Response Analysis of Existing Italian Residential RC Buildings Retrofitted by Seismic Isolation, Journal of Earthquake Engineering, https://doi.org/10.1080/13632469.2022.2036271
4. Chersich, M., Bolognini, D., Curone, D., Dacarro, F., Devoti, R. (2022). A Calibration-Free Astrometric Clinometer for Static Monitoring, Geomatics for Green and Digital Transition, https://doi.org/10.1007/978-3-031-17439-1_4
5. Cavalieri, F., Bellotti, D. & Nascimbene, R. (2023). Seismic vulnerability of existing precast buildings with frictional beam-to-column connections, including treatment of epistemic uncertainty, Bulletin of Earthquake Engineering 21, 1117 – 1138, https://doi.org/10.1007/s10518-022-01574-x
6. Cavalieri, F., Donelli, G., Pinho, R., Dacarro, F., Bernardo, N., De Nigris, M. (2022). Shake Table Testing of Voltage and Current Transformers and Numerical Derivation of Corresponding Fragility Curves, Infrastructures 2022, 7(12), 171; https://doi.org/10.3390/infrastructures7120171
7. Cosentini, R., Bozzoni, F. (2022). Fragility curves for rapid assessment of earthquake-induced damage to earth-retaining walls starting from optimal seismic intensity measures, Soil Dynamics and Earthquake Engineering, Vol. 152, January 2022, 107017, https://doi.org/10.1016/j.soildyn.2021.107017
8. Cremen, G., Bozzoni, F., Pistorio, S., Galasso, C. (2022). Developing a risk-informed decision-support system for earthquake early warning at a critical seaport, Reliability Engineering & System Safety, 218, Part A, https://doi.org/10.1016/j.ress.2021.108035
9. Dacarro, F., Peloso, S., Bolognini, D., Furinghetti, M, Calvi, G.M. (2022). First Trial of a Mechanical System for Experimental Shake Table Dynamic Tests on Real Scale Structures, Journal of Earthquake Engineering, https://doi.org/10.1080/13632469.2023.2174775
10. Dacarro, F., Peloso, S., Bolognini, D., Furinghetti, M, Calvi, G.M. (2023). First Trial of a Mechanical System for Experimental Shake Table Dynamic Tests on Real Scale Structures, Journal of Earthquake Engineering, https://doi.org/10.1080/13632469.2023.2174775
11. Degrendele, C., Mikes, O., Harnych, J., Friedrich, R., Kontic, D., Lammel, G., Maneva Mitrovikj, K., Neuhaeuser, J., Sanka, O., Schmid, D., Gotti, A., Sarigiannis, D., Klanova, J. (2022). Influence of four policy measures on the emissions of atmospheric pollutants and greenhouse gases for a central European city, Fresenius Environmental Bulletin, Volume 31 – No. 08 A – 2022, pp. 08258-08557.
12. Fagà, G., Casarotti, C. (2022). A fast assessment methodology for screening of local civil protection plans on a territorial scale basis: a case study of an Italian province, International Journal of Disaster Risk Reduction. Vol. 81, 2022 https://doi.org/10.1016/j.ijdrr.2022.103284
13. Feng, D.C., Zhang M.X., Brunesi, E., Parisi, F., Yu, J., Zhou, Z. (2022). Investigation of 3D effects on dynamic progressive collapse resistance of RC structures considering slabs and infill walls, Journal of Building Engineering 2022; 54, 104421.
14. Fox, M.J., Furinghetti, M., Pavese, A. (2022). Application of the new Italian assessment guidelines to a 1960s prestressed concrete road bridge, Structural Concrete, DOI: 10.1002/suco.202200884*
15. Furinghetti, M. (2022). Definition and Validation of Fast Design Procedures for Seismically Isolated Systems, Vibration (MDPI), DOI: 10.3390/vibration5020017
16. Furinghetti, M., Lanese, I., Pavese, A. (2022). Experimental Hybrid Simulation of Severe Aftershocks Chains on Buildings Equipped with Curved Surface Slider Devices, Buildings 2022, 12, 1255. https://doi.org/10.3390/
17. De Marco, M., Bozzoni, F., Lai, C.G. (2022). Empirical Magnitude-Upper Bound Distance Curves of Earthquake Triggered Liquefaction Occurrence in Europe, in: Wang, L., Zhang, JM., Wang, R. (eds) Proceedings of the 4th International Conference on Performance Based Design in Earthquake Geotechnical Engineering (Beijing 2022). PBD-IV 2022. Geotechnical, Geological and Earthquake Engineering, vol 52. Springer, Cham. https://doi.org/10.1007/978-3-031-11898-2_169
18. Haslinger, F., Basili, R., Bossu, R., Cauzzi, C., Cotton, F., Crowley, H., Custodio, S., Danciu, L., Locati, M., Michelini, A., Molinari, I., Ottemöller, L., Parolai, S. (2022). Coordinated and Interoperable Seismological Data and Product Services in Europe: the EPOS Thematic Core Service for Seismology, Annals of Geophysics, https://doi.org/10.4401/ag-8767
19. Kocman, D., Kanduč, T., Novak, R., Robinson, J.A., Mikeš, O., Degrendele, C., Sanka, O., Prokeš, J.R., Vienneau, D., Flückige, B., Gotti, A., et al. (2022). Multi-sensor data collection for personal exposure monitoring: ICARUS experience, Fresenius Environmental Bulletin, Volume 31 – No. 08 A – 2022, pp. 08258-08557
20. Lagomarsino, S., Cattari, S., Angiolilli, M., Bracchi, S., Rota, M., Penna, A. (2022). Modelling and seismic response analysis of existing URM structures. Part 2: historical buildings, Journal of Earthquake Engineering, https://dx.doi.org/10.1080/13632469.2022.2087800*
21. Mandirola, M., Casarotti, C., Peloso, S., Lanese, I., Brunesi, E., Senaldi, I. (2022). Use of UAS for damage inspection and assessment of bridge infrastructures, International Journal of Disaster Risk Reduction, Vol. 72, 2022, 102824, ISSN 2212-4209, https://doi.org/10.1016/j.ijdrr.2022.102824
22. Manfredi, V., Masi, A., Özcebe, A.G., Paolucci, R. and Smerzini, C., (2022). Selection and spectral matching of recorded ground motions for seismic fragility analyses, Bulletin of Earthquake Engineering, 20, 4961 – 4987, https://doi.org/10.1007/s10518-022-01393-0
23. Meisina, C., Bonì, R., Bozzoni, F., Conca, D., Perotti, C., Persichillo, P., Lai, C.G. (2022). Mapping soil liquefaction susceptibility across Europe using the analytic hierarchy process, Bulletin of Earthquake Engineering, https://doi.org/10.1007/s10518-022-01442-8
24. Meisina, C., Bonì, R., Bordoni, M., Lai, C.G., Bozzoni, F., Cosentini, R.M., Castaldini, D., Fontana, D., Lugli, S., Ghinoi, A., Martelli, L., Severi, P. (2022). 3D Engineering Geological Modeling to Investigate a Liquefaction Site: An Example in Alluvial Holocene Sediments in the Po Plain, Italy, Geosciences 2022, 12, 155, https://doi.org/10.3390/geosciences12040155
25. Morandi, P., Albanesi, L., Damiani, N., Manzini, C.F., Magenes, G. (2023) “In-plane seismic performance of an innovative steel modular reinforcement system for URM walls”, Procedia Structural Integrity, 44, 1060-1067.
26. Morandi, P., Butenweg, C., Breis, K., Beyer, K., Magenes, G. (2022). Latest findings on the behaviour factor q for the seismic design of URM buildings, Bulletin of Earthquake Engineering 20, 5797 – 5848, https://doi.org/10.1007/s10518-022-01419-7
27. Manzini, C. F., Ottonelli, D., Degli Abbati, S., Marano, C., & Cordasco, E. A. (2022). Modelling the seismic response of a 2-storey URM benchmark case study: comparison among different equivalent frame models, Bulletin of Earthquake Engineering, 20(4), 2045-2084.
28. Nunez Corcuera, B., Navarro-Ligero, M.L., Boldo, E., Sarigiannis, D., Gotti, A., Garcia Dos Santos, S., Soria-Lara, J.A. (2022). A participatory scenario building application for greener, smarter, and healthier cities: the case of Madrid, Spain, Fresenius Environmental Bulletin, Volume 31 – No. 08 A – 2022, pp. 08258-08557.
29. O’Reilly, G.J., Shahnazaryan, D., Dubini, P., Brunesi E., Rosti, A., Dacarro, F., Gotti, A., Silvestri, D., Mascetti, S., Ducci, M., Ciucci, M., Marino, A. (2023). Risk-aware navigation in industrial plants at risk of NaTech accidents, International Journal of Disaster Risk Reduction 2023; 88, DOI: https://doi.org/10.1016/j.ijdrr.2023.103620
30. O’Reilly, G.J., Shahnazaryan, D., Dubini, P., Brunesi, E., Rosti, A., Dacarro, F., Gotti, A., Silvestri, D., Mascetti, S., Ducci, M., Ciucci, M., Marino, A. (2023). Risk-aware navigation in industrial plants at risk of NaTech accidents, International Journal of Disaster Risk Reduction 2023; 88,103620.
31. O’Reilly, G.J., Shahnazaryan, D., Al Mouayad Bellah Nafeh, Ozsarac, V., Sarigiannis, D., Dubini, P., Dacarro, F., Gotti, A., Rosti, A., Silvestri, D., Brunesi, E., Mascetti, S., Ducci, M., Carletti, D., Ciucci, M., Marino, A. (2022). Utilization of a sensor array for the risk-aware navigation in industrial plants at risk of natech accidents American Society of Mechanical Engineers, Pressure Vessels and Piping Division, vol. 5, 2022. https://doi.org/10.1115/PVP2022-84014
32. Ottonelli, D., Manzini, C. F., Marano, C., Cordasco, E. A., & Cattari, S. (2022). A comparative study on a complex URM building: part I—sensitivity of the seismic response to different modelling options in the equivalent frame models. Bulletin of Earthquake Engineering, 20(4), 2115-2158.
33. Özcebe, A.G., Tiganescu, A., Ozer, E., Negulescu, C., Galiana-Merino, J.J., Tubaldi, E., Toma-Danila, D., Molina, S., Kharazian, A., Bozzoni, F. and Borzi, B. (2022). Raspberry Shake-based rapid structural identification of existing buildings subject to earthquake ground motion: the case study of Bucharest, Sensors, 22(13), p.4787, https://doi.org/10.3390/s22134787
34. Özcebe, A.G., Bozzoni, F. and Borzi, B. (2022). Seismic Vulnerability Assessment of Critical Port Infrastructure Components by Modelling the Soil-Wharf-Crane Interaction, Infrastructures, 7(8), p.102, https://doi.org/10.3390/infrastructures7080102
35. Ozer, E., Özcebe, A.G., Negulescu, C., Kharazian, A., Borzi, B., Bozzoni, F., Molina, S., Peloso, S., Tubaldi, E. (2022). Vibration-Based and Near Real-Time Seismic Damage Assessment Adaptive to Building Knowledge Level, Buildings, 12, 416. https://doi.org/10.3390/buildings12040416
36. Penna, A., Rota, M., Bracchi, S., Angiolilli, M., Cattari, S., Lagomarsino, S. (2022) Modelling and seismic response analysis of existing URM structures. Part 1: modern buildings, Journal of Earthquake Engineering. https://doi.org/10.1080/13632469.2022.2095060
37. Penna, A., Rosti, A., Rota, M. (2022). Seismic Response of Masonry Building Aggregates in Historic Centres: Observations, Analyses and Tests, Geotechnical, Geological and Earthquake Engineering, 50, pp. 19-36.
38. Perrone, D., Rodriguez, D., Filiatrault, A., Brunesi, E., Beiter, C., Piccinin, R. (2022). A framework for the quantification of non-structural seismic performance factors, Journal of Earthquake Engineering 2022; 26, 8468-8494.
39. Persico, M.G., Gotti, A., Bugnoni, F., Visave, J., Karakitsios,S., Sakellaris, I., Bartzis, J., Neuhaeuser, J., Friedrich, R., Maccagnan, A., Taylor, T., Sarigiannis, D. (2022). Air pollution health impact assessment and cost-benefit analysis of win-win policy solutions at the urban scale in the city of Milan, Fresenius Environmental Bulletin, Volume 31 – No. 08 A – 2022, pp. 08258-08557.
40. Quaglini, V., Dubini, P., Furinghetti, M., Pavese, A. (2022). Assessment of scale effects in the experimental evaluation of the coefficient of friction of sliding isolators, Journal of Earthquake Engineering, vol. 26, no. 1, pp. 525 – 545, 2022. https://doi.org/10.1080/13632469.2019.1687054
41. Rebecchi, P., Calvi, M., Bussini, A., Dacarro, F., Bolognini, D., Grottoli, L., Rosti, M., Ripamonti, F., Cii, S. (2022). Full-Scale Shake Table Tests of a Reinforced Concrete Building Equipped with a Novel Servo-Hydraulic Active Mass Damper, Journal of Earthquake Engineering, https://doi.org/10.1080/13632469.2022.2121338
42. Rosti, A., Rota, M., Penna, A. (2022). An empirical seismic vulnerability model, Bulletin of Earthquake Engineering, Vol. 20, No. 8, pp. 4147 – 4173. https://doi.org/10.1007/s10518-022-01374-3
43. Sakellaris, I.A., Bartzis, J.G., Neuhäuser, J., Friedrich, R., Gotti, A., Sarigiannis, D.A., (2022). A novel approach for air quality trend studies and its application to European urban environments: The ICARUS project, Atmospheric Environment, Volume 273, 2022, 118973, ISSN 1352-2310, https://doi.org/10.1016/j.atmosenv.2022.118973
44. Sarkis, A.I., Büker, F., Sullivan, T.J., Elwood, K.J., Brunesi, E., Hogan, L.S. (2022). Aspects affecting the nonlinear behavior of precast prestressed hollow-core units failing in shear, Structural Concrete 2022; 23, 3021-3038.
45. Sarkis, A.I., Sullivan, T.J., Brunesi, E., Nascimbene, R. (2023). Assessment of the torsional behaviour of hollow core slabs, Bulletin of the New Zealand Society for Earthquake Engineering; DOI: 10.5459/bnzsee.1572
46. Sarkis, A.I., Sullivan, T.J., Brunesi, E., Nascimbene, R. (2023). Investigating the effect of bending on the seismic performance of hollow-core flooring, International Journal of Concrete Structures and Materials 2023; 17,18.
47. Sarkis, A.I., Sullivan, T.J., Brunesi, E., Nascimbene, R. (2022). Strategies for finite element modelling of precast pre-stressed hollow-core floors, SESOC Journal 2022; 35(1):204-210.
48. Sarkis, A.I., Sullivan, T.J., Brunesi, E., Nascimbene, R. (2022). Critical modelling criteria for precast pre-stressed hollow-core slabs, Journal of Building Engineering 2022; 54, 104545.
49. Scalvenzi, M., Ravasini, S., Brunesi, E., Parisi, F. (2023). Progressive collapse fragility of substandard and earthquake-resistant precast RC buildings, Engineering Structures 2023; 275, 115242.
50. Silva, V., Brzev, S., Scawthorn, C., Yepes, C., Dabbeek, J., Crowley, H. (2022). A Building Classification System for Multi-Hazard Risk Assessment, International Journal of Disaster Risk Science, DOI: https://doi.org/10.1007/s13753-022-00400-x
51. Visave, J., Persico, M.G., Gotti, A., Bugnoni, F., Karakitsios, S., Sakellaris, I., Bartzis, J., Neuhaeuser, J., Friedrich, R., Maccagnan, A., Taylor, T., Kocman, D., Novak, R., Sarigiannis, D. (2022). “Measuring personal exposure – a Milan case study, Fresenius Environmental Bulletin, Volume 31 – No. 08 A – 2022, pp. 08258-08557.
52. Weatherill, G., Crowley, H., Roullé, A. et al. (2022). Modelling site response at regional scale for the 2020 European Seismic Risk Model (ESRM20), Bulletin of Earthquake Engineering, https://doi.org/10.1007/s10518-022-01526-5
53. Wuijts, S., de Vries, M., Zijlema, W., Hin, J., Elliott, L.R., Breemen, L.D.-V., Scoccimarro, E., de Roda Husman, A.M., Külvik, M., Frydas, I.S., Grellier, J., Sarigiannis, D., Taylor, T., Gotti, A., Nieuwenhuijsen, M.J., Hilderink, H. (2022). The health potential of urban water: Future scenarios on local risks and opportunities, Cities, Volume 125, 2022, 103639, ISSN 0264-2751, https://doi.org/10.1016/j.cities.2022.103639
54. Zito, M., Nascimbene, R, Dubini, P., D’Angela, D., Magliulo, G. (2022). Experimental seismic assessment of nonstructural elements: Testing protocols and novel perspectives, Buildings, vol. 12, no. 11, 2022. https://doi.org/10.3390/buildings12111871

  

Articoli in conferenze internazionali

55. Albanesi, L., Manzini, C.F., Morandi, P. (2022). In-plane cyclic tests of URM walls strengthened with an innovative external steel modular framing system, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
56. Bellotti, D., Cavalieri, F., Nascimbene, R. (2022). Seismic response analysis of precast structures with closure external panels, Fifth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE).
57. Bojadjieva, J., Sheshov, V., Edip, K., Shalic, R., Stojmanovska, M., Apostolska, R., Fotopoulou, S., Pitilakis, D., Shkodrani, N., Babaleku, M., Bozzoni, F., di Meo, A. (2022). Harmonized approach for mapping the earthquake-induced landslide hazard at the cross-border region between N. Macedonia, Greece and Albania, Proceedings of 5th Regional Symposium on Landslides in the Adriatic-Balkan Region Landslide Modelling & Application, under auspices of International Consortium on Landslides. 23-26 March, Rijeka, Croatia. Winner of the first prize for Best paper*.
58. Borzi, B., Bellotti, D., Famà, A., Manzini, C.F., Morandi, P., Pagano, M., Quaroni, D. (2022). Development of web-based tools for multi-scale vulnerability assessment of roadway bridges, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
59. Borzi, B., Faravelli, M., Di Meo, A., Cantoni, A., Onida, M., Pagano, M., Pascale, V., Polli, D., Quaroni, D., Dolce, M., Speranza, E. (2022). IRMA: a multifunction platform for seismic risk and scenario damage calculation in Italy, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
60. Bracchi, S., Rota, M., Penna, A. (2022). Effect of retrofit interventions on the seismic performance of an Italian URM historic building assessed via combined nonlinear static and dynamic procedures, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
61. Dabbeek, J., Crowley, H., Silva, V., Weatherill, G., Paul, N., Nievas, C. (2022). Impact of exposure spatial resolution on seismic loss estimates in regional portfolios, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania*.
62. Calderini, C., Sisti, R., Borzi, B., Speranza, E., Bocchi, F., Di Meo, A., Faravelli, M., Pascale, V., Dolce, M., Prota, A. (2022). Observed Damage Database of past Italian earthquakes (Da.D.O.): extension to Churches, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
63. Cavalieri, F., Donelli, G., Pinho, R., Dacarro, F. (2022). Experimental response of voltage and current transformers tested on shake table, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
64. Cattari, S., Alfano, S., Masi, A., Manfredi, V., Borzi, B., Di Meo, A., Da Porto, F., Saler, E., Dall’Asta, A., Gioiella, L., Di Ludovico, M., Del Vecchio, C., Gattersco, N., Verderame, G., Del Gaudio, C. (2022). Risk assessment of Italian school buildings at national scale: the MARS project experience, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
65. Ebeid, E., Jacobsen, R.H., Schneider-Kamp, P., Taurino, D., Casarotti, C., Mandirola, M., Vom Bogel, G., Guzzini, P., Luminari, N. (2022). Autonomous Drones to Ensure Safety in Transport: Concept and Implementations in SESAR Innovation Days 2022*.
66. Gabbianelli, G., Perrone, D., Brunesi, E., Monteiro, R. (2022). Seismic fragility assessment of steel industrial storage tanks, Proceedings of the ASME 2022 Pressure Vessels and Piping Conference, PVP 2022, vol. 5, v005t08a020, doi: 10.1115/PVP2022-84961
67. Gabbianelli, G., Perrone, D., Brunesi, E., Monteiro, R. (2022). Seismic vulnerability assessment of existing RC building considering infill and material uncertainties, Proceedings of the New Boundaries of Structural Concrete, ACI-NBSC 2022. Lecce, Italy – September 8th to 9th 2022.
68. Gui, Z.X., Feng, D.C., Brunesi, E., Parisi, F. (2022). Corrosion modelling for time-dependent reliability assessment of RC structures under progressive collapse, Proceedings of the 13th International Conference on Structural Safety and Reliability (ICOSSAR 2021-2022), Shanghai, China – September 13th to 17th 2022.
69. Kurukulasuriya, M., Milanesi, R.R., Bolognini, D., Lanese I., Grottoli, L., Magenes, G., Dacarro, F., Morandi, P. (2022). Shaking table experimental campaign on pre-code masonry infills subjected to in-plane and out-of-plane loading, Fifth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), 5-7 December 2022, Palo Alto, California USA.
70. Lanese, I., Bazzini, M., Bolognini, D., Brunesi, E., Dacarro, F., Dubini, P., Grottoli, L., Peloso, S., Rizzo Parisi, E., Rota, M. (2022). New Testing Protocol for Acceleration-and-Drift-Sensitive Non-Structural Elements through the Innovative 9-DOFs Multi-Story Dynamic Testing Facility, Fifth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), 5-7 December 2022, Stanford University, Palo Alto, California (USA).
71. Longo, F., Perrone, D., Brunesi, E., Peloso, S., Aiello, M.A. (2022). A Simplified Framework to Generate Fragility Functions for In-Plane Behavior of Gypsum Partition Walls, in: Cimellaro, G.P. (eds) Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures. WCSI 2022. Lecture Notes in Civil Engineering, vol 309. Springer, Cham. https://doi.org/10.1007/978-3-031-21187-4_66
72. Manzini, C. F., Morandi, P., Borzi, B., Iodice, F., Mauro, A., Vecchi, A., Iacobini, F. (2022). Derivation of fragility curves for the seismic vulnerability assessment of railway masonry arch bridges, in: Pellegrino, C., Faleschini, F., Zanini, M.A., Matos, J.C., Casas, J.R., Strauss, A. (eds) Proceedings of the 1st Conference of the European Association on Quality Control of Bridges and Structures, EUROSTRUCT 2021. Lecture Notes in Civil Engineering, vol 200. Springer, Cham.
73. Milanesi R., Morandi P., Hak, S., Magenes, G., (2022). Development and validation of a codified procedure for the seismic verification of masonry infills, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
74. Morandi, P., Albanesi, L., Milanesi, R., Magenes, G. (2022). Definition of performance limit states and in-plane drift capacity of URM walls according to experimental results, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
75. Morandi P., Butenweg C., Breis K., Beyer K., Magenes G., (2022). Behaviour factor q for the seismic design of URM buildings, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
76. Mucedero, G., Brunesi, E., Parisi, F. (2022). Performance-oriented regression models for progressive collapse assessment of buildings with partially-encased composite beams, in: Proceedings of the 13th International Conference on Structural Safety and Reliability (ICOSSAR 2021-2022). Shanghai, China – September 13th to 17th 2022.
77. O’Reilly, G.J., Shahnazaryan, D., Nafeh, A.M.B., Ozsarac, V., Sarigiannis, D., Dubini, P., Dacarro, F., Gotti, A., Rosti, A., Silvestri, D., Brunesi, E., Mascetti, S., Ducci, M., Carletti, D., Ciucci, M., Marino, A. (2022). Utilization of a sensor array for the risk-aware navigation in industrial plants at risk of Natech accidents, in: Proceedings of the ASME 2022 Pressure Vessels and Piping Conference, PVP 2022, vol. 5, v005t08a015, doi: 10.1115/PVP2022-84014
78. Peloso, S., Brunesi, E., Parisi, E.R. (2022). Experimental Seismic Response Characterisation of Brackets for Use in Ventilated Façade Systems, in: Cimellaro, G.P. (eds) Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures. WCSI 2022. Lecture Notes in Civil Engineering, vol 309. Springer, Cham. https://doi.org/10.1007/978-3-031-21187-4_58
79. Peloso, S., Brunesi, E., Rizzo Parisi, E. (2022). Component-test-informed seismic design methodology for façade systems, in: Proceedings of the Fifth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE). Palo Alto, California – December 5th to 7th 2022.
80. Peloso, S., Brunesi, E., Perrone, D., Chichino, B., Sinopoli, G., Moroni, C. (2022). Parametric seismic in-plane fragility models for clay masonry infills in low-to-medium-rise reinforced concrete frames, in: Proceedings of the Fifth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE). Palo Alto, California – December 5th to 7th 2022.
81. Peloso, S., Brunesi, E., Perrone, D. (2022). Derivation of in-plane seismic fragility models for clay masonry infills in reinforced concrete frames, in: Proceedings of the New Boundaries of Structural Concrete, ACI-NBSC 2022. Lecce, Italy – September 8th to 9th 2022.
82. Pelucco, S., Milanesi, R.R., Morandi, P., Bolis, V., Stavridis, A., Magenes, G., Preti, M. (2022). Numerical study on the seismic interaction between innovative ductile masonry infills and RC elements, Fifth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), 5-7 December 2022, Palo Alto, California USA.
83. Prota, A., Dolce, M., Morsut, C., Viegas, D.X., Almeida, M., Casarotti, C., Di Bucci, D., Giuliani, F., Polese, M., Rebora, N. (2022). Good practices in disaster risk and crisis management for civil protection purposes: an integrated multi-hazard risk approach, EGU General Assembly 2022, Vienna, Austria, 23 – 27 May 2022, EGU22-12597.
84. Rodriguez, D., Perrone, D., Filiatrault, A., Brunesi, E. (2022). Absolute acceleration floor response spectra for inelastic buildings: Quantification of amplitude capping and period lengthening, in: Proceedings of the Fifth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE). Palo Alto, California – December 5th to 7th 2022.
85. Rodriguez, D., Perrone, D., Filiatrault, A., Brunesi, E. (2022). A Multivariate Regression Model for Strong Floor Motion Duration, in: Proceedings of the 12th National Conference on Earthquake Engineering, 12 NCEE. Salt Lake City, Utah – June 27th to July 1st 2022.
86. Rosti, A., Rota, M., Carbone, C., Penna, A. (2022). Processing Central Italy 2016-17 damage data to assess seismic vulnerability of Italian churches, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
87. Rosti, A., Rota, M., Penna, A. (2022). Vulnerability classification of the Italian residential building stock based on clustering of observational damage data, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
88. Rosti, A., Del Gaudio, C., Penna, A., Ricci, P., Verderame, G.M., Rota, M. (2022). Derivation of fragility functions of RC building typologies based on Italian observational damage data, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
89. Sapio, S., Jiménez Alvarado, M.J., Taramelli, A., Martina, M., Monteleone, B., Righini, M., Schiavon, E., Arosio, M., Giusti, R., Bianchi, M., Senaldi, I., Casarotti, C., Valentini, E. (2022). Preliminary results of the application of multiple satellite sensors for the study of water resourceS and land subsidence in agricultural areas. Case study: South Lombardy (Italy), The 1st International Electronic Conference on Land.
90. Scalvenzi, M., Brunesi, E., Parisi, F. (2022). The role of infills modelling in progressive collapse capacity assessment of RC buildings: A case study, in: Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022). Cape Town, South Africa – September 5th to 7th 2022.
91. Scalvenzi, M., Ravasini, S., Brunesi, E., Parisi, F. (2022). Probabilistic robustness assessment of precast reinforced concrete buildings, in: Proceedings of the 14th fib International PhD Symposium in Civil Engineering. Rome, Italy – September 5th to 7th 2022.
92. Shahnazaryan, D., O’Reilly, G. J., Dubini, P., Dacarro, F., Gotti, A., Mascetti, S., Brunesi, E., Rosti, A., & Silvestri, D. (2022). Integrating multiple risks to aid the navigation of industrial plant workers during seismic events, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
93. Smerzini, C., Rosti, A., Paolucci, R., Penna, A., Rota, M. (2022). Physics-based ground shaking scenarios for seismic fragility analyses: the case study of the 2009 L’Aquila earthquake, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
94. Tiganescu, A., Balan, S.F., Borzi, B., Bozzoni, F., Galiana-Merino, J.J., Kharazian, A., Molina, S., Negulescu, C., Özcebe, A.G., Ozer, E., Peloso, S., Toma-Danila, D., Tubaldi, E. (2022). Techniques and methods for near real-time seismic damage detection, Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology, September 4-9 2022, Bucharest, Romania.
95. Zhang, M.X., Feng, D.C., Brunesi, E., Parisi, F. (2022). Fragility assessment of progressive collapse resistance of buildings using machine learning-based surrogate modelling, in: Proceedings of the 13th International Conference on Structural Safety and Reliability (ICOSSAR 2021-2022). Shanghai, China – September 13th to 17th 2022.

 

Articoli in conferenze nazionali

96. Bracchi, S., Rota, M., Penna, A. (2022). Comparison of refined and code-compliant modelling strategies for the seismic analysis of unreinforced masonry buildings, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
97. Bracchi, S., Rota, M., Penna, A. (2022). A methodology for the calibration of partial safety factors accounting for knowledge level, in pushover-based seismic assessment of URM buildings according to the new draft of Eurocode 8, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
98. Del Gaudio, C., Rosti, A., Penna, A., Ricci, P., Rota, M., Verderame, G.M. (2022). Empirically based approaches for the derivation of fragility curves of Italian RC building typologies, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
99. Faravelli, M., Borzi, B., Onida, M., Cattari, S., Alfano, S., Masi, A., Manfredi, V., Lagomarsino, S. (2022). An Italian platform for the seismic risk assessment of school buildings, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
100. Faravelli, M., Bozzoni, F., Zuccolo, E., Di Meo, A., Quaroni, D., Polli, D., Rodriguez-Plata, R., Martelli, L., Borzi, B., Lai, C.G. (2022). A WebGIS platform for managing the seismic risk at regional scale: the case study of the Emilia-Romagna Region, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
101. Furinghetti, M., Pavese, A. (2022). Experimental Validation of Fast Design Rules for Curved Surface Slider Devices through the Hybrid Simulation Technique, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
102. Merino, R.J., Dacarro, F., Dubini, P., Graziotti, F., Grottoli, L., Lanese, I., Perrone, D., Rota, M., Nascimbene, R., Filiatrault, A. (2022). A Shake Table Testing Campaign of Electrical Cabinets Proceedings of XIX Convegno ANIDIS, September 11-15th 2022, Torino (TO), Italy.
103. Polese, M., Tocchi, G., Dolsek, M., Babic, A., Faravelli, M., Quaroni, D., Borzi, B., Prota, A. (2022). Seismic risk assessment in transboundary areas: the case study on the border between Italy and Slovenia, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
104. Rosti, A., Rota, M., Penna, A. (2022). Clustering of empirical damage data for the vulnerability classification of the Italian residential building stock, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
105. Rosti, A., Rota, M., Carbone, C., Penna, A. (2022). Empirical seismic vulnerability of Italian URM churches hit by the 2016-17 Central Italy earthquake sequence, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
106. Smerzini, C., Rosti, A., Paolucci, R., Penna, A., Rota, M. (2022). On the use of physics-based ground shaking scenarios for empirical fragility assessment: the case-study of the 2009 L’Aquila seismic event, Atti del XIX Convegno Nazionale L’Ingegneria sismica in Italia, 11-15 settembre 2022, Torino.
107. Smerzini, C., Rosti, A., Paolucci, R., Penna, A., Rota, M. (2022). Physics-based ground shaking scenarios for empirical fragility studies: the case-study of the 2009 L’Aquila earthquake Convegno Gruppo Nazionale di Geofisica della Terra Solida (GNGTS), Trieste, 27-29 giugno 2022.

 

Capitoli di libro

108. Crowley, H., Dabbeek, J., Despotaki, V., Rodrigues, D., Martins, L., Silva, V., Romão, X., Pereira, N., Weatherill, G., Danciu, L. (2022). European Seismic Risk Model – Insights and Emerging Research Topics, In book: Progresses in European Earthquake Engineering and Seismology, Springer.
109. Danciu, L., Weatherill, G., Rovida, A., Basili, R., Bard, P.Y, Beauval, C., Nandan, S., Pagani, M., Crowley, H., Marti, M., Reyes, C., Sesetyan, K., Villanova, S., Cotton, F., Wiemer, S., Giardini, D. (2022). The 2020 European Seismic Hazard Model – Milestones and Lessons Learned, in book: Progresses in European Earthquake Engineering and Seismology, Springer.

 

Altro

110. Capone, F., Petrenj, B., Morsut, C., Polese, M., Casarotti, C., Di Bucci, D., Rebora, N., Dolce, M., Prota, A., Viegas, D.X. (2022). ROADMAP Project Thematic Paper 1, DOI: 10.57580/TP1DOI, Good practices in multi-hazard risk scenarios.
111. Di Bucci, D., Casarotti, C., Morsut, C., Polese, M., Rebora, N., Giuliani, F., Rodrigues, T., Viegas, D.X., Fagà, G., Centoducati, C., De Siervo, G., Dolce, M., Gotti, A., Hamidova, E., Kruke, B.I., Prota, A., Ribeiro, L.M., Capone, F., Farabollini, P., Petrenj, B., Rizzoli, V., Tagliacozzo, S. (2022). The RODMAP Vision Paper. ROADMAP Project, 32 pp. DOI: https://doi.org/10.57580/10.57580/VPDOI, “Shared basic elements for a ‘European Doctrine on Disaster Risk and Crisis Management.
112. “Proceedings of the Transnational Access Framework” – Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA Project) – edited by A. Pavese, I. Lanese, E. Rizzo Parisi and G. Fagà. Pavia, Italy. Eucentre, (2022), ISBN 9788885701144.
113. Penna, A., Bracchi, S., Salvatori, C., Morandini, C., Rota, M. (2022). Extending Analysis Capabilities of Equivalent Frame Models for Masonry Structures, Springer Proceedings in Earth and Environmental Sciences, pp. 473-485.
114. Tagliacozzo, S., Farabollini, P., Morsut, C., Casarotti, C., Di Bucci, D., Polese, M., Giuliani, F., Hamidova, E., Rebora, N., Dolce, M., Prota, A., Viegas, D.X. (2022). ROADMAP Project Thematic Paper 3, https://doi.org/10.57580/TP3DOI, “Good practices in Building Back Better and Leave No one Behind.
115. Tagliacozzo, S., Rizzoli, V., Morsut, C., Di Bucci D., Casarotti C., Polese, M., Kruke, B.I., Fagà G., Rebora N., Dolce M., Prota A., Viegas D.X. (2022). ROADMAP Project Thematic Paper 2, DOI: 10.57580/TP2DOI, “Good practices in risk and crisis communication.

Articoli su rivista internazionale

1. Abarca, A., Monteiro, R., O’Reilly, G., Zuccolo, E., Borzi, B. (2021). Evaluation of intensity measure performance in regional seismic risk assessment of reinforced concrete bridge inventories, Structure and Infrastructure Engineering, doi: 10.1080/15732479.2021.1979599
2. Albanesi, L., Morandi, P., 2021, Lateral resistance of brick masonry walls: a rational application of different strength criteria based on in-plane test results, International Journal of Architectural Heritage, DOI: 10.1080/15583058.2021.1992533
3. Andreotti, G., Calvi, GM., (2021). Nonlinear soil effects on observed and simulated response spectra Earthquake Engineering & Structural Dynamics 50 (14), 3831-3854.
4. Bozzoni, F., Bonì, R., Conca, D., Lai, C.G., Zuccolo, E., Meisina, C. (2021). Megazonation of earthquake-induced soil liquefaction hazard in continental Europe, Bulletin of Earthquake Engineering, 19, 4059 – https://doi.org/10.1007/s10518-020-01008-6
5. Bozzoni, F., Bonì, R., Conca, D., Meisina, C., Lai, C.G., Zuccolo, E. (2021). A geospatial approach for mapping the earthquake-induced liquefaction risk at European scale, Geosciences, 11, 32. https://doi.org/10.3390/geosciences11010032
6. Bozzoni, F., Cantoni, A., De Marco M.C., Lai, C.G. (2021). ECLiq: European interactive catalogue of earthquake-induced soil liquefaction phenomena, Bulletin of Earthquake Engineering, 19, 4719 – 4744, https://doi.org/10.1007/s10518-021-01162-5
7. Bressanelli, E., D. Bellotti, A. Belleri, F. Cavalieri, P. Riva, R. Nascimbene, Influence of Modelling Assumptions on the Seismic Risk of Industrial Precast Concrete Structures, Frontiers in Built Environment 7 (2021): 30.
8. Butenweg C., Bursi O.S., Paolacci F., Marinković M., Lanese I., Nardin C., Quinci G. (2021). Seismic performance of an industrial multi-storey frame structure with process equipment subjected to shake table testing, Engineering Structurres https://doi.org/10.1016/j.engstruct.2021.112681 June 2021.
9. Calvi, GM., Moratti, M., Dacarro, F., Andreotti, G., Bolognini, D. (2021). Feasibility study for in-situ dynamic testing of structures and geotechnical systems, Engineering Structures 235, 112085.
10. Calvi, GM., O’Reilly, GJ., Andreotti, G. (2021). Towards a practical loss‐based design approach and procedure, Earthquake Engineering & Structural Dynamics 50 (14), 3741-3753.
11. Casarotti, peloso, Borzi, Pavese. EUCENTRE and seismic emergency: technical preparedness activities and response after the central Italy earthquake. Građevinar 4/2021, https://doi.org/10.14256/JCE.3049.2020Guerrini, G.; Salvatori, C.; Senaldi, I.; Penna, A. Experimental and Numerical Assessment of Seismic Retrofit Solutions for Stone Masonry Buildings. Geosciences 2021, 11, 230. https://doi.org/10.3390/geosciences11060230
12. Chichino B, Peloso S, Bolognini D, Moroni C, Perrone D, Brunesi E. Towards seismic design of nonstructural elements: Italian code-compliant acceleration floor response spectra. Advances in Civil Engineering 2021; 2021,4762110.
13. Cosentini, R., Bozzoni, F. (2021). Fragility curves for rapid assessment of earthquake-induced damage to earth-retaining walls starting from optimal seismic intensity measures. Soil Dynamics and Earthquake Engineering, in press, https://doi.org/10.1016/j.soildyn.2021.107017
14. Cremen, G., Bozzoni, F., Pistorio, S., Galasso, C. (2021). Developing a risk-informed decision-support system for earthquake early warning at a critical seaport. Reliability Engineering and System Safety, in press, https://doi.org/10.1016/j.ress.2021.108035
15. Cremen, G., Zuccolo, E., Galasso, C. (2021). Accuracy and Uncertainty Analysis of Selected Methodological Approaches to Earthquake Early Warning in Europe. Seismological Research Letters; 92 (4): 2321 – 2332. doi: https://doi.org/10.1785/0220200414
16. Crowley, H., Despotaki, V., Silva, V., Dabbeek, J., Romão, X., Pereira, N., Castro, J.M., Daniell, J., Veliu, E., Bilgin, H., Adam, C., Deyanova, M., Ademović, N., Atalic, J., Riga, E., Karatzetzou, A., Bessason, B., Shendova, V., Tiganescu, A., Toma-Danila, D., Zugic, Z., Akkar, S., Hancilar, U. (2021). Model of Seismic Design Lateral Force Levels for the Existing Reinforced Concrete European Building Stock. Bulletin of Earthquake Engineering, DOI: 10.1007/s10518-021-01083
17. Dabbeek, J., Crowley, H., Silva, V., Weatherill, G., Paul, N., Nievas, C. (2021). Impact of exposure spatial resolution on seismic loss estimates in regional portfolios. Bulletin of Earthquake Engineering, 19, pp. 5819-5841, https://doi.org/10.1007/s10518-021-01194-x
18. Da Porto F., Donà M., Rosti A., Rota M., Lagomarsino S., Cattari S., Borzi B., Onida M., De Gregorio D., Perelli F.L., Del Gaudio C., Ricci P., Speranza E. (2021). Comparative analysis of the fragility curves for Italian residential masonry and RC buildings, Bulletin of Earthquake Engineering, Vol. 19, No. 8, pp. 3209 – 3252, https://doi.org/10.1007/s10518-021-01120-1
19. Da Porto F., Morandi P., Magenes G., (2021). La nuova prEN1996-1-1: evoluzione dell’Eurocodice per la progettazione delle strutture in muratura. Structural 236 – Luglio/Agosto 2021 – paper 20. ISSN 2282-3794. https://doi.org/10.12917/STRU236.20
20. Degli Abbati S., Morandi P., Cattari S., Spacone E., 2021. On the reliability of the equivalent frame models: the case study of the permanently monitored Pizzoli’s town hall, Bullettin of Earthquake Engineering (2021). https://doi.org/10.1007/s10518-021-01145-6
21. Dolce, M., Prota, A., Borzi, B. et al. (2021). Seismic risk assessment of residential buildings in Italy. Bull Earthquake Eng 19, 2999 – 3032. https://doi.org/10.1007/s10518-020-01009-5
22. Famà, A., Zuccolo, E., Bozzoni, F., Lai, C.G., Martelli, L. (2021). An inter-disciplinary/multi-step approach in defining the input motion for the seismic analysis of masonry buildings struck by the May 29, 2012 M6.0 Emilia earthquake in Northern Italy, Italian Journal of Geosciences, Vol. 140, pp. 347-364, https://doi.org/10.3301/IJG.2021.08
23. Fasano, G., Nappa, V., Özcebe, A. G., & Bilotta, E. (2021). Numerical modelling of the effect of horizontal drains in centrifuge tests on soil-structure interaction in liquefiable soils. Bulletin of Earthquake Engineering, 1-37, DOI: 10.1007/s10518-021-01084-2
24. Fayjaloun, R., Negulescu, C., Roullé, A., Auclair, S., Gehl, P., Faravelli, M. (2021). Sensitivity of Earthquake Damage Estimation to the Input Data (Soil Characterization Maps and Building Exposure): Case Study in the Luchon Valley, France. Geosciences 2021, 11, 249, https://doi.org/10.3390/geosciences11060249
25. Feng D.C., Shi H.R., Parisi F., Brunesi E., Wang C.L. (2021). Efficient numerical model for progressive collapse analysis of prestressed concrete frame structures. Engineering Failure Analysis 2021; 129,105683.
26. Feng D.C., Xiong C.Z., Brunesi E., Parisi F., Wu G. (2021). Numerical simulation and parametric analysis of precast concrete beam-slab assembly based on layered shell elements. Buildings 2021; 11(1), 7.
27. Filiatrault, D. Perrone, R. Merino, G.M. Calvi (2021). Performance-Based Seismic Design of Non-Structural Building Elements, Journal of Earthquake Engineering, Vol. 25, No. 2, pp. 237 – 269.
28. Furinghetti M., Yang T., Calvi P.M., Pavese A. (2021). Experimental evaluation of extra-stroke displacement capacity for curved surface slider devices. Soil Dynamics and Earthquake Engineering, https://doi.org/10.1016/j.soildyn.2021.106752
29. Gabbianelli G, Perrone D, Brunesi E, Monteiro R. Seismic acceleration demand and fragility assessment of storage tanks installed in industrial steel moment-resisting frame structures. Soil Dynamics and Earthquake Engineering 2022; 152,107016.
30. Gandelli E., Chernyshov S., Distl J., Dubini P., Weber F., Taras A. (2021). Novel adaptive hysteretic damper for enhanced seismic protection of braced buildings, (2021). Soil Dynamics and Earthquake Engineering, 141, DOI: 10.1016/j.soildyn.2020.106522
31. Greco A., Giacometti V., Rota M., Senaldi I.E., Penna A. (2021). Integrated Strategies for Preserving and Enhancing the Historical Heritage of the University of Pavia, Sustainability, Vol. 13, No. 2, p. 783, DOI: 10.3390/su13020783
32. Lai, C.G., Bozzoni, F., Conca, D., Famà, A., Özcebe, A.G., Zuccolo, E., Meisina, C., Bonì, R., Bordoni, M., R.M. Cosentini, L. Martelli, V. Poggi, A. Viana da Fonseca, C. Ferreira, S. Rios, D. Cordeiro, C. Ramos, F. Molina-Gómez, C. Coelho, J. Logar, M. Maček, A. Oblak, F. Ozcep, I. Bozbey, S. Oztoprak, S. Sargin, N. Aysal, C. Oser, Kelesoglu M.K. (2021). Technical guidelines for the assessment of earthquake induced liquefaction hazard at urban scale, Bulletin of Earthquake Engineering, 19, 4013 – 4057. https://doi.org/10.1007/s10518-020-00951-8
33. Mandirola, Casarotti, Peloso, Lanese, Brunesi, Senaldi, Risi, Monti, Facchetti (2021). Guidelines for the use of Unmanned Aerial Systems for fast photogrammetry-oriented mapping in emergency response scenarios. International Journal of Disaster Risk Reduction, 2021 DOI: 10.1016/j.ijdrr.2021.1022
34. Manzini, C.F., Ottonelli, D., Degli Abbati, S., Marano, C., Cordasco, E.A., 2022, Modelling the seismic response of a 2-storey URM benchmark case study: comparison among different equivalent frame models. Bull Earthquake Eng 20, 2045 – 2084 (2022). https://doi.org/10.1007/s10518-021-01173-2
35. Martins, L., Silva, V., Crowley, H. and Cavalieri, F. (202). Vulnerability modeller’s toolkit, an open-source platform for vulnerability analysis. Bulletin of Earthquake Engineering, DOI: 10.1007/s10518-021-01187-w
36. Meletti, C., Marzocchi, W., D’Amico, V., Lanzano, G., Luzi, L., Martinelli, F., Pace, B., Rovida, A., Taroni, M., Visini, F. & the MPS19 Working Group (2021). The new Italian Seismic Hazard Model (MPS19). Annals of Geophisics, 64, 1, SE112, 2021, doi:10.4401/ag-8579
37. Milanesi, R.R., Morandi, P., Hak, S., Magenes, G., 2021, Experiment-based out-of-plane resistance of strong masonry infills for codified applications, Engineering Structures, 242, 112525. https://doi.org/10.1016/j.engstruct.2021.112525
38. Mucedero G, Brunesi E, Parisi F. Progressive collapse resistance of framed buildings with partially encased composite beams. Journal of Building Engineering 2021; 38,102228.
39. Novak, R., Petridis, I., Kocman, D., Gotti, A., Sarigiannis, D. (2021). Harmonization and visualization of data from a transnational multi-sensor personal exposure campaign, International Journal of Environmental Research and Public Health, 2021, 18(21), 11614, https://doi.org/10.3390/ijerph182111614
40. O’Reilly, GJ., Calvi, GM. (2021). A seismic risk classification framework for non-structural elements, Bulletin of Earthquake Engineering 19 (13), 5471-5494.
41. Ottonelli, D., Manzini, C.F., Marano, C., Cordasco, E.A., Cattari, S. (2022). A comparative study on a complex URM building: part I-sensitivity of the seismic response to different modelling options in the equivalent frame models. Bull Earthquake Eng 20, 2115 – 2158 (2022). https://doi.org/10.1007/s10518-021-01128-7
42. Özcebe, A.G., Giretti, D., Bozzoni, F., Fioravante, V. Lai, C.G. (2021). Centrifuge and numerical modelling of earthquake-induced soil liquefaction under free-field conditions and by considering soil – structure interaction, Bulletin of Earthquake Engineering, 19, 47 – 75. https://doi.org/10.1007/s10518-020-00972-3
43. Ozsarac V, Brunesi E, Nascimbene R. Earthquake-induced nonlinear sloshing response of above-ground steel tanks with damped or undamped floating roof. Soil Dynamics and Earthquake Engineering 2021; 144,106673.
44. Ozsarac, V. Monteiro, R., Calvi, GM. (2021). Probabilistic seismic assessment of reinforced concrete bridges using simulated records, Structure and Infrastructure Engineering, 1-21.
45. Parisse, F., S. Cattari, R. Marques, P.B. Lourenço, G. Magenes, K. Beyer, B. Calderoni, G. Camata, E.A. Cordasco, M.A. Erberik, C. İçel, M. Karakaya, D. Malomo, C.F. Manzini, C. Marano, F. Messali, G. Occhipinti, B. Pantò, Ö. Saygılı, M. Sousamli, 2021, Benchmarking the seismic assessment of unreinforced masonry buildings from a blind prediction test, Structures, 31, Pages 982-1005 (2021), ISSN 2352-0124, https://doi.org/10.1016/j.istruc.2021.01.096
46. Perrone D, Rodriguez D, Filiatrault A, Brunesi E, Beiter C, Piccinin R (2021). A framework for the quantification of non-structural seismic performance factors. Journal of Earthquake Engineering, DOI: 10.1080/13632469.2021.1991516
47. Ponzo C.F., Di Cesare A., Telesca A., Pavese A., Furinghetti M. (2021), Advanced Modelling and Risk Analysis of RC Buildings with Sliding Isolation Systems Designed by the Italian Seismic Code. Applied Sciences, DOI: https://doi.org/10.3390/app11041938
48. Ravasini S, Belletti B, Brunesi E, Nascimbene R, Parisi F. Nonlinear dynamic response of a precast concrete building to sudden column removal. Applied Sciences 2021; 11(2), 599.
49. Riga, E., Karatzetzou, A., Apostolaki, S., Crowley, H., Pitilakis, J.K. (2021). Verification of seismic risk models using observed damages from past earthquake events. Bulletin of Earthquake Engineering, DOI: 10.1007/s10518-020-01017-5
50. Robinson, J.A., Novak, R., Kanduč, T., Maggo,s T., Gotti, A., Kocman, D. (2021). User-Centred Design of a Final Results Report for Participants in Multi-Sensor Personal Air Pollution Exposure Monitoring Campaigns, International Journal of Environmental Research and Public Health, MDPI, 2021, 18, 10.3390/ijerph182312544. hal-03537823.
51. Rodríguez D, Brunesi E, Nascimbene R. Fragility and sensitivity analysis of steel frames with bolted-angle connections under progressive collapse. Engineering Structures 2021; 228,111508
52. Rodriguez D, Perrone D, Filiatrault A, Brunesi E. A probabilistic strong floor motion duration model for seismic performance assessment of non-structural building elements. Earthquake Engineering and Structural Dynamics 2021; 50(15):4161-4179.
53. Rodriguez-Plata, R., Özcebe, A. G., Smerzini, C., & Lai, C. G. (2021). Aggravation factors for 2D site effects in sedimentary basins: The case of Norcia, central Italy. Soil Dynamics and Earthquake Engineering, 149, 106854, http://hdl.handle.net/11311/1181095
54. Rossi A., Morandi P., Magenes G. (2021). A novel approach for the evaluation of the economical losses due to seismic actions on RC buildings with masonry infills. Soil Dynamics and Earthquake Engineering, Volume, 145 (2021), 106722, ISSN 0267-7261, https://doi.org/10.1016/j.soildyn.2021.106722
55. Rosti A., Del Gaudio C., Rota M., Ricci P., Di Ludovico M., Penna A., Verderame G.M. (2021). Empirical fragility curves for Italian residential RC buildings, Bulletin of Earthquake Engineering, Vol. 19, No. 8, pp. 3165 – 3183. DOI: 10.1007/s10518-020-00971-4
56. Rosti A., Rota M., Penna A. (2021). Empirical fragility curves for Italian URM buildings, Bulletin of Earthquake Engineering, Vol. 19, No. 8, pp. 3057 – 3076. https://doi.org/10.1007/s10518-020-00845-9
57. Rota M., Bracchi S., Iorio D., Penna A. (2021). Typological seismic fragility assessment of old railway stations by nonlinear time history analysis, Structure and Infrastructure Engineering, Vol. 17, No. 12, pp. 1667-1683. DOI: 10.1080/15732479.2020.1822884
58. Saraga, D., Maggos, T., Degrendele, C., Gotti, A., Sarigiannis, D. (2021). Multi-city comparative PM2.5 source apportionment for fifteen sites in Europe: The ICARUS project, Science of the Total Environment, 2021, 751, 141855.
59. Silvestri, S., Mansour, S., Marra, M., Distl, J., Furinghetti, M., Lanese, I., Hermamdez-Montes E., Neri C., Palermo M., Pavese A., Rizzo Parisi E., Sadowski A.J., Selva F., Taniguchi T., Vadrucci L., Weber F. (2021). Shaking Table Tests of a Full-scale Flat-bottom Manufactured Steel Silo Filled with Wheat: Main Results on the Fixed-base Configuration. Earthquake Eng. Struct. Dyn. 51, 169 – 190. doi:10.1002/eqe.3561
60. Zuccolo, E., O’Reilly, G.J., Poggi, V., Monteiro, R. (2021). haselREC: an automated open-source ground motion record selection and scaling tool. Bull Earthquake Eng 19, 5747 – 5767. https://doi.org/10.1007/s10518-021-01214-w

  

Articoli su rivista nazionale

61. Faravelli, M., Bozzoni, F., Zuccolo, E., Di Meo, A., Quaroni, D., Polli, D., Rodriguez-Plata, R., Martelli, L., Borzi, B., Lai, C.G. (2021). Mesozonazione del rischio sismico: la piattaforma WebGIS di EUCENTRE per la Regione Emilia-Romagna, Progettazione Sismica – Vol. 13, N.3, Anno 2021, https://doi.org/10.7414/PS.13.1.3
62. Manzini, C.F., Albanesi, L., Morandi, P., 2021, Risposta sismica nel piano di murature portanti rinforzate con rivestimento esterno modulare in acciaio, Progettazione Sismica, Vol. 13:4 (2021), 3-23, DOI:10.7414/PS.13.1.4

 

Articoli conferenze internazionali

63. Bozzoni, F., Borzi, B., Curone, D., Dacarro, F., Di Meo, A., Faravelli, M., Festa, E., Lai, C.G., Ozcebe, A.G., Zuccolo, E. (2021). Deployment of a multi-sensor system for real-time seismic monitoring of strategic port facilities in Italy. ESC2021 Virtual 37th General Assembly of the European Seismological Commission, 19-24 September 2021.
64. Brunesi E, Pavese A, Nascimbene R (2021). Seismic performance of above-ground liquid storage tanks. In: Proceedings of the 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan.
65. Butenweg, C., M. Marinkovic, A. Pavese, I. Lanese, E. Rizzo Parisi B. Hoffmeister, M.Pinkawa, C. Vulcu, O. S. Bursi, C. Nardin, F. Paolacci, G. Quinci, M. Fragiadakis, F. Weber, P. Huber, P. Renault, M. Gündel, S. Dyke, M. Ciucci, A. Marino – Seismic Performanc Of Multiple-Component Systems In Special Risk Industrial Facilities – 17WCEE, Sendai, Japan – September 13th to 18th 2020 (conference postponed to September 27th-October 2nd 2021 because of COVID-19 crisis). 2021.
66. Butenweg, C., Oreste S. Bursi, Chiara Nardin, Igor Lanese, Alberto Pavese, Marko Marinković, Fabrizio Paolacci, Gianluca Quinci “Experimental Investigation on the Seismic Performance of a Multi-Component System for Major-Hazard Industrial Facilities”. ASME 2021 Pressure Vessels & Piping Conference July 13 – 15, 2021 Virtual, Online   https://doi.org/10.1115/PVP2021-61696
67. Chersich M., Bolognini D., Curone D., Dacarro F. (2021). A calibration-free astrometric tiltmeter for static SHM, Proceedings of the 10th International Conference on Structural Health Monitoring of Intelligent Infrastructure, SHMII 10, Porto, Portugal, 30 June – 2 July 2021.
68. Cremen, G., Bozzoni, F., Galasso, C., Gehl, P., Ozer, E., Melis, N., Tubaldi, E., Zuccolo, E. (2021). Risk-Informed Decision Making for Earthquake Early Warning. ESC2021 Virtual 37th General Assembly of the European Seismological Commission, 19-24 September 2021.
69. Cremen, G., Galasso, C., Zuccolo, E., (2021). Could earthquake early warning be effective across Europe? ESC2021 Virtual 37th General Assembly of the European Seismological Commission, 19-24 September 2021.
70. Crowley, H., Silva, V., Martins, L., Romão, X. and Pereira, N. (2021). Open models and software for assessing the vulnerability of the European building stock. COMPDYN 2021, 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, streamed from Athens, Greece.
71. Dolce, M., Goretti, A., Germagnoli, F., Borzi, B., Faravelli, M., Quaroni, D. (2021). The SEIS-MEC WebGIS platform: real-time seismic scenarios supporting disaster risk management. 5th DRMKC annual Seminar Towards the science pillar of the Union Civil Protection Knowledge Network, November 17-18, 2021, online.
72. Dubini, P., Dacarro, F., Gotti, A., Ciucci M. (2021). Utilisation of a Sensor Array for the Risk-Aware Navigation in Industrial Plants at Risk of NaTech Accidents, The American Society of Mechanical Engineers (ASME). 2022 Pressure Vessels & Piping Conference.
73. Furinghetti M., Pavese A. (2021). Investigation Of The Response Variability Of a Base-Isolated Building Equipped With Lead Rubber Bearings, 14th World Congress in Computational Mechanics (WCCM). ECCOMAS Congress 2020, Virtual Congress: 11 – 15 January 2021.
74. Furinghetti M., Pavese A. (2021). Modeling Strategies For The Lateral Response Of Curved Surface Slider Devices Under Extreme Displacement Demands, COMPDYN 2021 – 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering.
75. Gabbianelli G, Nicoletti V, Perrone D, Brunesi E (2021). Influence of epistemic uncertainties on the seismic vulnerability assessment of an existing RC building. In: Proceedings of the 2nd fib Symposium on Concrete and Concrete Structures. Rome, Italy.
76. Gabbianelli G, Perrone D, Brunesi E (2021). Influence of beam-to-column connections in seismic vulnerability assessment of steel structures. In: Proceedings of the 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Greece, online.
77. Kruiver, P., Domingo Ballesta, J., Ruigrok, E., Azarbakht, A., Zuccolo, E., Galasso, C., Gehl, P., Douglas, J. (2021). Developing easy-to-understand visualisations for ground shaking estimates within TURNkey. ESC2021 Virtual 37th General Assembly of the European Seismological Commission, 19-24 September 2021.
78. Magenes G., Rossi A., Milanesi R.R., Morandi P., (2021), Economic and technical advantages in the seismic response of rc buildings with innovative infills with sliding joints, 17th World Conference on Earthquake Engineering, Sendai, Giappone, 27/9/21-2/10/21.
79. Marinkovic Marko, Christoph Butenweg, A. Pavese, I. Lanese, B. Hoffmeister, M. Pinkawa, C. Vulcu, O. Bursi, C. Nardin, F. Paolacci, G.Quinci, M. Fragiadakis, F. Weber, P. Huber, P. Renault, M. Gündel, S. Dyke, M. Ciucci, A. Marino Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests. Seismic Design of Industrial Facilities SEDIF CONFERENCE, March, 1-2 2021.
80. Manzini, C.F., Morandi, P., Borzi, B., Iodice, F., Mauro, A., Vecchi, A., Iacobini, F., (2022). Derivation of Fragility Curves for the Seismic Vulnerability Assessment of Railway Masonry Arch Bridges. In: Pellegrino, C., Faleschini, F., Zanini, M.A., Matos, J.C., Casas, J.R., Strauss, A. (eds). Proceedings of the 1st Conference of the European Association on Quality Control of Bridges and Structures. EUROSTRUCT 2021. Lecture Notes in Civil Engineering, vol 200. Springer, Cham. https://doi.org/10.1007/978-3-030-91877-4_102
81. Milanesi, R.R., Bolis, V., Pelucco, S., Morandi, P., Magenes, G., Preti, M., (2021). Local effects due to the seismic interaction between innovative ductile masonry infills and rc elements, Proc. COMPDYN 2021, streamed by Athens, Greece, 27-30 June 2021.
82. Milanesi R.R., Morandi P., Magenes G. (2021). A new prospective towards out-of-plane verifications of URM infill, 14th Canadian Masonry Symposium, Montreal, Canada, 16-19 May 2021.
83. Morandi, P. (2021). Seismic assessment of brick URM buildings: latest findings and future perspectives, Proc. of the 1st Croatian Conference on Earthquake Engineering, March 22-24 2021, Zagreb, Croatia.
84. Mucedero G, Perrone D, Brunesi E, Monteiro R (2021). Impact of masonry infill variability on the estimation of floor response spectra in RC buildings. In: Proceedings of the 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Greece, online.
85. Nardin, C., Oreste S. Bursi, Fabrizio Paolacci, Gianluca Quinci, Igor Lanese, Alberto Pavese “Shake Table Testing for a Multi-Component Prototype Industrial Plant: Input and System Modelling Issues” ASME 2021 Pressure Vessels & Piping Conference July 13 – 15, 2021 Virtual, Online   https://doi.org/10.1115/PVP2021-61702
86. Ozsarac V, Brunesi E, Nascimbene R (2021). Seismic performance of floating roof steel storage tanks with consideration of energy dissipation system. In: Proceedings of the 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan.
87. Pavese A., Furinghetti M. (2021). Experimental comparison between flat and curved sliding conditions for the response evaluation of curved surface slider devices, COMPDYN 2021 – 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering.
88. Perrone D, Filiatrault A, Peloso S, Brunesi E, Nascimbene R, Beiter C, Piccinin R (2021). Seismic performance of suspended piping restraint installations. In: Proceedings of the 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan.
89. Ravasini S, Belletti B, Brunesi E, Nascimbene R, Parisi F (2021). Robustness-oriented Conceptual Design of Precast Concrete Frame Structures. In: Proceedings of the International fib Symposium on Conceptual Design of Structures 2021. Switzerland, online.
90. Rossi, A., Morandi, P., Milanesi, R.R., Magenes, G., (2021). Influence of the infills typology in the evaluation of the annual losses of RC structures through the application of a new method, Proc. COMPDYN 2021, streamed by Athens, Greece, 27-30 June 2021.
91. Sarkis A, Sullivan T, Brunesi E, Nascimbene R (2021). Numerical simulation of the seismic behavior of precast pre-stressed hollow-core floor seating connections. In: Proceedings of the 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan.
92. Silvestri S.; J. Distl; M. Furinghetti; I. Lanese; S. Mansour; M. Marra; E. Montes; C. Neri; M. Palermo; A. Pavese; E. Rizzo Parisi; A. J. Sadowski; F. Selva; T. Taniguchi; L. Vadrucci; F. Weber Preliminary results of shaking-table tests on a fullscale flat-bottom manufactured steel silo filled with wheat. Seismic Design of Industrial Facilities SEDIF CONFERENCE, March, 1-2 2021.
93. Tiganescu, A., Balan, S., Toma-Danila, D., Ionescu, C., Borzi, B., Bozzoni, F., Curone, D., Di Meo, A., Galiana-Merino J.J., Faravelli, M., Kharazian, A., Molina Palacios, S., Negulescu, C., Ozcebe, A.G., Ozer, E., Tubaldi E. (2021). The TURNkey multi-sensor network for rapid-response actions in Bucharest: monitoring setup and preliminary results. ESC2021 Virtual 37th General Assembly of the European Seismological Commission, 19-24 September 2021.
94. Zuccolo, E., Cremen, G., Galasso, C. (2021). Comparing the performance of regional earthquake early warning algorithms in Europe. ESC2021 Virtual 37th General Assembly of the European Seismological Commission, 19-24 September 2021.

 

Altro

95. Bosio M., Di Salvatore C., Bellotti D., Capacci L., Belleri A., Piccolo V., Cavalieri F., Dal Lago B., Riva P., Magliulo G., Nascimbene R., Biondini F. (2021). Critical evaluation of modeling assumptions on seismic response analysis of italian existing precast structures.
96. Calvi, GM., Moratti, M., Scattarreggia, N., Özsaraç, V., Calvi, PM., Pinho, R. (2021). Developments in International Bridge Engineering, 3-18,
97. Crowley, H. (2021). European Exposure and Vulnerability Models: State-of-The-Practice, In book: Advances in Assessment and Modeling of Earthquake Loss, Springer, Ed: Sinan Akkar, Alper Ilki, Caglar Giksu, Mustafa Erdik., pp. 155-168.
98. Iervolino I., Baraschino R., Spillatura A. and Pacifico A. (2021). Evolution of seismic reliability of code-conforming Italian buildings.
99. Lagomarsino S., Cattari S., Angiolilli M., Bracchi S., Rota M., Penna A. (2021). Modelling and seismic response analysis of existing URM structures. Part 2: historical buildings.
100. Penna A., Rota M., Bracchi S., Angiolilli M., Cattari S., Lagomarsino S. (2021). Modelling and seismic response analysis of existing URM structures. Part 1: modern buildings.

Articoli su rivista internazionale

1. Rota M., Bracchi S., Iorio D., Penna A. (2020). Seismic vulnerability assessment of old Italian railway stations, Structure and Infrastructure Engineering, DOI: 10.1080/15732479.2020.1822884
2. Rosti A., Rota M., Penna A. (2020). Influence of seismic input characterisation on empirical damage probability matrices for the 2009 L’Aquila event, Soil Dynamics and Earthquake Engineering, Vol. 128, No. 1, pp. DOI: doi.org/10.1016/j.soildyn.2019.105870
3. Rosti A., Rota M., Penna A. (2020). Empirical fragility curves for Italian URM buildings, Bulletin of Earthquake Engineering, DOI: 10.1007/s10518-020-00845-9
4. Rosti A., Del Gaudio C., Rota M., Ricci P., Di Ludovico M., Penna A., Verderame G.M. (2020). Empirical fragility curves for Italian residential RC buildings, Bulletin of Earthquake Engineering, DOI: 10.1007/s10518-020-00971-4
5. Brunesi E., Peloso S., Pinho R., Nascimbene R. (2020). Friction characterization testing of fabric felt material used in precast structures. Structural Concrete, vol. 21, p. 735-746, DOI: 10.1002/suco.201900069
6. Merino RJ, Brunesi E, Nascimbene R (2020). Probabilistic evaluation of earthquake-induced sloshing wave height in above-ground liquid storage tanks. Engineering Structures, vol. 202, 109870, DOI: 10.1016/j.engstruct.2019.109870
7. Perrone D, Brunesi E, Filiatrault A, Peloso S, Nascimbene R, Beiter C, Piccinin R (2020). Seismic numerical modelling of suspended piping trapeze restraint installations based on component testing. Bulletin of Earthquake Engineering, vol. 18, p. 3247-3283, DOI: 10.1007/s10518-020-00832-0
8. Perrone D., Filiatrault A., Peloso S., Brunesi E., Beiter C., Piccinin R. (2020). Experimental seismic response evaluation of suspended piping restraint installations. Bulletin of Earthquake Engineering, vol. 18, p. 1499-1524, DOI: 10.1007/s10518-019-00755-5
9. Brunesi E., Nascimbene R., Peloso S. (2020). Evaluation of the Seismic Response of Precast Wall Connections: Experimental Observations and Numerical Modeling. Journal of Earthquake Engineering, vol. 24, p. 1057-1082, DOI: 10.1080/13632469.2018.1469440
10. Malomo, D., Pinho, R., Penna, A. (2020). Applied Element Modelling of the Dynamic Response of a Full-Scale Clay Brick Masonry Building Specimen with Flexible Diaphragms. International Journal of Architectural Heritage, 14 (10), pp. 1484-1501.
11. Vanin, F., Penna, A., Beyer, K. (2020). A three-dimensional macroelement for modelling the in-plane and out-of-plane response of masonry walls.Earthquake Engineering and Structural Dynamics, 49 (14), pp. 1365-1387.
12. Malomo, D., Pinho, R., Penna, A. (2020). Simulating the shake table response of unreinforced masonry cavity wall structures tested to collapse or near-collapse conditions. Earthquake Spectra, 36 (2), pp. 554-578.
13. Vanin, F., Penna, A., Beyer, K. (2020). Equivalent-Frame Modeling of Two Shaking Table Tests of Masonry Buildings Accounting for Their Out-Of-Plane Response. Frontiers in Built Environment, 6, art. no. 42.
14. Malomo, D., Pinho, R., Penna, A. (2020). Numerical modelling of the out-of-plane response of full-scale brick masonry prototypes subjected to incremental dynamic shake-table tests. Engineering Structures, 209, art. no. 110298.
15. Malomo, D., Morandini, C., Crowley, H., Pinho, R., Penna, A. (2020). Impact of ground floor openings percentage on the dynamic response of typical Dutch URM cavity wall structures (2020). Bulletin of Earthquake Engineering.
16. Donà M., Morandi P., Minotto M., Manzini C.F., da Porto F., Magenes G. (2020). Second-order effects in URM walls subjected to compression and out-of-plane bending: from numerical evaluation to proposal of design procedures, Engineering Structures, Volume 209, 15 April 2020. https://doi.org/10.1016/j.engstruct.2019.110130
17. Milanesi R.R., Morandi P., Manzini C.F., Albanesi L., Magenes G. (2020). Out-of-plane response of an Innovative Masonry Infill with Sliding Joints from shaking table tests, Journal of Earthquake Engineering, https://doi.org/10.1080/13632469.2020.1739173
18. Milanesi R.R., Hemmat M, Morandi P., Totoev Y., Rossi A., Magenes G. (2020). Modelling strategies of ductile masonry infills for the reduction of the seismic vulnerability of r.c. frames, Frontiers in Civil Engineering, (in press).
19. Perrone, D., Filiatrault, A., Peloso, Brunesi, E., S., Beiter, C., Piccinin, R. (2020). Experimental seismic response evaluation of suspended piping restraint installations, Bulletin of Earthquake Engineering, 2020, 18(4), pp. 1499-1524.
20. Furinghetti M., Pavese A. (2020). Definition of a Simplified Design Procedure of Seismic Isolation Systems for Bridges, Structural Engineering International, DOI: 10.1080/10168664.2020.1775535
21. Furinghetti M., Lanese I., Pavese A. (2020). Experimental assessment of the seismic response of a base isolated building through hybrid simulation technique, Frontiers in Built Environment, DOI: 10.3389/fbuil.2020.00033
22. Borzi B., Faravelli M., Di Meo A. (2020). Application of the SP-BELA methodology to RC residential buildings in Italy to produce seismic risk maps for the National Risk Assessment. Bull Earthquake Eng, https://doi.org/10.1007/s10518-020-00953-6
23. Borzi B., Onida M., Faravelli M., Polli D., Pagano M., Quaroni D., Cantoni A., Speranza E., Moroni C. (2020). IRMA platform for the calculation of damages and risks of Italian residential buildings. Bull Earthquake Eng, https://doi.org/10.1007/s10518-020-00924-x
24. Da Porto F., Donà M., Rosti A., Rota M., Lagomarsino S., Cattari S., Borzi B., Onida M., De Gregorio D., Linda Perelli F., Del Gaudio C., Ricci P., Speranza E. (2020). Comparative analysis of the fragility curves for Italian residential masonry and RC buildings. Bull Earthquake Eng (accepted for publication?).
25. Dolce M., Prota A., Borzi B., Da Porto F., Lagomarsino S., Magenes G., Moroni C., Penna A., Polese M., Speranza E., Verderame G., Zuccaro G. (2020). Seismic Risk Assessment of residential buildings in Italy. Bull Earthquake Eng (accepted for publication).
26. Paolucci R., Mazzieri I., Piunno G., Smerzini C., Vanini M., Özcebe A.G. (2020). Earthquake ground motıon modellling of induced seismicity in the Gröningen gas field. Earthquake Engineering & Structural Dynamics, DOI: https://doi.org/10.1002/eqe.3367
27. Özcebe A.G., Giretti D., Bozzoni F., Fioravante V., Lai C.G. (2020). Centrifuge and numerical modelling of earthquake-induced soil liquefaction under free-field conditions and by considering soil-structure interaction. Bull Earthquake Eng, DOI: https://doi.org/10.1007/s10518-020-00972-3
28. Infantino M., Mazzieri I., Özcebe A.G., Paolucci R., Stupazzini M. (2020). 3D Physics-Based Numerical Simulations of Ground Motion in Istanbul from Earthquakes along the Marmara Segment of the North Anatolian Fault. Bulletin of the Seismological Society of America (XX): 1-18, DOI: 10.1785/0120190235
29. Silva V., Amo-Oduro D., Calderon A., Costa C., Dabbeek J., Despotaki V., Martins L., Pagani M., Rao A., Simionato Mi., Viganò D., Yepes-Strada C., Acevedo A., Crowley H., Horspool N., Jaiswal K., Journeay M., Pittore M. (2020). Development of a global seismic risk model. Earthquake Spectra, https://journals.sagepub.com/doi/10.1177/8755293019899953
30. Crowley H., Despotaki V., Rodrigues D., Silva V., Toma-Danila D., Riga E., Karatzetsou A., Sousa L., Ozcebe S., Zugic Z. and Gamba P. (2020). Exposure model for European Seismic Risk Assessment. Earthquake Spectra, DOI: 10.1177/8755293020919429
31. Bozzoni F., Bonì R., Conca D., Lai C.G., Zuccolo E., Meisina C. (2020). Megazonation of earthquake-induced soil liquefaction hazard in continental Europe. Bull Earthquake Eng. https://doi.org/10.1007/s10518-020-01008-6
32. Bozzoni F., Ozcebe A.G., Balia A., Lai C.G., Borzi B., Nascimbene R., Khairy D., Gabbianelli G., Ippoliti L., Berardi S., Trombetti M., Moroni C. (2020). Seismic ground response analyses at an international airport in northern italy by using a stochastic-based approach. Journal of Theoretical and Applied Mechanics. 58, 2, 499-511. DOI: 10.15632/jtam-pl/119017
33. Conca D., Bozzoni F., Lai C.G. (2020). Interdependencies in seismic risk assessment of seaport systems: case study at a large commercial port in Italy. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, Vol. 6, 2, https://ascelibrary.org/doi/10.1061/AJRUA6.0001043
34. Lai C.G., Bozzoni F., Conca D., Famà A., Özcebe A.G., Zuccolo E., Meisina C., Bonì R., Bordoni M., Cosentini R.M., Martelli L., Poggi V., Viana da Fonseca A., Ferreira C., Rios S., Cordeiro D., Ramos C., Molina-Gómez F., Coelho C., Logar J., Maček M., Oblak A., Ozcep F., Bozbey I., Oztoprak S., Sargin S., Aysal N., Oser C., Kelesoglu M.K. (2020). Technical guidelines for the assessment of earthquake induced liquefaction hazard at urban scale. Bulletin of Earthquake Engineering (2020). https://doi.org/10.1007/s10518-020-00951-8
35. Lai C.G., Poggi V., Famà A., Zuccolo E., Bozzoni F., Meisina C., Bonì R., Martelli L., Massa M., Mascandola C., Petronio L., Affatato A., Baradello L., Castaldini D., Cosentini R.M. (2020). An inter-disciplinary and multi-scale approach to assess the spatial variability of ground motion for seismic microzonation: the case study of Cavezzo municipality in Northern Italy. Engineering Geology, 274, 5. https://doi.org/10.1016/j.enggeo.2020.105722
36. Zuccolo E., Bozzoni F., Crempien J., Lai C.G. (2020). Nonlinear broadband simulation of the Mw 6.0 May 29, 2012 Emilia earthquake in Northern Italy. Soil Dynamics and Earthquake Engineering, Vol. 129, https://doi.org/10.1016/j.soildyn.2019.105931
37. Chapizanis, D., Karakitsios, S., Gotti, A., Sarigiannis, D. (2020). Assessing personal exposure using Agent Based Modelling informed by sensors technology. Environmental Research, 192, 110141.
38. Sarigiannis, D., Handakas, E.J., Karakitsios, S, Gotti (2020). A. Life cycle assessment of municipal waste management options. Environmental Research, 110307.
39. Sarigiannis, D.Α., Karakitsios, S.P., Handakas, E., Gotti, A. (2020). Development of a generic lifelong physiologically based biokinetic model for exposome studies. Environmental Research (2020). 185, doi.org/10.1016/j.envres.2020.109307
40. Izquierdo, R., García Dos Santos, S., Borge, R., Paz, D.D.L., Sarigiannis, D., Gotti, A., Boldo, E. (2020). Health impact assessment by the implementation of Madrid City air-quality plan in 2020. Environmental Research. 183, doi.org/10.1016/j.envres.2019.109021
41. Sarigiannis, D., Chapizanis, D., Petridis, I., Kougioumtzoglou, A., Kermenidou, M., Sarigiannis, G., Gotti, A., Karakitsios, S. (2020). Refining PM exposure using low-cost portable 2 sensor data and human respiratory tract 3 deposition modelling. Journal of Exposure Science and Environmental Epidemiology,
42. O’Reilly, G.J., R. Monteiro, A.M.B. Nafeh, T.J. Sullivan and G.M. Calvi (2020). Displacement-based framework for simplified seismic loss assessment. Journal of earthquake engineering, 24, 1-22.
43. Malomo, D., N. Scattarreggia, A. Orgnoni, R. Pinho, M. Moratti and G.M. Calvi (2020). Numerical Study on the Collapse of the Morandi Bridge, Journal of Performance of Constructed Facilities, Volume 34 Issue 4.
44. O’Reilly, G.J. and G.M. Calvi (2020). Quantifying seismic risk in structures via simplified demand-intensity models, Bulletin of Earthquake Engineering volume 18, pages 2003-2022.
45. Andreotti, G. and G.M. Calvi (2020). Design of laterally loaded pile‐columns considering SSI effects: Strengths and weaknesses of 3D, 2D, and 1D nonlinear analysis, Earthquake Engineering Structural Dynamics, https://doi.org/10.1002/eqe.3379
46. Andreotti, G.; Calvi, G.M.; Soga, K.; Gong, C.; Ding, W. (2020). Cyclic model with damage assessment of longitudinal joints in segmental tunnel linings, Tunnelling and Underground Space Technology, Volume 103, September 2020.

 

Articoli su rivista nazionale

47. Rosti A., Del Gaudio C., Di Ludovico M., Magenes G., Penna A., Polese M., Prota A., Ricci P., Rota M., Verderame G.M. (2020). Empirical vulnerability curves for Italian residential buildings, Bollettino di Geofisica Teorica e Applicata, Vol. 61, No. 3, pp. 357-374. DOI: 10.4430/bgta0311.
48. Morandi, P., Milanesi R.R., Magenes, G., (2020). Criteri di progettazione sismica delle tamponature in muratura di laterizio: indicazioni nelle NTC2018, Costruire in laterizio, vol. 183, p. 60-68, ISSN: 0394-1599.
49. Dolce M., Sicoli R., Speranza E., Ciervo M., Conte C., Garro G., Griner F., Borzi B., Bocchi F., Cantoni A., Di Meo A., Faravelli M., Onida M., Pagano M., Dolce A., Raiola C., Savadori L., Sillari G. (2020). Nasce SICURO+, il portale del rischio sismico della Protezione Civile. Che cosa è e come funziona. In: Ingenio, informazione e tecnica progettuale, https://www.ingenio-web.it/25834-nasce-sicuro-il-portale-del-rischio-sismico-della-protezione-civile-che-cosa-e-e-come-funziona
50. Peloso S., Chichino B., Fagà G., Bolognini D. (2020). Progettazione sismica degli elementi non strutturali: spettri di accelerazione al piano, Progettazione Sismica, v.12, n.5. DOI 10.7414/PS.12.1.5 – https://doi.org/10.7414/PS.12.1.5

 

Articoli conferenze internazionali

51. Bracchi S., Mandirola M., Rota M., Penna A. (2020). A new macroelement-based strategy for modelling reinforced masonry piers, Proceedings 17th International Brick and Block Masonry Conference, IB2MaC, July 5-8, Krakow, Poland.
52. Guerrini G., Tomassetti U., Graziotti F., Rota M., Penna A. (2020). Effect of an innovative isolation system on the seismic response of cultural heritage building contents, Proceedings 17th World Conference on Earthquake Engineering, September 13-18, Sendai, Japan.
53. Guerrini G., Senaldi I., Tacci M., Penna A., Beyer K., Rota M. (2020). Damage limit states for artistic assets from cyclic and dynamic tests on plastered masonry walls, Proceedings 17th World Conference on Earthquake Engineering, Sendai, Japan.
54. Rosti A., Rota M., Penna A. (2020). Derivation of fragility curves for Italian masonry buildings from post-earthquake damage data, Proceedings 17th World Conference on Earthquake Engineering, Sendai, Japan.
55. Magenes G., Rosti A., Del Gaudio C., Di Ludovico M., Penna A., Polese M., Prota A., Ricci P., Rota M., Verderame G.M. (2020). Derivation of fragility curves for Italian RC buildings from post-earthquake damage data, Proceedings 17th World Conference on Earthquake Engineering, Sendai, Japan.
56. Del Gaudio C., Rosti A., Di Ludovico M., Magenes G., Penna A., Polese M., Prota A., Ricci P., Rota M., Verderame G.M. (2020). Use of empirical fragility curves for assessing seismic risk in Italy, Proceedings 17th World Conference on Earthquake Engineering, Sendai, Japan.
57. Penna A., Mandirola M., Bracchi S., Rota M. (2020). Seismic analysis of reinforced masonry buildings using a novel modelling strategy, Proceedings 17th World Conference on Earthquake Engineering, Sendai, Japan.
58. Ozsarac V., Brunesi E., Nascimbene R. (2020). Seismic performance of floating roof steel storage tanks with consideration of energy dissipation system. In: Proceedings of the 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan – September 13th to 18th 2020.
59. Perrone D., Filiatrault A., Peloso S., Brunesi E., Nascimbene R., Beiter C., Piccinin R. (2020). Seismic performance of suspended piping restraint installations. In: Proceedings of the 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan – September 13th to 18th 2020.
60. Brunesi E., Pavese A., Nascimbene R. (2020). Seismic Performance of Above-Ground Liquid Storage Tanks. In: Proceedings of the 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan – September 13th to 18th 2020.
61. Donà, M., Morandi, P., Manzini, C., Minotto, M., da Porto F., Magenes, G. (2020). Second-order effects in URM walls subjected to combined vertical and lateral loading, Proc. of XVII International Brick and Block Masonry Conference, 5-8 July 2020, Krakow, Poland.
62. Magenes G., Rossi A., Milanesi R.R., Morandi P. (2020). Economic and technical advantages in the seismic response of rc buildings with innovative infills with sliding joints, 17th World Conference on Earthquake Engineering, Sendai, Giappone, 27/9/21-2/10/21.
63. Milanesi R.R., Morandi P., Hak S., Magenes G. (2020). The interaction between in-plane and out-of-plane seismic response of modern strong masonry infills, 17IBMAC, Cracovia, Polonia, 5-8 Luglio 2020.
64. Milanesi R.R., Morandi P., Magenes G. (2020). An innovative seismic resistant masonry infill system with sliding joints, Sponse Newsletter n.5, Settembre 2020.
65. Peloso, S., Perrone, D., Bolognini, D., Merino Vela R.J. (2020). Seismic risk of non-structural elements: IT tool for raising awareness and mitigate consequences, Proceedings 17th World Conference on Earthquake Engineering.
66. Furinghetti M., Yang T., Calvi P.M., Pavese A. (2020). Dynamic response of curved surface slider devices under severe input motion, 17WCEE – 17th World Conference on Earthquake Engineering, Sendai, Japan – September 13th to 18th 2020.
67. Furinghetti M., Pavese A. (2020). Influence of cyclic effect and extra-design displacement demands on Curved Surface Slider devices, IALCCE 2020 – The Seventh International Symposium on Life-Cycle Civil Engineering, October 27-30 2020.
68. Silvestri S., Distl J., Furinghetti M., Lanese I., Mansour S., Marra M., Montes E., Neri C., Palermo M., Pavese A., Rizzo Parisi E., Sadowski A.J., Selva F.,Taniguchi T., Vadrucci L., Weber F. (2020). Shaking-table tests of a full-scale flat-bottom manufactured steel silo filled with wheat, 17WCEE – 17th World Conference on Earthquake Engineering, Sendai, Japan – September 13th to 18th 2020.
69. Silvestri S., Distl J., Furinghetti M., Lanese I., Mansour S., Marra M., Montes E., Neri C., Palermo M., Pavese A., Rizzo Parisi E., Sadowski A.J., Selva F.,Taniguchi T., Vadrucci L., Weber F. (2020). Preliminary results of shaking-table tests on a fullscale flat-bottom manufactured steel silo filled with wheat, 2nd International Conference on Seismic Design of Industrial Facilities, Aachen, 04.-05.03.2020.
70. Nardin, C., Lanese, I., Di Filippo, R., Endrizzi, R., Bursi, O.S., Paolacci, F. (2020). Ground Motion Model for Seismic Vulnerability Assessment of Prototype Industrial Plants, ASME – Pressure Vessels and Piping Conference (PVP2020). Paper No: PVP2020-21190, V009T09A017; 9 pages, https://doi.org/10.1115/PVP2020-21190, Published Online: October 28, 2020.
71. Stamatelopoulou, A., Pardali, D., Saraga, D., Maggos, T., Karakitsios, S., Gotti, A., Sarigiannis, D. (2020). Real time personal exposure assessment using low-cost sensors. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
72. Persico, M.G., Gotti, A., Visave, J., Bugnoni, F., Chapizanis, D., Petridis, I., Sarigiannis, G., Ponte, E., Sarigiannis, D. (2020). Personal exposure to air pollution: the Milan sensor campaign in ICARUS project. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
73. Kapanidis, I., Tsiros, E., Karteris, M., Bagiatis, V., Sarigiannis, D., Gotti, A. (2020). A Decision Support System (DSS) for integrated climate forcing and air pollution reduction and in European Cities. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
74. Bartzis, J. G., Sakellaris, I. A., Xenofontos, T. A., Balafas, V., Neuhäuser, J., Friedrich, R., Gotti, A., Sarigiannis, D.A. (2020). Development of an integral modeling system to study air quality climatic trends in European urban areas. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
75. Kocman, D., Kanduč, T., Novak, R., Robinson, J.A., Mikeš, O., Degrendele, C., Sanka, O., Vinkler, J., Prokeš, R., Vienneau, D., Flückiger, B., Gotti, A., Visave, J., Bugnoni, F., Persico, M. G., Dos Santos, S. G., Nuñez-Corcuera, B., Maggos, T., Stamatelopoulou, A., Pardali, D., Saraga, D., Chapizanis, D., Petridis, I., Karakitsios, S., Boldo, E., Izquierdo, R., Sarigiannis, G., Sarigiannis, D.A. (2020). Multi-sensor data collection for personal exposure monitoring: ICARUS experience. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
76. Persico, M.G., Gotti, A., Bugnoni, F., Visave, J., Karakitsios, S., Sakellaris, I., Bartzis, J., Neuhaeuser, J., Friedrich, R., Maccagnan, A., Taylor, T., Sarigiannis, D. (2020). Air pollution health impact assessment and cost-benefit analysis of win-win policy solutions at the urban scale in the city of Milan. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
77. Saraga, D., Maggos, T., Bairachtari, K., Dasopoulou, M., Degrendele, C., Klanova, J., Kocman, D., Kanduč, T., Garcia, S., Mateos, M.C., Gotti, A., Sarigiannis, D. (2020). Fine particulate matter chemical composition and sources in 6 European cities: The ICARUS Project. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
78. Nuñez Corcuera, B., Boldo, E., Izquierdo, R., Peteira, R.F., Dos Santos, S.G., Gómez, P.M., Gotti, A., Sarigiannis, D., Soria Lara, J.A. (2020). Future trends on green and healthy cities. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
79. Taylor, T., Maccagnan, A., Sarigiannis, D., Gotti, A., Bugnoni, F., Persico, M., Visave, J., Neuhäuser, J., Friedrich, R., Vienneau, D., Flückiger, B., Harnych, J., Mitrovikj, K. M., Spitz, J., Mikeš, O., Degrendele, C., Gkika, A., Bartzis, J., Sakellaris, I., Kontić, D. (2020). Cost-benefit analysis of carbon mitigation measures in European cities: the importance of co-benefits. Proceeding of 20th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region (MESAEP 2020), ISBN 9781005202804.
80. Ahmetovic D, Bettini D, Ciucci M, Dacarro F, Dubini P, Gotti A, O’Reilly G, Marino A, Mascetti S, Sarigiannis D. (2020). Emergency navigation assistance for industrial plants workers subject to situational impairment. Proceeding of ASSETS ’20: The 22nd International ACM SIGACCESS Conference on Computers and Accessibility October 2020 Article No.: 66 Pages 1-3 https://doi.org/10.1145/3373625.3418016
81. Crowley H., Silva V., Kalakonas P., Martins L., Weatherill G., Pitilakis K., Riga E., Borzi B., Faravelli M. (2020). Verification of the European Seismic Risk Model (ESRM20). Proceedings of 17th World Conference on Earthquake Engineering, Sendai, Japan.
82. Silva V., Calderon A., Costa C., Dabbeek J., Martins L., Rao A., Yepes-Estrada C., Acevedo A., Crowley H., Jaiswal K., Journeay M., Pittore M. (2020). Exploring probabilistic seismic risk assessment to monitor the Sendai Framework for Disaster Risk. Proceedings of 17th World Conference on Earthquake Engineering, Sendai, Japan.
83. Yepes-Estrada C., Silva V., Rao A., Amo-Oduro D., Calderon A., Costa C., Dabbeek J., Despotaki V., Martins L., Acevedo A., Crowley H., Journeay M. (2020). Development of a Global Exposure Model for Regional Seismic Risk Assessment. Proceedings of 17th World Conference on Earthquake Engineering, Sendai, Japan.
84. Dacarro F., Peloso S., Bolognini D., Calvi G.M. (2020). Trial of a Mobile System for in-Situ Dynamic Tests on Full Scale Structures, 17° WCEE, Sendai, Japan.

 

Altro

85. Pipino, P., Dubini, P., Peloso, S., Dacarro, F. (2020). Comportamento sismico degli ascensori Seismic Behavior of the Elevators., Mobilità verticale per l’accessibilità. Oltre il Quadrato e la X. Anteferma Edizioni.
86. Abbiati, G., Lanese, I., Eftekhar Azam, S., Bursi, O.S., Pavese, A. A framework for hybrid simulation with online model updating suitable for hard real-time computing Structural control and Health monitoring, 2020.
87. Antoncecchi I., Ciccone F., Dialuce G., Grandi S., Terlizzese F., Di Bucci D., Dolce M., Argnani A., Mercorella A., Pellegrini C., Rovere M., Armigliato A., Pagnoni, G., Paparo M.A., Tinti, S., Zaniboni F., Basili R., Cavallaro D., Coltelli M., Firetto Carlino M., Lipparini L., Lorito S., Maesano F.E., Romano F., Scarfì L., Tiberti M.M., Volpe M., Fedorik J., Toscani G., Borzi B., Faravelli M., Bozzoni F., Pascale V., Quaroni D., Germagnoli F., Belliazzi S., Del Zoppo M., Di Ludovico M., Lignola G.P., Prota A. (2020). Progetto SPOT – Sismicità Potenzialmente innescabile Offshore e Tsunami. Report integrato di fine progetto, DOI: 10.5281/zenodo.3732887, ISBN 9788894366945.
88. Sarigiannis, D.A., Gotti, A., Karakitsios, S.P. (2020). The waste-energy-health nexus: the social (in) justice dimension. Chapter in: Environmental exposures and human health challenges. Paradopoulou, P., Marouli, C., Misseyanni, A. (eds.), IGI Global (2019).
89. Crowley H. (2020). European Exposure and Vulnerability Models: State-of-the-Practice, Challenges and Future Directions. In: Advances in Assessment and Modeling of Earthquake Loss, Editors: Sinan Akkar, Mustafa Erdik, Alper Ilki, Caglar Goksu.

Articoli su rivista internazionale

1. Merino, R.J., Brunesi, E., Nascimbene, R., Probabilistic evaluation of earthquake-induced sloshing wave height in above-ground liquid storage tanks, 2020, Engineering Structures, 202,109870.
2. Perrone, D., Brunesi, E., Filiatrault, A., Nascimbene, R., Probabilistic estimation of floor response spectra in masonry infilled reinforced concrete building portfolio, 2020, Engineering Structures, 202,109842.
3. Perrone, D., Calvi, P.M., Nascimbene, R., Fischer, E.C., Magliulo, G., Seismic performance of non-structural elements during the 2016 Central Italy earthquake, 2019, Bulletin of Earthquake Engineering, 17(10), pp. 5655-5677.
4. Brunesi, E., Peloso, S., Pinho, R., Nascimbene, R., Cyclic tensile testing of a three-way panel connection for precast wall-slab-wall structures, 2019 Structural Concrete, 20(4), pp. 1307-1315.
5. Merino Vela, R.J., Brunesi, E., Nascimbene, R., Seismic assessment of an industrial frame-tank system: development of fragility functions, 2019, Bulletin of Earthquake Engineering, 17(5), pp. 2569-2602.
6. Rajapakse, R.M.C.M., Wijesundara, K.K., Nascimbene, R., Bandara, C.S., Dissanayake, R., Accounting axial-moment-shear interaction for force-based fiber modeling of RC frames, 2019, Engineering Structures, 184, pp. 15-36.
7. Vela, R.J.M., Brunesi, E., Nascimbene, R., Floor spectra estimates for an industrial special concentrically braced frame structure, 2019, Journal of Pressure Vessel Technology, Transactions of the ASME 141(1),010909.
8. Eren, N., Brunesi, E., Nascimbene, R., Influence of masonry infills on the progressive collapse resistance of reinforced concrete framed buildings, 2019, Engineering Structures, 178, pp. 375-394.
9. Brunesi, E., Peloso, S., Pinho, R., Nascimbene, R., Shake-table testing of a full-scale two-story precast wall-slab-wall structure, 2019, Earthquake Spectra, 35(4), pp. 1583-1609.
10. Morandi P, Manzini, C., Magenes, G, Application of seismic design procedures on three modern URM buildings struck by the 2012 Emilia earthquakes: inconsistencies and improvement proposals in the European codes, Bulletin of Earthquake Engineering, 2019.
11. Morandi, P., Albanesi, L., Magenes, G., 2019, In-plane cyclic response of new urm systems with thin web and shell clay units, Journal of Earthquake Engineering, DOI: 10.1080/13632469.2019.1586801
12. Morandi P., Manzini C.F., Magenes G. (2019). Application of seismic design procedures on three modern URM buildings struck by the 2012 Emilia earthquakes: inconsistencies and improvement proposals in the European codes, Bulletin of Earthquake Engineering (2019), https://doi.org/10.1007/s10518-019-00650-z
13. Guerrini, G., Damiani, N., Miglietta M., Graziotti, F. (2020). Cyclic response of masonry piers retrofitted with timber frames and boards. Structures and Buildings. Accepted.
14. Rosti, A., Rota, M., Penna, A. (2020). Influence of seismic input characterisation on empirical damage probability matrices for the 2009 L’Aquila event. Soil Dynamics and Earthquake Engineering, 128, 105870.
15. Kallioras, S., Correia, A. A., Graziotti, F., Penna, A., & Magenes, G. (2019). Collapse shake-table testing of a clay-URM building with chimneys. Bulletin of Earthquake Engineering, 1-40.
16. Guerrini, G., Senaldi, I., Graziotti, F., Magenes, G., Beyer, K., & Penna, A. (2019). Shake-table test of a strengthened stone masonry building aggregate with flexible diaphragms. International Journal of Architectural Heritage, 13(7), 1078-1097.
17. Di Sarno, L., Da Porto, F., Guerrini, G., Calvi, P., Camata, G., & Prota, A. (2019). Seismic performance of bridges during the 2016 Central Italy earthquakes. Bulletin of Earthquake Engineering, 17(10): 5729-5761. https://doi.org/10.1007/s10518-018-0419-4
18. Di Ludovico, M., Digrisolo, A., Moroni, C., Graziotti, F., Manfredi, V., Prota, A., Dolce, M. & Manfredi, G. (2019). Remarks on damage and response of school buildings after the Central Italy earthquake sequence. Bulletin of Earthquake Engineering, 17(10), 5679-5700.
19. Sorrentino, L., Cattari, S., da Porto, F., Magenes, G., & Penna, A. (2019). Seismic behaviour of ordinary masonry buildings during the 2016 central Italy earthquakes. Bulletin of Earthquake Engineering, 17(10), 5583-5607.
20. Masi, A., & Penna, A. (2019). Guest editorial: the 2016 central Italy earthquakes. Bulletin of Earthquake Engineering, 17(10), 5393-5397.
21. Morandi, P., Albanesi, L., & Magenes, G. (2019). In-Plane Cyclic Response of New URM Systems with Thin Web and Shell Clay Units. Journal of Earthquake Engineering, 1-32.
22. Tomassetti, U., Grottoli, L., Sharma, S., & Graziotti, F. (2019). Dataset from dynamic shake-table testing of five full-scale single leaf and cavity URM walls subjected to out-of-plane two-way bending. Data in brief, 24, 103854.
23. Tomassetti, U., Graziotti, F., Sorrentino, L., & Penna, A. (2019). Modelling rocking response via equivalent viscous damping. Earthquake Engineering & Structural Dynamics, 48(11), 1277-1296.
24. Andreotti, G., Graziotti, F., & Magenes, G. (2019). Expansion of mortar joints in direct shear tests of masonry samples: implications on shear strength and experimental characterization of dilatancy. Materials and Structures, 52(4), 64.
25. Graziotti, F., Penna, A., & Magenes, G. (2019). A comprehensive in situ and laboratory testing programme supporting seismic risk analysis of URM buildings subjected to induced earthquakes. Bulletin of Earthquake Engineering, 17(8), 4575-4599.
26. Malomo, D., Pinho, R., & Penna, A. (2019). Applied Element Modelling of the Dynamic Response of a Full-Scale Clay Brick Masonry Building Specimen with Flexible Diaphragms. International Journal of Architectural Heritage.
27. Malomo, D., DeJong, M.J., Penna, A (2019). Distinct element modelling of the in‐plane cyclic response of URM walls subjected to shear‐ Earthquake Engineering & Structural Dynamics.
28. Penna, A., Calderini, C., Sorrentino, L., Carocci, C. F., Cescatti, E., Sisti, R., Modena, C. & Prota A. (2019). Damage to churches in the 2016 central Italy earthquakes. Bulletin of Earthquake Engineering, 1-28.
29. Morandi, P., Manzini, C.F., Magenes, G. (2019). Application of seismic design procedures on three modern URM buildings struck by the 2012 Emilia earthquakes: inconsistencies and improvement proposals in the European codes. Bulletin of Earthquake Engineering, 1-34.
30. Kouris, L.A.S., Penna, A., Magenes, G. (2019). Dynamic Modification and Damage Propagation of a Two-Storey Full-Scale Masonry Building. Advances in Civil Engineering, 2019.
31. Penna, A., Galasco, A., Tondelli, M., Rota, M., & Magenes, G. (2019). Seismic Vulnerability of Old Italian Railway Stations. In Structural Analysis of Historical Constructions (pp. 1229-1237). Springer, Cham.
32. Kallioras, S., Graziotti, F., Penna, A. (2019). Numerical assessment of the dynamic response of a URM terraced house exposed to induced seismicity. Bulletin of Earthquake Engineering, 17(3), 1521-1552.
33. Tomassetti, U., Correia, A.A., Candeias, P.X., Graziotti, F., Costa, A.C. (2019). Two-way bending out-of-plane collapse of a full-scale URM building tested on a shake table. Bulletin of Earthquake Engineering, 17(4), 2165-2198.
34. Graziotti, F., Tomassetti, U., Sharma, S., Grottoli, L., Magenes, G. (2019). Experimental response of URM single leaf and cavity walls in out-of-plane two-way bending generated by seismic excitation. Construction and Building Materials, 195, 650-670.
35. Senaldi, I. E., Guerrini, G., Comini, P., Graziotti, F., Penna, A., Beyer, K., Magenes, G. (2019). Experimental seismic performance of a half-scale stone masonry building aggregate. Bulletin of Earthquake Engineering, 1-35.
36. Senaldi, I., Guerrini, G., Caruso, M., Graziotti, F., Magenes, G., Beyer, K., Penna, A. (2019). Experimental Seismic Response of a Half-Scale Stone Masonry Building Aggregate: Effects of Retrofit Strategies. In: Structural Analysis of Historical Constructions (pp. 1372-1381). Springer, Cham.
37. Faravelli M., Borzi B., Polli D., Pagano M. (2019). Calibration of a mechanics-based method for large-scale vulnerability assessment. Bull Earthquake Eng, 17(5), 2485-2508, DOI: 10.1007/s10518-019-00560-0
38. Borzi B., Faravelli M., Polli D. (2019). Central Italy sequence: simulated damage scenario for the main 2016 shocks. Bull Earthquake Eng, 17(10), 5559-5581, DOI: 10.1007/s10518-018-0378-9.
39. Andreotti G., Lai C.G. (2019) Use of fragility curves to assess the seismic vulnerability in the risk analysis of mountain tunnels. Tunnelling and Underground Space Technology, 91(103008), DOI: 10.1016/j.tust.2019.103008
40. Lanzo G., Tommasi P., Ausilio A., Aversa S., Bozzoni F., Cairo R., d’Onofrio A., Durante M.G., Foti S., Giallini S., Mucciacciaro M., Pagliaroli A., Sica S., Silvestri F., Vessia G., Zimmaro P. (2019). Reconnaissance of geotechnical aspects of the 2016 Central Italy earthquakes. Bulletin of Earthquake Engineering, Vol. 17, Issue 10, pp. 5495-5532. https://doi.org/10.1007/s10518-018-0350-8
41. Brunesi E., Faravelli M., Borzi B., Cademartori M., Morassi C., Siano R. (2019) Seismic vulnerability assessment of storage steel tanks in industrial areas: a case-study. Fresenius Environmental Bulletin, 28(2), 930-936, ISSN 1018-4619.
42. Onida M., Faravelli M., Gotti A., Sarigiannis D. (2019). Communicating multi-hazard health risk through a web-gis platform: a case-study. Fresenius Environmental Bulletin, 28(2), 937-943, ISSN 1018-4619.
43. Cademartori M., Morassi C., Siano R., Faravelli M., Brunesi E. (2019). Seismic Risk Analysis of Pressure Vessels. Fresenius Environmental Bulletin, 28(2), 1013-1019, ISSN 1018-4619.
44. Silva V., Akkar S., Baker J., Bazzurro P., Castro J.M., Crowley H., Dolsek M., Galasso C., Lagomarsino S., Monteiro R., Perrone D., Pitilakis K., Vamvatsikos D. (2019). Current Challenges and Future Trends in Analytical Fragility and Vulnerability Modelling. Earthquake Spectra, Vol. 35, No. 4, pp. 1927-1952, https://doi.org/10.1193/042418EQS101O
45. Silva V., Amo-Oduro D., Calderon A., Costa C., Dabbeek J., Despotaki V., Martins L., Pagani M., Rao A., Simionato M., Viganò D., Yepes-Strada C., Acevedo A., Crowley H., Horspool N., Jaiswal K., Journeay M., Pittore M. (2019). Development of a global seismic risk model. Earthquake Spectra, accepted for publication.
46. Crowley H., Despotaki V., Rodrigues D., Silva V., Toma-Danila D., Riga E., Karatzetsou A., Sousa L., Ozcebe S., Zugic Z. and Gamba P. (2019). Exposure model for European Seismic Risk Assessment. Earthquake Spectra, under review.
47. Quaglini V., Dubini P., Furinghetti M., Pavese A. (2019). Assessment of Scale Effects in the Experimental Evaluation of the Coefficient of Friction of Sliding Isolators, Journal of Earthquake Engineering, DOI: 10.1080/13632469.2019.1687054
48. Furinghetti M., Pavese A., Lunghi F., Silvestri D. (2019). Strategies of Structural Health Monitoring for Bridges based on Cloud Computing, Journal of Civil Structural Health Monitoring, DOI: 10.1007/s13349-019-00356-5
49. Brunesi, E., Peloso, S., Pinho, R., Nascimbene, R. (2019). Experimental seismic response evaluation of suspended piping restraint installations, Structural Concrete, Under press.
50. Abbiati, G., Lanese, I., Cazzador, E., Burs,i O.S., Pavese, A. (2109). A Computational Framework for Fast-Time Hybrid Simulation Based on Partitioned Time Integration and State-Space Modeling”. Structural Control and Health Monitoring. STC-18-0027.R1.
51. O’Reilly, G.J., Perrone, D., Fox, M.J., Lanese, I., Monteiro, R., Filiatrault, A., and Pavese, A. (2019). System Identification and Seismic Assessment Modelling Implications for Italian School Buildings. Journal of Performance of Constructed Facilities. doi:10.1061/(ASCE)CF.1943-5509.0001237
52. Argyroudis, S., Fotopoulou, S., Karafagka, S., Pitilakis, K., Selva, J., Salzano, E., Basco, A., Crowley, H., Rodrigues, D., Matos, J.P., Schleiss, A.J., Courage, W., Reinders, J., Cheng, Y., Akkar, S., Uckan, E., Erdik, M., Giardini, D., Mignan, A. (2019). A risk-based multi-level stress test methodology: Application to six critical non-nuclear infrastructure in Europe, Natural Hazards, DOI: 10.1007/s11069-019-03828-5

 

Articoli su rivista nazionale

52. Bolognini D., Dubini P., Dacarro F. (2019). Telaio pluripiano per prove dinamiche sperimentali su tavola vibrante di elementi non strutturali, Progettazione Sismica, V.11, N.1, DOI 10.7414/PS.11.1.85-90 – https://doi.org/10.7414/PS.11.1.85-90
53. Bolognini D., Fort V., Dubini P., Perrone D., Dacarro F., Peloso S. (2018). Prove dinamiche su tavola vibrante di elementi non strutturali, Progettazione Sismica, V.10, N.2, DOI. 10.7414/PS.10.2.49-60 – http://dx.medra.org/10.7414/PS.10.2.49-60 (pubblicato nel 2019).
54. Dolce M., Speranza E., Giordano F., Borzi B., Bocchi F., Conte C., Di Meo A., Faravelli M., Pascale V. (2019). Observed damage database of past Italian earthquakes: the DaD.O. WebGIS. Bollettino di Geofisica Teorica ed Applicata, 60(2), 141-164, DOI 10.4430/bgta0254
55. Brunesi E., Faravelli M., Borzi B., Cademartori M., Morassi C., Siano R. (2019). Seismic vulnerability assessment of storage steel tanks in industrial areas: a case-study. Fresenius Environmental Bulletin, 28(2), 930-936, ISSN 1018-4619.
56. Onida M., Faravelli M., Gotti A., Sarigiannis D. (2019). Communicating multi-hazard health risk through a web-gis platform: a case-study. Fresenius Environmental Bulletin, 28(2), 937-943, ISSN 1018-4619.
57. Cademartori M., Morassi C., Siano R., Faravelli M., Brunesi E. (2019). Seismic Risk Analysis of Pressure Vessels. Fresenius Environmental Bulletin, 28(2), 1013-1019, ISSN 1018-4619.
58. Polli D., Faravelli M., Ceresi A., Bordogna G. (2019) Utilizzo dei dati satellitari nel progetto SIMULATOR-ADS. Progettazione Sismica, 12(2), 7-23, DOI 10.7414/PS.11.2.7-23

 

Articoli conferenze internazionali

59. Morandi P., Manzini C.F., Borzi B., Mauro A., Vecchi A., Tisalvi M., Iacobini F. (2019). Simplified seismic vulnerability assessment of railway masonry arch bridges, 10th New York City Bridge Conference, August 26-27, 2019.
60. Milanesi, R.R., Andreotti, G., Morandi, P., Penna, A. (2019). FEM simulation of the in-plane seismic experimental response of r.c. frames with unreinforced and bed-joint reinforced AAC masonry infills, Proc. COMPDYN 2019, 24-26 June 2019, Crete, Greece.
61. Milanesi, R.R., Totoev, Y., Morandi, P., Rossi, A., Magenes, G. (2019). Estimation of basic dynamic characteristics of pliable masonry infills with horizontal sliding joints from in-plane test results, Proc. COMPDYN 2019, 24-26 June 2019, Crete, Greece.
62. Rossi, A., Morandi, P., Milanesi, R.R., Magenes, G. (2019). Economic and technical advantages of an innovative infill solution in the seismic response of RC buildings, Proc. 4th International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), 22-23 May 2019, Pavia, Italy.
63. Faravelli M., Polli D., Quaroni D., Onida M., Pagano M., Di Meo A., Borzi B. (2019). Italian platform for seismic risk and damage scenario evaluation. 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering COMPDYN, 24-26 June 2019, Crete, Greece.
64. Özcebe A.G., Smerzini C., Paolucci R., Pourshayegan H., Rodríguez Plata R., Lai C.G., Zuccolo E., Bozzoni F., Villani M. (2019). On the comparison of 3D, 2D, and 1D numerical approaches to predict seismic site amplification: The case of Norcia basin during the M6.5 2016 October 30 earthquake. Proceedings of the VII ICEGE 7th International Conference on Earthquake Geotechnical Engineering, Rome, Italy, 17-20 June 2019.
65. Rodríguez Plata R., Özcebe A.G., Smerzini C., Lai C.G., Zuccolo E., Bozzoni F. (2019). A comparative study on time domain 1D/2D seismic ground response analysis of Norcia basin during the M6.5 2016 October 30 earthquake. Proceedings of the VII ICEGE 7th International Conference on Earthquake Geotechnical Engineering, Rome, Italy, 17-20 June 2019.
66. Cosentini R, Bozzoni F., Conca D., Lai C.G. (2019). Developing fragility curves for earth-retaining walls along the Italian roadway network. Proceedings of the VII ICEGE 7th International Conference on Earthquake Geotechnical Engineering, Rome, Italy, 17-20 June 2019.
67. Lai C.G., Bozzoni F., Meisina C., Poggi V., Zuccolo E., Bonì R., Conca D., Famà A., Cosentini R. (2019). Mapping the liquefaction hazard at different geographical scales. Proceedings of the VII ICEGE 7th International Conference on Earthquake Geotechnical Engineering, Rome, Italy, 17-20 June 2019.
68. Shinde S., Bozzoni F., Lai C.G., Cubrinovski M. (2019). Liquefaction demand parameters best correlated to damage on buried pipeline networks: the case study of Christchurch. Proceedings of the VII ICEGE 7th International Conference on Earthquake Geotechnical Engineering, Rome, Italy, 17-20 June 2019.
69. Meisina C., Bonì R., Bordoni M., Lai C.G., Famà A., Bozzoni F., Cosentini R.M., Castaldini D., Fontana D., Lugli S., Ghinoi A., Martelli L., Severi P. (2019). 3D geological model reconstruction for liquefaction hazard assessment in the Po Plain. Proceedings of the VII ICEGE 7th International Conference on Earthquake Geotechnical Engineering, Rome, Italy, 17-20 June 2019.
70. Gomez J.C., Bozzoni F., Famà A., Lai C.G. (2019). Assessment of earthquake-induced- risk of soil liquefaction using CPT-based methods: application to the case study of Cavezzo municipality (Italy). Geophysical Research Abstracts, European Geosciences Union General Assembly 2019, EGU 2019, April 7-12 2019, Vienna, Austria.
71. Lai C.G., Conca D., Meisina C., Bonì R., Bozzoni F. (2019). Earthquake-induced soil liquefaction risk: macrozonation of the European territory taking into account exposure. Proceedings of the IABSE Symposium “Towards a Resilient Built Environment – Risk and Asset Management”, March 27-29, 2019, Guimarães, Portugal.
72. Crowley H., Rodrigues D., Silva V., Despotaki V., Marins L. Romão X., Castro J.M., Pereira N., Pomonis A., Lemoine A., Roullé A., Tourlière B., Weatherill G., Pitilakis K., Danciu L., Correira A.A. Akkar S., Hancilar U., Covi P. (2019). The European Seismic Risk model 2020 (ESRM20). Proceedings of 2nd International Conference on Natural Hazards and Infrastructure, ICONHIC 2019.
73. Crowley H., Silva V., Despotaki V., Martins L., Atalić J. (2019). European Seismic Risk Model 2020: Focus on Croatia, Proceedings of Scientific Symposium Future Trends in Civil Engineering, Zagreb, Croatia, https://doi.org/10.5592/CO/FTCE.2019.03.
74. Silva V, Calderon A, Costa C, Dabbeek J, Martins L, Rao A, Yepes-Estrada C, Acevedo A, Crowley H, Jaiswal K, Journeay M, Pittore M (2020). Exploring probabilistic seismic risk assessment to monitor the Sendai Framework for Disaster Risk, Proceedings of 17th World Conference on Earthquake Engineering, Sendia, Japan.
75. Yepes-Estrada C, Silva V, Rao A, Amo-Oduro D, Calderon A, Costa C, Dabbeek J, Despotaki V, Martins L, Acevedo A, Crowley H, Journeay M (2020). Development of a Global Exposure Model for Regional Seismic Risk Assessment, Proceedings of 17th World Conference on Earthquake Engineering, Sendia, Japan.
76. Crowley H., Silva V., Despotaki V., Martins L., Atalić J. (2019). European Seismic Risk Model 2020: Focus on Croatia. Proceedings of Scientific Symposium FUTURE TRENDS IN CIVIL ENGINEERING, Zagreb, Croatia, https://doi.org/10.5592/CO/FTCE.2019.03
77. Crowley H, Silva V, Kalakonas P, Martins L, Weatherill G, Pitilakis K, Riga E, Borzi B, Faravelli M (2020). Verification of the European Seismic Risk Model (ESRM20), Proceedings of 17th World Conference on Earthquake Engineering, Sendia, Japan.
78. Di Meo A., Borzi B., Bellotti D., Bruno F. (2019). Bibliographic review of Italian regulations from 1900 to the present for the simulated design of Italian railway bridges. Proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering COMPDYN, 24-26 June 2019, Crete, Greece.
79. Bellotti D., Famà A., Di Meo A., Borzi B. (2019). Fragility curves for large-scale assessment of RC railway bridges. Proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering COMPDYN, 24-26 June 2019, Crete, Greece.
80. Bellotti D., Famà A., Di Meo A., Borzi B. (2019). Large-scale vulnerability analysis of girder railway bridges. Proceedings of the 10th New York City Bridge Conference – August 26-27, 2019, New York City, USA.
81. Morandi P., Manzini C.F., Borzi B., Mauro A., Vecchi A., Tisalvi M., Iacobini F. (2019). Simplified seismic vulnerability assessment of railway masonry arch bridges. Proceedings of the 10th New York City Bridge Conference – August 26-27, 2019, New York City, USA.
82. Bellotti D., Borzi B., Famà A., Quaroni D., Vecchi A., Mauro A., Vergara L., Tisalvi M., Iacobini F. (2019). Development of web-based tools for large-scale post-seismic emergency management of railway infrastructures. Proceedings of the 10th New York City Bridge Conference – August 26-27, 2019, New York City, USA.
83. Pavese A., Furinghetti M. (2019). Consequences of Mechanical Properties Variability of Seismic Isolation Systems on the Structural Response of Buildings, COMPDYN 2019 – 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering – Mini-Symposium MS38.
84. Furinghetti M., Pavese A., Rizzo Parisi E. (2019). Static condensation procedure of finite element models for fast non-linear time history analyses of base-isolated structures, COMPDYN 2019 – 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering – Mini-Symposium MS38.
85. Furinghetti M., Pavese A. (2019). Assessment of the Seismic Response of Isolated Bridges under extra-stroke displacement demands, IABSE Symposium 2019, March 27-29, 2019, Guimarães, Portugal.
86. Furinghetti M., Pavese A. (2019). Comparison between radial and bidirectional responses of a base isolated building equipped with concave surface slider devices, 16WCSI, 16th World Conference on Seismic Isolation, energy dissipation and active vibration control of structures – St. Petersburg (Russia).
87. O’Reilly, G.J., Abarca, A., Monteiro, R., Borzi, B., Calvi, G.M. (2019). Towards Regional Safety Assessment of Bridge Infrastructure, ICASP13 – 13th International Conference on Applications of Statistics and Probability in Civil Engineering, Seoul, South Korea.
88. O’Reilly, G.J., Monteiro, R. (2019). On the Efficient Risk Assessment of Bridge Structures, COMPDYN 2019 – 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Crete Island, Greece.
89. Salic, R., Sesov, V., Edip, K., Zuccolo, E., Monteiro, R., Vitanova, M., Micajkov, S., and Petreski, B. (2019). Seismic Hazard and Earthquake Accelerogram Selection for Structural Analysis of Bridges on Republic Of N. Macedonia, 18th International Symposium of Macedonian Association of Structural Engineers (MASE 2019), Ohrid, North Macedonia.
90. Vitanova, M., Sesov, V., Micajkov, S., Abarca, A., Monteiro, R., Salic, R., Edip, K., Micov, V., and Petreski, B. (2019). Classification of Existing Bridges in R.N. Macedonia using Improved Bridge Inventory Database,” 18th International Symposium of Macedonian Association of Structural Engineers (MASE 2019), Ohrid, North Macedonia.
91. Abarca, A., O’Reilly, G.J., Monteiro, R., Vitanova, M., Daniel, Y., Bellotti, D., Di Meo, A., Zuccolo, E., Salic, R., Edip, K., Borzi, B., Sesov, V., Calvi, G.M., Offir, Y. (2020). Regional Safety Assessment of Existing Bridge Infrastructure Exposed to Seismic Hazard,” 17th World Conference on Earthquake Engineering, Sendai, Japan.
92. Monteiro, R., Abarca, A., O’Reilly, G.J., Kechidi, S., Bellotti, D., Borzi, B., Castro, J.M. (2020). Development of Fragility Curves for Large-Scale Seismic Risk of RC Structures,” 17th World Conference on Earthquake Engineering, Sendai, Japan.

 

Articoli conferenze nazionali

93. Albanesi, L., Morandi, P., Magenes, G. (2019). Valutazione della resistenza al taglio di pareti in mattoni: confronto tra criteri di verifica e risultati sperimentali, Proc. XVIII ANIDIS, 15-19 September 2019, Ascoli Piceno, Italy.
94. Milanesi R.R., Morandi, P., Hak, S., Magenes, G. (2019). Risposta fuori piano di tamponature robuste in laterizio, Proc. XVIII ANIDIS, 15-19 September 2019, Ascoli Piceno, Italy.
95. Cattari S., Ottonelli D., Degli Abbati S., Magenes G., Manzini C.F., Morandi P., Spacone E., Camata G., Marano C., Caliò I., Pantò B., Cannizzaro F., Occhipinti G., Calderoni B., Cordasco E.A., de Miranda S., Castellazzi G., Maria D’Altri A., Saetta A., Talledo D., Berto L. (2019). Uso dei codici di calcolo per l’analisi sismica non lineare di edifici in muratura: confronto dei risultati ottenuti con diversi software su un caso studio reale, Proc. XVIII ANIDIS, 15-19 September 2019, Ascoli Piceno, Italy.
96. Dolce M., Garro G., Griner F., Sicoli R., Speranza E., Bocchi F., Borzi B., Di Meo A., Faravelli M., Savadori L., Sillari G., Dolce A. (2019). Più sai e meno rischi: Sicuro+, per sensibilizzare i cittadini sul tema del rischio sismico. Atti del XVIII Convegno L’Ingegneria Sismica in Italia ANIDIS, 15-19 settembre 2019, Ascoli Piceno, Italy, Paper N. 3365.
97. Dolce M., Borzi B., Da Porto F., Faravelli M., Lagomarsino S., Magenese G., Moroni C., Penna A., Prota A., Speranza E., Zuccaro G., Verderame G.M. (2019). Mappe di rischio sismico per il territorio italiano. Atti del XVIII Convegno L’Ingegneria Sismica in Italia ANIDIS, 15-19 settembre 2019, Ascoli Piceno, Italy, Paper N. 3549.
98. Dolce M., Garro G., Griner F., Sicoli R., Speranza E., Bocchi F., Borzi B., Di Meo A., Faravelli M., Savadori L., Sillari G., Dolce A. (2019). La comunicazione del rischio sismico dalla comunità scientifica ai cittadini: SICURO+. Atti del 38esimo Convegno Nazionale Gruppo Nazionale di Geofisica della Terra Solida GNGTS, 12-14 novembre 2019, Roma, Italy.
99. Grilli S., Radice A., Maffeis G., Gianfreda R., Fumagalli M., Pollastri L., Salerno R., Sterlacchini S., Cappellini G., Voltolina D., Zazzeri M., Bordogna G., Boschetti M., Brivio P. A., Ceresi A., Pepe M., Rampini A., Stroppiana D., Faravelli M., Polli D. (2019). SIMULATOR-ADS: uno strumento a supporto della gestione delle emergenze. Atti della 23esima Conferenza Nazionale Federazione delle Associazioni Scientifiche per le Informazioni Territoriali e Ambientali ASITA, 12-14 novembre 2019, Trieste, Italy.
100. Faravelli M., Borzi B., Bozzoni F., Pascale V., Quaroni D. (2019). Scenari di danno e perdite per strutture e infrastrutture della costa. Atti del XVIII Convegno L’Ingegneria Sismica in Italia ANIDIS, 15-19 settembre 2019, Ascoli Piceno, Italy, Paper N. 3380.
101. Furinghetti M., Pavese A. (2019). Numerical Parametric Study on Property Modification Factors of Isolation Devices”, XVIII Convegno ANIDIS “L’ingegneria Sismica in Italia” – Pistoia (Italy) – Special Session SS01.
102. Furinghetti M., Pavese A. (2019). Cloud Computing Strategies for Health Monitoring of Bridge Structural Systems”, XVIII Convegno ANIDIS “L’ingegneria Sismica in Italia” – Pistoia (Italy) – Special Session SS05.

Articoli su rivista internazionale

1. Ercolino, M. Bellotti, D. Magliulo, G., Nascimbene, R. (2018). Vulnerability analysis of industrial RC precast buildings designed according to modern seismic codes, Engineering Structures, Volume 158, 1 March 2018, Pages 677.
2. Brunesi, E., Nascimbene, R (2018). Effects of structural openings on the buckling strength of cylindrical shells, Advances in Structural Engineering, 1 March 2018.
3. Perrone, D, Calvi, P.M. Nascimbene, R., Fischer, E.C. Magliulo, G. (2018). Seismic performance of nonstructural elements during the 2016 Central Italy earthquake Bulletin of Earthquake Engineering, 6 April 2018, Pages 123.
4. Brunesi, E., Peloso, S., Pinho, R., Nascimbene, R. (2018). Cyclic testing of a fullscale twostorey reinforced precast concrete wallslabwall structure, Bulletin of Earthquake Engineering, 6 April 2018, Pages 131.
5. Brunesi, E., Nascimbene, R., Peloso, S (2018). Evaluation of the Seismic Response of Precast Wall Connections: Experimental Observations and Numerical Modeling, Journal of Earthquake Engineering, 6 May 2018, Pages 126.
6. Merino Vela, R.J., Brunesi, E., Nascimbene, R. (2018). Derivation of floor acceleration spectra for an industrial liquid tank supporting structure with braced frame systems, Engineering Structures. Volume 171, 15 September 2018, Pages 105122.
7. Brunesi, E., Peloso, S., Pinho, R., Nascimbene, R. (2018). Cyclic testing and analysis of a fullscale castinplace reinforced concrete wallslabwall structure, Bulletin of Earthquake Engineering, Volume 16, Issue 10, 1 October 2018, Pages 47614796.
8. Wijesundara, K.K., Nascimbene, R. Rassati, G.A. (2018). Evaluation of the seismic performance of suspended zipper column concentrically braced steel frames, Journal of Constructional Steel Research, Volume 150, November 2018, Pages 452461.
9. Andreotti G., Graziotti F., Magenes G., (2018). Detailed micromodelling of the direct shear tests of brick masonry specimens: the role of dilatancy, Engineering Structures, Vol. 168, 1 August 2018, pp. 929949.https://doi.org/10.1016/j.engstruct.2018.05.019
10. Cattari S., Camilletti D., Lagomarsino S., Bracchi S., Rota M., Penna A. (2018). Masonry Italian codeconforming buildings. Part 2: nonlinear modelling and timehistory analysis, Journal of Earthquake Engineering.
11. Di Ludovico M., Digrisolo A., Moroni C., Graziotti F., Manfredi V., Prota A., Dolce M., Manfredi G. (2018). Remarks on damage and response of school buildings after the Central Italy earthquake sequence, Bulletin of Earthquake Engineering. DOI: 10.1007/s105180180332x
12. Di Sarno L., da Porto F., Guerrini G., Calvi P., Camata G., Prota A. (2018). Seismic Performance of Bridges during the 2016 Central Italy Earthquakes. Bulletin of Earthquake Engineering.
13. Franchin P., Ragni L., Rota M., Zona A. (2018). Modelling uncertainties of Italian codeconforming structures for the purpose of seismic response analysis, Journal of Earthquake Engineering.
14. Graziotti F., Penna A., Magenes G. (2018). A comprehensive in situ and laboratory testing programme supporting seismic risk analysis of URM buildings subjected to induced earthquakes, Bulletin of Earthquake Engineering. https://doi.org/10.1007/s1051801804786
15. Graziotti F., Tomassetti U., Sharma S., Grottoli L., Magenes G. (2018). Experimental response of URM single leaf and cavity walls in outofplane twoway bending generated by seismic excitation, Construction and Building Materials. DOI: 10.1016/j.conbuildmat.2018.10.076
16. Guerrini G., Restrepo J.I. (2018). Extent of Plasticity in Reinforced Concrete Columns. ACI Structural Journal, September 2018.
17. Hak S., Morandi P., Magenes G. (2018). Prediction of interstorey drifts for regular RC structures with masonry infills based on bare frame modelling, Bulletin of Earthquake Engineering, Vol. 16, pp. 397425. https://doi.org/10.1007/s105180170210y
18. Kallioras S., Graziotti F., Penna A. (2018). Numerical Assessment of the Dynamic Response of a URM Terraced House Exposed to Induced Seismicity. Bulletin of Earthquake Engineering. DOI: 10.1007/s1051801804955
19. Kallioras S., Guerrini G., Tomassetti U., Marchesi B., Penna A., Graziotti F., Magenes G. (2018). Experimental Seismic Performance of a FullScale Unreinforced ClayMasonry Building with Flexible Timber Diaphragms. Engineering Structures, Vol. 161, pp.231249. DOI: 10.1016/j.engstruct.2018.02.016
20. Kallioras S., Guerrini G., Tomassetti U., Peloso S., Graziotti F. (2018). Dataset from the dynamic shaketable test of a fullscale unreinforced claymasonry building with flexible diaphragms. Data in Brief, Vol. 18, pp. 629640. DOI: 10.1016/j.dib.2018.03.047
21. Malomo D., Pinho R., Penna A. (2018). Using the Applied Element Method for modelling calciumsilicate brick masonry subjected to inplane cyclic loading, Earthquake Engineering and Structural Dynamics, Vol. 47, No. 7, pp. 16101630.
22. Manzini C.F., Magenes G., Penna A., da Porto F., Camilletti D., Cattari S., Lagomarsino S. (2018). Masonry Italian codeconforming buildings: Part 1: case studies and design methods Journal of Earthquake Engineering.
23. Mazzoni S., Castori G., Galasso C., Calvi P., Dreyer R., Fischer E., Fulco A., Sorrentino L., Wilson J., Penna A. (2018). 2016-17 Central Italy Earthquake Sequence: Seismic Retrofit Policy and Effectiveness, Earthquake Spectra.
24. Milanesi R.R., Morandi P., Magenes G. (2018). Local effects on RC frames induced by AAC masonry infills through FEM simulation of inplane tests, Bulletin of Earthquake Engineering, pp. 128. 10.1007/s1051801803535.
25. Morandi P., Albanesi L., Graziotti F., Li Piani T., Penna A., Magenes G. (2018). Development of a dataset on the inplane experimental response of URM piers with bricks and blocks, Construction and Building Materials, Vol. 190, pp. 593611. https://doi.org/10.1016/j.conbuildmat.2018.09.070.
26. Morandi P., Hak S., Magenes G. (2018). Mechanical characterization and forcedisplacement hysteretic curves from inplane cyclic tests on strong masonry infills, Data in Brief, 16 (2018) 886-904. https://doi.org/10.1016/j.dib.2017.12.015
27. Morandi P., Hak S., Magenes G. (2018). Performancebased interpretation of inplane cyclic tests on RC frames with strong masonry infills, Engineering Structures. Vol. 156, 1 February 2018, pp. 503-521. https://doi.org/10.1016/j.engstruct.2017.11.058
28. Morandi P., Milanesi R.R., Magenes G. (2018). Innovative solution for seismicresistant masonry infills with sliding joints: inplane experimental performance, Engineering Structures, Vol. 176, 1 December 2018, pp. 719-733. https://doi.org/10.1016/j.engstruct.2018.09.018.
29. Penna A., Galasco A., Tondelli M., Rota M., Magenes G. (2019). Seismic vulnerability of old Italian railway stations RILEM Bookseries Vol. 18, 2019, pp. 12291237
30. Ronald, J.A., Menon, A., Prasad, A.M., Menon, D., Magenes, G. (2018). Modelling and analysis of South Indian temple structures under earthquake loading, Sadhana Academy Proceedings in Engineering Sciences, Vol. 43, No. 5.
31. Rosti A., Rota M., Penna A. (2018). Damage classification and derivation of damage probability matrices from L’Aquila (2009) postearthquake survey data, Bulletin of Earthquake Engineering, Vol. 16, No. 9, pp. 36873720, DOI: 10.1007/s1051801803526
32. Senaldi I., Guerrini G., Caruso M., Graziotti F., Magenes G., Beyer K., Penna A. (2018) Experimental seismic response of a halfscale stone masonry building aggregate: effects of retrofit strategies, RILEM Bookseries, Vol. 18, pp. 13721381.
33. Senaldi I., Guerrini, G., Caruso, M., Graziotti, Magenes, G., Beyer, K., Penna, A., (2019). Experimental Seismic Response of a HalfScale Stone Masonry Building Aggregate: Effects of Retrofit Strategies, RILEM Bookseries. Volume 18, 2019, Pages 13721381.
34. Sorrentino L., Cattari S., da Porto F., Magenes G., Penna A. (2018). Seismic behaviour of ordinary masonry buildings during the 2016 central Italy earthquakes, Bulletin of Earthquake Engineering (accepted).
35. Tomassetti U., Correia A.A., Candeias P.X., Graziotti F., Campos Costa A. (2018). Twoway bending outofplane collapse of a fullscale URM building tested on a shake table, Bulletin of Earthquake Engineering. (accepted).
36. Tomassetti U., Graziotti F., Penna A., Magenes G. (2018). Modelling oneway outofplane response of singleleaf and cavity walls, Engineering Structures. Vol. 167, 15 July 2018, pp. 241255. https://doi: 10.1016/j.engstruct.2018.04.007
37. Tomassetti U., Graziotti F., Penna A., Magenes G. (2018). Corrigendum to – Modelling oneway outofplane response of single leaf and cavity walls (Eng. Struct. 167 (2018) 241-255), Engineering Structures, in press.
38. Zhang Z., Fleischman R., Restrepo J.I., Guerrini G., Nema A., Zhang D., Shakya U., Tsampras G., Sause R. (2018). Shake Table Test Performance of an Inertial ForceLimiting Floor Anchorage System. Earthquake Engineering and Structural Dynamics, August 2018.
39. Pavese, A., Furinghetti, M., Casarotti, C. (2018). Experimental Assessment of the Cyclic Response of FrictionBased Isolators under Bidirectional Motions, Soil Dynamics and Earthquake Engineering, DOI: 10.1016/j.soildyn.2018.06.031
40. O’Reilly, Gerard J., Daniele Perrone, Matthew J. Fox, Igor Lanese, Ricardo Monteiro, André Filiatrault, and Alberto Pavese. – System Identification and Seismic Assessment Modelling Implications for Italian School Buildings. Journal of Performance of Constructed Facilities. doi:10.1061/(ASCE)CF.19435509.000123.
41. Andreotti G., Famà A., Lai, C.G. (2018). Hazard Dependent Soil Factors for Site Specific Elastic Acceleration Response Spectra of Italian and European Seismic Building Codes, Bulletin of Earthquake Engineering, July 2018. DOI: https://doi.org/10.1007/s1051801804229
42. Lanzo G., Tommasi P., Ausilio A., Aversa S., Bozzoni F., Cairo R., d’Onofrio A., Durante M.G., Foti S., Giallini S., Mucciacciaro M., Pagliaroli A., Sica S., Silvestri F., Vessia G., Zimmaro P. (2018). Reconnaissance of geotechnical aspects of the 2016 Central Italy earthquakes, Bulletin of Earthquake Engineering. March 2018.
43. Waseem M., Lai C.G., Spacone E. (2018). Seismic Hazard Assessment of Northern Pakistan, Natural Hazards, Vol. 90, pp. 563600. January 2018.
44. Borzi B., Faravelli M., Polli D. (2018), – Central Italy sequence: simulated damage scenario for the main 2016 shocks, Bull Earthquake Eng, DOI: 10.1007/s1051801803789
45. Di Meo A., Borzi B., Faravelli M., Pagano M., Ceresa P., Monteiro R., AlDabbeek J. (2018), – Seismic Vulnerability Assessment of the Urban Building Environment in Nablus, Palestine, International Journal of Architectural Heritage, Volume 12 Numbers 7-8, Special Issue on New trends and challenges in largescale and urban assessment of seismic risk in historical centres, DOI: 10.1080/15583058.2018.1503364
46. Onida M., Faravelli M., Gotti A., Sarigiannis D. (2018). Communicating multihazard health risk through a webgis platform: a casestudy, in pubblicazione su Fresenius Environmental Bulletin (FEB).
47. Cademartori M., Morassi C., Siano R., Faravelli M., Brunesi E. (2018). Seismic Risk Analysis of Pressure Vessels, in pubblicazione su Fresenius Environmental Bulletin (FEB).
48. Dolce M., Speranza E., Giordano F., Borzi B., Bocchi F., Conte C., Di Meo A., Faravelli M., Pascale V. (2018), – Observed damage database of past Italian earthquakes for the improvement of seismic risk assessment for civil protection purpose: the DaD.O. WebGIS, Special Issue of Bollettino di Geofisica Teorica ed Applicata, accettato.
49. Grigoratos I., Monteiro R., Ceresa P., Di Meo A., Faravelli M., Borzi B, (2018), – Crowdsourcing exposure data for seismic vulnerability assessment in Nablus, Palestine, Journal of Earthquake Engineering, submitted.

 

Articoli su rivista nazionale

50. Di Sarno L., da Porto F., Guerrini G., Prota A. (2018). Analysis of the Structural Response of Some Bridges during the Central Italy Earthquake. Progettazione Sismica.
51. Simone Peloso, Chiara Casarotti, Alberto Pavese, Filippo Dacarro, Giuseppe Sinopoli (2018). Risposta di un edificio esistente in c.a. progettato per soli carichi verticali: prove pushover in sito e analisi numeriche Progettazione Sismica Vol.10, N.2, Anno 2018.
52. Filippo Dacarro, Davide Bolognini (2018). Collaudo del Laboratorio Mobile Progettazione Sismica Vol.9, N.1, Anno 2018.
53. Davide Bolognini, Filippo Dacarro (2018). Prove di qualifica sismica su tavola vibrante di trasformatori di tensione Progettazione Sismica Vol.10, N.2, Anno 2018.

 

Capitoli di libro

54. Romão X., Penna A. (2018). Codebased procedures for seismic safety assessment and retrofit, In: Strengthening and Retrofitting of Existing Structures, pp. 301320, Springer, Singapore.
55. Guerrini G., Graziotti F., Penna A., Magenes G. (2018). Dynamic ShakeTable Tests on Two FullScale, Unreinforced Masonry Buildings Subjected to Induced Seismicity. In: Experimental Vibration Analysis for Civil Structures, J.P.
56. Conte, R. Astroza, G. Benzoni, G. Feltrin, K.L. Loh, and B. Moaveni, Eds., Springer International Publishing, Basel, Switzerland, 2018.

 

Articoli conferenze internazionali

57. Alfredo GonzalezFonseca , Enrico Spacone , Roberto Nascimbene, – Development of a PerformanceBased Seismic Design Framework for RC Floor Diaphragms in Dual Systems, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
58. Samar Momin, Mohammad Mohinuddin Ahmed, Emanuele Brunesi, Roberto Nascimbene, Fabrizio Paolacci, – Seismic fragility of a piperack system based on incremental dynamic analysis, Proceedings of the ASME 2018 Pressure Vessels and Piping Conference, PVP2018, July 1520, 2018, Prague, Czech Republic.
59. Albanesi L., Morandi P., Graziotti F., Li Piani T., Penna A., Magenes G. (2018). Database collecting inplane test results of URM piers with bricks and blocks, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
60. Albanesi, L., Morandi, P., Graziotti, F., Li Piani, T., Penna, A., Magenes, G. (2018). Lateral strength of URM piers: comparison between codified criteria and inplane test results, Proceedings 10th International Masonry Conference, July 911 2018, Milano, Italy.
61. Bonura V., Jafari S., Zapico Blanco B., Graziotti F. (2018). Interpretation of insitu shear test for brick masonry: a benchmark study, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
62. Bracchi S., Galasco A., Penna A., Magenes G. (2018). An improved macroelement model for the nonlinear analysis of masonry buildings, 10th Australasian Masonry Conference, Sydney, Australia.
63. Cattari S., Camilletti D., Magenes G., Manzini C.F., Morandi P., Spacone E., Camata G., Marano C., Calio’ I., Cannizzaro F., Occhipinti G., Panto’ B., Calderoni B., Cordasco A.E., Sandoli A. (2018). A comparative study on a 2storey benchmark case study through nonlinear seismic analysis, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
64. Correia A. A., Tomassetti U., Campos Costa A., Penna A., Magenes G., Graziotti F. (2018). Collapse shaketable test on URMtimber roof substructure, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
65. Graziotti F., Guerrini G., Rossi A., Andreotti G., Magenes G. (2018). Proposal for an improved procedure and interpretation of ASTM C1531 for the insitu determination of brickmasonry shear strength, ASTM Selected Technical Papers: 2018 Masonry Symposium, San Diego, California, United States.
66. Graziotti F., Tomassetti U., Grottoli L., Penna A., Magenes G. (2018). Fullscale outofplane shaking table tests of URM walls in twoway bending, Proceedings of the 10th Australasian Masonry Conference, 1114 February 2018, Sydney, Australia.
67. Guerrini G., Senaldi I., Comini P., Kallioras S., Vanin F., Godio M., Graziotti F., Magenes G., Beyer K., Penna A. (2018). Experimental and Numerical Assessment of The Seismic Performance of a HalfScale Stone Masonry Building Aggregate, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, June 1821.
68. Guerrini G., Senaldi I., Di Santo F., Tomassetti U., Graziotti F., Magenes G., Beyer K., Penna A. (2018). Experimental Seismic Response of a Half Scale Natural Stone Masonry Building Aggregate, Proc. 10^th International Masonry Conference, Milan, 911 July 2018.
69. Kallioras S., Morandi P., Penna A., Magenes G. (2018). Seismic performance assessment of three modern masonry buildings struck by the 2012 Emilia earthquake. Proceedings of the 10th International Masonry Conference, Milan, Italy.
70. Malomo D., Comini P., Pinho R., Penna A. (2018). The Applied Element Method and the modelling of both inplane and outofplane response of URM walls, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, June 1821.
71. Malomo D., Pinho R., Penna A. (2018). Using the Applied Element Method to simulate the dynamic response of fullscale URM houses tested to collapse or nearcollapse conditions, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, June 1821.
72. Malomo D., DeJong M.J., Penna A. (2018). Distinct Element modelling of the inplane failure mechanisms of URM walls. Proceedings 10th International Masonry Conference, Milan, Italy.
73. Manzini C.F., Morandi P., Milanesi R.R., Magenes G. (2018). Shakingtable test on a twostorey RC frames structure with innovative infills with sliding joints, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
74. Milanesi R.R., Morandi P., Magenes G. (2018). Local effects due to AAC masonry infillRC frame interaction through simulation of inplane tests with FEM analyses, Proceedings 16th Eupean Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
75. Milanesi R.R., Morandi P., Penna A., Magenes G. (2018). Seismic performance of AAC masonry infill from traditional systems to innovative solutions, Proceedings of the 6th International Conference of AAC, Postdam, Germania, 36 September 2018.
76. Morandi P., Manzini C.F., Bossi E., Magenes G. (2018). Modern masonry buildings struck by the 2012 Emilia earthquake: seismic design according to European codes of three case studies, Proceedings 10th International Masonry Conference, July 911 2018, Milano, Italy.
77. Morandi P., Milanesi R.R., Manzini C.F., Magenes G. (2018). Outofplane shakingtable tests of an innovative masonry infill with sliding joints, Proceedings of the 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
78. Morandi P., Milanesi R.R., Manzini C.F., Magenes G. (2018). Outofplane response of an innovative masonry infill with sliding joints subjected to dynamic tests on shaking table, Proceedings 10th Australasian Masonry Conference, 1114 February 2018, Sydney, Australia.
79. Rossi A., Morandi P., Albanesi L., Magenes G. (2018). Effects of the irregular distribution in elevation of masonry infills in RC buildings, Proceedings of the 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
80. Rosti A., Rota M., Penna A. (2018). Exploring the effect of different damage definitions on the empirical building vulnerability, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, June 1821.
81. Rota M., Rosti A., Penna A., Fiorini E., Magenes G. (2018). A multiscale methodology to compare seismic hazard results with historical macroseismic observations, Proceedings 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, June 1821.
82. Senaldi I., Guerrini G., Scherini S., Morganti S., Magenes G., Beyer K., Penna A. (2018). Natural Stone Masonry Characterization for The ShakingTable Test of A Scaled Building Specimen, Proc. 10th International Masonry Conference, Milan, 911 July 2018.
83. Sharma S., Tomassetti U., Grottoli L., Graziotti F., Magenes G. (2018). OutofPlane Shaking Table Tests on URM Single Leaf and Cavity Walls in TwoWay Bending, Proceedings of the 10th International Masonry Conference, July 911 2018, Milano, Italy.
84. Zapico Blanco B., Tondelli M., Jafari S., Graziotti F., Millekamp H., Rots J., Palmieri M. (2018). A masonry catalogue for the Groningen region, Proceedings of the 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 1821 June 2018.
85. Zhang Z., Nema A., Guerrini G., Shakya U., Tsampras G., Fleischman R., Restrepo J.I., Sause R., Zhang D., Maffei J., Mar D., Monti G. (2018). An Inertial ForceLimiting Floor Anchorage System for LowDamage Building Structures. Proc. 11th U.S. National Conference on Earthquake Engineering, Los Angeles, CA, USA, June 2529, 2018.
86. Furinghetti, M., Pavese, A. (2018). Comparison of the Experimental Response of Curved and Flat Sliding Motions, 16ECEE – 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, June 1821 2018.
87. Lanese, I., Pavese, A., Furinghetti, M. (2018). Hybrid Testing of Seismic Isolated Structures: Facing Time and Geometry Scaling Issues, 16ECEE – 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, June 1821 2018.
88. Furinghetti, M., Peloso, S., Lanese, I., Lenzo, S., Pavese, A. (2018). Optimized Design of Seismic Isolation Systems for Existing Bridges, 40th IABSE Symposium, 1921 September 2018, Nantes, France.
89. Bozzoni F., Lai C.G., Marsan P., Conca D., Famà A. (2018). WebGIS Platform for Seismic Risk Assessment of Maritime Port Systems in Italy, Proceedings, 4th PIANC Mediterranean Days Congress 2018, Sevilla, Spain, October 17-19, 2018.
90. Bozzoni F., Zuccolo E., Lai C.G. (2018). Assessment of the Performance of a Novel Regional LowMagnitude GMPE for Southern Italy, Proceedings, 16th European Conference on Earthquake Engineering, Thessaloniki, Greece. June, 1821, 2018.
91. Chiaradonna A., Özcebe A.G., Bozzoni F., Famà A., Zuccolo E., Lai C.G., Flora A., Cosentini R., d’Onofrio A., Bilotta E., Silvestri F. (2018). Numerical Simulation of Soil Liquefaction During the 20 May 2012 M6.1 Emilia Earthquake in Northern Italy: the Case Study of Pieve di Cento, Proceedings, 16th European Conference on Earthquake Engineering, Thessaloniki, Greece. June, 18-21, 2018.
92. Fasano G., Bilotta E., Flora A., Fioravante V., Giretti D., Lai C.G., Özcebe A.G. (2018). Dynamic centrifuge testing to assess liquefaction potential, Proceedings, 9th International Conference on Physical Modelling in Geotechnics, ICPMG 2018, City, University of London, UK, July 17-20, 2018.
93. Massa M., Mascandola C., Lovati S., Carannante S., Morasca P., d’Alema E., Franceschina G., Gomez A., Poggi V., Martelli L., Lai C.G. (2018). Seismic and Geological Bedrock Depth Estimation at Cavezzo Site (Po Plain, Northern Italy): Example of Passive Geophysical Survey in the Assessment of Soil Liquefaction Potential, Geophysical Research Abstracts, European Geosciences Union General Assembly 2018, EGU 2018, April 813, 2018. Vienna, Austria. EGU20187882.
94. Paolucci R., Villani M., Smerzini C., Lai C., Özcebe A.G., Zuccolo E., Bozzoni F., Rodrìguez Plata R. (2018). 3D PhysicsBased Numerical Modelling of the 30th October 2016 Norcia Earthquake, Book of Abstracts, 36^th General Assembly of the European Seismological Commission, ESC 2018, September 27, 2018. Valletta, Malta. ESC2018S151028.
95. Visini F., Pace B., Meletti C., Marzocchi W., MPS16T3 Working Group ((…), Lai, C., Zuccolo, E.) (2018). New Seismicity Models for the Next Italian Seismic Hazard Model, Book of Abstracts, 36th General Assembly of the European Seismological Commission, ESC 2018, September 27, 2018. Valletta, Malta. ESC2018S15175.
96. Faravelli M., Borzi B., Pagano M., Quaroni D. (2018). Using OpenQuake to define seismic risk and real time damage scenario in Italy, 16th European Conference on Earthquake Engineering, 1821 June 2018, Thessaloniki, Greece.
97. Casarotti C., Pavese A., Peloso S. (2018). EUCENTRE and seismic emergency: in situ support activities after the central italy earthquake, 16 ECEE, Thessaloniki, June 1821 2018.
98. Peloso S., Casarotti C., Pavese A., Dacarro F., Sinopoli G. (2018). Numerical modelling of an existing two storey rc frame designed for gravity loads and comparison with experimental results of in situ full scale pushover test, 16 ECEE, Thessaloniki, June 1821 2018.
99. Riccardo Milanesi, Paolo Morandi, Filippo Dacarro, Luca Albanesi, Guido Magenes – InPlane Cyclic and OutofPlane Dynamic Testing Procedures for Infilled RC Frames 7AESE – Special Session 1B.
100. Simone Peloso, Chiara Casarotti, Alberto Pavese, Filippo Dacarro, Giuseppe Sinopoli – In situ pushover test of an existing two storey RC frame designed for gravity loads 7AESE – Special Session 1°.
101. Davide Bolognini, Filippo Dacarro, Simone Peloso, Giuseppe Sinopoli, Gian Michele Calvi – Test of a Mobile System for InSitu Dynamic Experimental Tests on Real Scale Buildings1 Sensors & Actuators Congress – Stockholm 0306 September 2018 – Published by VBRI Press.

 

Articoli conferenze nazionali

102. Chiaradonna A., Andreotti G., Lai C.G., Bilotta E., Flora A. (2018). Prediction of Dynamic Response of a Liquefiable Subsoil to a Cyclic Excitation Applied at the Free Surface, Proceedings. Annual Meeting of Italian Researchers in Geotechnical Engineering, IARG 2018, Genoa, July 46, 2018 (in Italian).
103. Lai C.G., Bozzoni F., Poggi V., Zuccolo E., Meisina C., Famà A., Conca D., Bonì R., Cosentini R., Martelli L., Özcebe A.G. (2018). Seismic Microzonation for Liquefaction Risk, Proceedings, XXV Conference of Geotechnics of Torino (CGT 2018) entitled – Analyses and Design of Geotechnical Systems in Seismic Areas. Torino, Italy, November 89, 2018 (in Italian).

Articoli su rivista internazionale

1. Ahmad N., Ali Q., Crowley H., Pinho R. (2014). Earthquake loss estimation of residential buildings in Pakistan, Natural Hazards, DOI 10.1007/s11069-014-1174-8
2. Apostolakis, G., Dargush, G. and Filiatrault, A. (2014). Computational Framework for Automated Seismic Design of Self-Centering Connections in Steel Frames, ASCE Journal of Computing in Civil Engineering, 28(2), 170-181.
3. Belleri A., Brunesi E., Nascimbene R., Pagani M., Riva P. (2014). Seismic performance of precast industrial facilities following major earthquakes in the Italian territory. J. Peform. Constr. Fac. 2014; DOI 10.1061/(ASCE)CF.1943-5509.0000617.
4. Brunesi E., Bolognini D., Nascimbene R. (2014). Evaluation of the shear capacity of precast-prestressed hollow core slabs: numerical and experimental comparisons. Mater. Struct. 2014; DOI 10.1617/s11527-014-0250-6.
5. Brunesi E., Nascimbene R., Bolognini D., Bellotti D. (2014). Experimental investigation of the cyclic response of reinforced precast concrete framed structures, PCI Journal 2014; accepted for publication.
6. Brunesi E., Nascimbene R., Pagani M., Beilic D. (2014). Seismic performance of storage steel tanks during the May 2012 Emilia, Italy, Earthquakes. J. Peform. Constr. Fac. 2014; DOI 10.1061/(ASCE)CF.1943-5509.0000628.
7. Brunesi E., Nascimbene R., Rassati G.A. (2014). Response of partially-restrained bolted beam-to-column connections under cyclic loads. J. Constr. Steel Res. 2014; DOI 10.1016/j.jcsr.2014.01.014.
8. Brunesi E., Nascimbene R. (2014). Extreme response of reinforced concrete buildings through fiber force-based finite element analysis. Eng. Struct. 2014; DOI 10.1016/j.engstruct.2014.03.020.
9. Calvi P.M. (2014). Relative Displacement Floor Spectra for Seismic Design of Non-structural Elements, Journal of Earthquake Engineering, Vol. 18, Issue 7, 2014.
10. Calvi P.M., T.J. Sullivan (2014). Estimating Floor Spectra in Multiple Degree of Freedom Systems, Earthquakes and Structures, Volume 7, Number 1, July 2014, pages 017-38.
11. Farhidzadeh, A., Dehghan-Niri, E., Zhong, Z., Salamone, S., Aref, A. and Filiatrault, A. (2014). Post-Earthquake Evaluation of Pipelines Rehabilitated with Cured in Place Lining Technology using Acoustic Emission, Construction and Building Materials 54C, 326-338.
12. Filiatrault, A., Sullivan, T. (2014). Performance-based Seismic Design of Nonstructural Building Components: The Next Frontier of Earthquake Engineering, Earthquake Engineering and Engineering Vibration, Special Issue on the State-of-the-art and Future Challenges of Earthquake Engineering, 13(1) Supplement, 17-46.
13. Fox M.J., Sullivan T.J., Beyer K. (2014). Capacity design of coupled RC walls, Journal of Earthquake Engineering, published online DOI 10.1080/13632469.2014.904255.
14. Fox M.J., Sullivan T.J., Beyer K. (2014). Comparison of force-based and displacement-based design approaches for RC coupled walls in New Zealand, Bulletin of the New Zealand Society for Earthquake Engineering, accepted.
15. Hamidia, M., Filiatrault, A., Aref J.A. (2014). Seismic Collapse Capacity Based Evaluation and Design of Frame Buildings with Viscous Dampers Using Pushover Analysis, ASCE Journal of Structural Engineering, 04014153-1, 04014153-12.
16. Hamidia, M., Filiatrault, A. and Aref J.A. (2014). Simplified Seismic Sidesway Collapse Analysis of Buildings, Earthquake Engineering & Structural Dynamics, 43: 429-448.
17. Harb M., De Vecchi D., Dell’Acqua F. (2014). Review on physical vulnerability proxies from remote sensing. Submitted to IEEE Geoscience and Remote Sensing Magazine, accepted, 2014.
18. Lai C.G., Bozzoni F., Mangriotis M.D., Martinelli M. (2014). Soil liquefaction during the May 20, 2012 M5.9 Emilia earthquake, Northern Italy: field reconnaissance and post-event assessment. Earthquake Spectra In-Press. http://dx.doi.org/10.1193/011313EQS002M. October 2014.
19. Magenes G., Penna A., Senaldi I., Rota M., Galasco A. (2014). Shaking Table Test of a Strengthened Full-Scale Stone Masonry Building with Flexible Diaphragms, International Journal of Architectural Heritage, Taylor and Francis, Vol. 8, Issue 3, 2014 DOI: 10.1080/15583058.2013.826299.
20. Moon, L., Dizhur, D., Senaldi, I., Derakhshan, H., Griffith, M., Magenes, G., Ingham, J. (2014). The demise of the URM building stock in Christchurch during the 2010/2011 Canterbury earthquake sequence. Earthquake Spectra, 30:1, 253-276.
21. Mouyannou A., Rota M., Penna A., Magenes G. (2014). Identification of Suitable Limit States from Nonlinear Dynamic Analyses of Masonry Structures, Journal of Earthquake Engineering, Taylor and Francis, Volume 18, Issue 2, 2014, DOI: 10.1080/13632469.2013.842190.
22. Mouyiannou, A., Penna, A., Rota, M., Graziotti, F., Magenes, G. (2014). Cumulated seismic damage on unreinforced masonry buildings, Bulletin of the NZ Society for Earthquake Engineering.
23. Nicknam, A. and Filiatrault, A. 2015. Direct Displacement-Based Seismic Design of Propped Rocking Walls, Earthquake Spectra, 31(1), 179-196.
24. Nievas, C.I., Sullivan, T.J. (2014). Applicability of the Direct Displacement-Based Design Method to Steel Moment Resisting Frames with Setbacks, Bulletin of Earthquake Engineering, Submitted.
25. Pagani, M., Monelli, D., Weatherill, G., Danciu, L., Crowley, H., Silva, V., Henshaw, P., Butler, L., Nastasi, M., Panzeri, L., Simionato, M. and Vigano, D. (2014). OpenQuake Engine: An open hazard (and risk) software for the Global Earthquake Model, Seismological Research Letters, Vol. 85, No. 3, pp. 692-702.
26. Penna A., Lagomarsino S., Galasco A. (2014). A nonlinear macro-element model for the seismic analysis of masonry buildings, Earthquake Engineering & Structural Dynamics, 43(2): 159-179.
27. Penna A., Morandi P., Rota M., Manzini C.F., da Porto F., Magenes G. (2014). Performance of masonry buildings during the Emilia 2012 earthquake, Bulletin Of Earthquake Engineering, doi: 10.1007/s10518-013-9496-6.
28. Pessina V., Fiorini E. (2014). A GIS procedure for fast topographic characterization of seismic recording stations, Soil Dynamics and Earthquake Engineering, 63, 248-258.
29. Pieralice F., Proietti R., La Valle P., Giorgi G., Mazzolena M., Taramelli A., Nicoletti L. (2014). An innovative methodological approach in the frame of Marine Strategy Framework Directive: a statistical model based on ship detection SAR data for monitoring programmes, Marine Environmental Research, In review.
30. Restrepo-Vélez, L.F., Magenes, G., Griffith, M.C. (2014). Dry Stone Masonry Walls in Bending – Part I: Static Tests. International Journal of Architectural Heritage, Taylor and Francis, Volume 8, Issue 1, January 2014, pages 1-28, DOI: 10.1080/15583058.2012.663059, 2013.
31. Roldán, R. Sullivan, T., Della Corte, G. (2014). Displacement-Based Design of Steel Moment Resisting Frames with Partially-Restrained Beam-to-Column Joints (to be published).
32. Rota M., Bracchi S., Penna A., Magenes G. (2014). Effect of modelling uncertainties on the results of pushover analysis of masonry buildings, Submitted to Engineering Structures.
33. Rota M., Penna A., Magenes G. (2014). A framework for the seismic assessment of existing masonry buildings accounting for different sources of uncertainty. Earthquake Engng Struct. Dyn. 2014; 43:1045–1066, DOI: 10.1002/eqe.2386.
34. Senaldi I., Magenes G., Penna A., Galasco A., Rota M. (2014). The Effect of Stiffened Floor and Roof Diaphragms on the Experimental Seismic Response of a Full-Scale Unreinforced Stone Masonry Building, Journal of Earthquake Engineering, Taylor and Francis, Volume 18, Issue 3, 2014, DOI: 10.1080/13632469.2013.876946.
35. Sideris, P., Aref, A., Filiatrault, A. (2014). Effects of Anchorage Hardware on the Cyclic Tensile Response of Unbonded Monostrands, PCI Journal Summer 2014, Precast/Prestressed Concrete Institute. 60-77.
36. Sideris, P., Aref, A., Filiatrault, A. (2014). Quasi-static Cyclic Testing of a Large-Scale Segmental Column with Controlled Joint Sliding, ASCE Journal of Bridge Engineering, 19(10), 04014036-1 to 04014036-11.
37. Sideris P., Aref A., Filiatrault A. (2014). Large-scale Seismic Testing of Hybrid Sliding-Rocking Post-tensioned Segmental Bridge System, ASCE Journal of Structural Engineering, 140 (6), 04014025-1 to 04014025-15.
38. Silva V., Crowley H., Pinho R., Varum H, Sousa L. (2014). Investigation of the characteristics of the Portuguese RC building stock and development of a vulnerability model, Bulletin of Earthquake Engineering, 10.1007/s10518-014-9669-y.
39. Silva V., Crowley H., Pinho R., Varum H. (2014). Seismic Risk Assessment for mainland Portugal, Bulletin of Earthquake Engineering, 10.1007/s10518-014-9630-0.
40. Soroushian S., Zaghi A.E., Maragakis E.M., Echevarria A., Tian Y., Filiatrault A. (2014). Seismic Fragility Study of Fire Sprinkler Piping Systems with Grooved Fit Joints, ASCE Journal of Structural Engineering, 04014157-1, 04014157-15.
41. Sullivan, T.J., Welch, D.P., Calvi, G.M. (2014). Simplified Loss Estimation for Seismic Performance Classification, in State-of-the-Art and Future Challenges of Earthquake Engineering, Journal of Earthquake Engineering and Engineering Vibration, Vol. 13, No. S1, pp. 95-122.
42. Taramelli A., DiMatteo L., Ciavola P., Guadagnano F., Tolomei C. (2014). Temporal evolution of patterns and processes of the coastal area in Bevano Estuary (Northern Adriatic) – Italy. Accepted and in press in Ocean and Coastal Management.
43. Taramelli A., Valentini E., Sterlacchini S. (2014). A GIS-based approach for hurricane hazard and vulnerability assessment in the Cayman Islands. Accepted and in press in Ocean and Coastal Management.
44. Tian Y., Filiatrault A., Mosqueda G. (2014). Experimental Seismic Fragility of Pressurized Fire Suppression Sprinkler Piping Joints, Earthquake Spectra, 30(4). 1733-1748.
45. Vaculik, J., Griffith, M.C., Magenes, G. (2014). Dry stone masonry walls in bending – Part II: Analysis, International Journal of Architectural Heritage, Taylor and Francis. Volume 8, Issue 1, January 2014, pages 29-48 DOI: 10.1080/15583058.2012.663060.
46. Valentini E., Taramelli A., Filipponi F., Giulio S. (2014). An effective procedure for EUNIS and Natura 2000 habitat mapping in estuarine ecosystems integrating ecological knowledge and remote sensing analysis, Accepted and in press in Ocean and Coastal Management.
47. Welch D.P., Sullivan T.J., Filiatrault A. (2014). Potential of Building Information Modelling for Seismic Risk Mitigation in Buildings, Bulletin of The New Zealand Society for Earthquake Engineering, 47 (4), 11 p.
48. Welch D.P., Sullivan T.J., Calvi G.M. (2014). Developing Direct Displacement-Based Procedures for Simplified Loss Assessment in Performance-Based Earthquake Engineering, Journal of Earthquake Engineering, Vol. 18, No. 2, pp. 290-322.
49. Welch D.P., Sullivan T.J., Filiatrault A. (2014). Potential of Building Information Modelling for Seismic Risk Mitigation in Buildings, Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 47, No. 4.
50. Zhong Z., Bouziou D., Wham B., Filiatrault A., Aref A., O’Rourke T.D., Stewart H.E. (2014). Seismic Testing of Critical Lifelines Rehabilitated with Cured in Place Pipeline Lining Technology, Journal of Earthquake Engineering, 18(6), 964-985.

 

Articoli su rivista nazionale

1. Bellotti D., Casotto C., Crowley H., Deyanova M. G., Germagnoli F., Fianchisti G., Lucarelli E., Riva S., Nascimbene R. (2014). Capannoni monopiano prefabbricati: distribuzione probabilistica dei sistemi e sottosistemi strutturali dagli anni sessanta ad oggi, Progettazione sismica, no. 3, 2014.
2. Famà, A., Bozzoni, F., Lai, C.G. (2014). Valutazione in ambiente GIS del danno sismico di strutture portuali marittime: il caso del porto di Gioia Tauro. Progettazione Sismica. Vol. 5, No. 2, Maggio-Settembre 2014, pp. 49-72.
3. Famà A., Bozzoni F., Lai C.G. (2014). Modellazione geotecnica e suscettibilità alla liquefazione per la valutazione della vulnerabilità sismica di strutture portuali marittime: il porto di Gioia Tauro. N.3/2014 Progettazione Sismica.

 

Capitoli di libro

1. Calvi, G.M., Sullivan, T.J., Welch, D.P. (2014). A Seismic Performance Classification Framework to Provide Increased Seismic Resilience, Chapter 11 in Perspectives on European Earthquake Engineering and Seismology, A. Ansal (ed.), Geotechnical, Geological and Earthquake Engineering 34, DOI 10.1007/978-3-319-07118-3_11, Springer.

  

Articoli conferenze internazionali

1. Andreotti, G., Lai, C.G, (2014). Seismic Vulnerability of Deep Tunnels: Numerical Modeling for a Fully Nonlinear Dynamic Analysis. 2ECEES (Second European Conference on Earthquake Engineering and Seismology). Istanbul, Turkey, August 25-29, 2014.
2. Baio Dias, A., da Porto, F., Fehling, E., Lourenço, P., Morandi, P., Vintzileou, E., Yakut, A. (2014). Innovative systems for earthquake resistant masonry enclosures in rc buildings, Proc. of the 9th International Masonry Conference 2014, 7-9 July 2014, Guimarães, Portugal.
3. Bianchi A., Borzi B., Faravelli M., Herrmann M., Zechar J.D. and Marzocchi W. (2014). JRA4: Real-time Seismic Risk, Proceedings of the Second European Conference on Earthquake Engineering and Seismology, 25-29 August 2014, Istanbul.
4. Bozzoni, F., Famà, A., Lai, C.G., Mirfattah, S.A. (2014). Seismic risk assessment of seaports using GIS: the port of Gioia Tauro in Southern Italy. Proceedings 33rd PIANC World Congress, San Francisco, USA, June 1-5, 2014.
5. Brunesi E, Nascimbene R, Rassati G.A. (2014). Seismic performance of steel MRF with partially-restrained bolted beam-to-column connections through FE simulations. Structures Congress 2014 – Structural Engineering Institute, Boston, Massachusetts, April 2014.
6. Calvi P.M., Bentz E.C., Collins M.P. (2014). Shear Stress Transfer across Major Cracks in Reinforced Concrete, Proceedings of the 10th fib International PhD Symposium in Civil Engineering July 21 to 23, 2014, Université Laval, Québec, Canada.
7. Calvi P.M., Sullivan TJ. (2014). Improved Estimation of Floor Spectra in RC Wall Buildings, Proceedings of the 10th National Conference in Earthquake Engineering, Earthquake Engineering Research Institute, Anchorage, AK, 2014.
8. Calvi, G.M., Sullivan, T.J., Welch, D.P. (2014). A Seismic Performance Classification Framework to Provide Increased Seismic Resilience, 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, August 25-29. (Keynote Paper).
9. De Vecchi D., Dell’Acqua F. (2014). A case study on fusion of seismic damage information from space-borne and ground-based imaging of L’Aquila, 2009 Earthquake. International Geoscience and Remote Sensing Symposium IGARSS, 14-18 July, Québec City, Canada, 2014.
10. De Vecchi D., Dell’Acqua F. (2014). A global, disaster-cycle approach to damage and recovery monitoring. Symposium on earthquake and landslide risk in Central Asia and Caucasus: exploiting remote sensing and geo-spatial information management, 29-30 January, Bishkek, Kyrgyzstan, 2014.
11. Fiorini E., Bazzurro P. (2014). Macroseismic intensity constraint for probabilistically based shakemaps, Proceedings of the Second European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, paper no. 1448.
12. Fiorini E., Bazzurro P., Silva V. (2014). Preliminary results of risk targeted design maps for Italy, Proceedings of the Second European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, paper no. 1580.
13. Furinghetti M., C. Casarotti, Pavese A. (2014). Bi-Directional Experimental Response Of Full Scale DCSS Devices (2014), Second European Conference on Earthquake Engineering and Seismology (2ECEES), Istanbul.
14. Graziotti, F., Magenes, G., Penna, A. (2014). A direct method to compute the inelastic displacement demand of masonry structures, European conference on earthquake engineering and seismology, Istanbul, TR.
15. Graziotti, F., Penna, A., Bossi, E., Magenes, G. (2014). Evaluation of displacement demand for unreinforced masonry buildings by equivalent SDOF systems, Eurodyn 2014, Porto, PT.
16. Graziotti, F., Penna, A., Magenes, G. (2014). Influence of timber lintels on the cyclic behaviour of stone masonry spandrels, International Masonry Conferece 2014, Guimarães, PT.
17. Harb M., De Vecchi D., Dell’Acqua F. (2014). A novel approach in co registering remotely sensed data. European Geoscience Union (EGU) General Assembly, 27-02 May, Vienna, Austria, 2014.
18. Harb M., De Vecchi D., Dell’Acqua F. (2014). Multi-risk buildings exposure and physical vulnerability mapping from optical satellites: developing an integrated toolset. International Geoscience and Remote Sensing Symposium IGARSS, 14-18 July, Québec City, Canada, 2014.
19. Harb M., De Vecchi D., Dell’Acqua F. (2014). Remote sensing-based vulnerability proxies in the EU FP7 project SENSUM. Symposium on earthquake and landslide risk in Central Asia and Caucasus: exploiting remote sensing and geo-spatial information management, 29-30 January, Bishkek, Kyrgyzstan, 2014.
20. Magenes, G., Penna, A., Senaldi, I., Galasco, A. (2014). Numerical simulation of the experimental seismic response of unreinforced stone masonry buildings with stiffened diaphragms and improved wall-to-diaphragm connections 9th International Masonry Conferece, Guimaraes, Portugal.
21. Morandi, P., Albanesi, L., Magenes, G. (2014). URM walls with thin shell/web clay units and unfilled head-joints: cyclic in-plane tests, Proc. of the 2nd European Conference on Earthquake Engineering and Seismology, August 25-29 2014, Istanbul, Turkey.
22. Morandi, P., Hak S., Magenes, G. (2014). In-plane Experimental Response of Strong Masonry Infills, Proc. of the 9th International Masonry Conference 2014, 7-9 July 2014, Guimarães, Portugal.
23. Morandi, P., Magenes, G. (2014). Experimental and numerical researches in support of seismic design of masonry buildings, Proc. of the symposium: Future trends in Civil Engineering, invited lecture, 17-18 February 2014, Zagreb, Croatia.
24. Nievas, C.I. and Sullivan, T.J. (2014). Developing the Direct Displacement-Based Design Method for RC Strong Frame – Weak Wall Structures, Second European Conference on Earthquake Engineering and Seismology, Istanbul Aug. 25-29, IN PRESS.
25. Nievas, C.I. and Sullivan, T.J. (2014). Higher Mode Effects in the Direct Displacement-Based Design of Steel Moment Resisting Frames with Setbacks, Second European Conference on Earthquake Engineering and Seismology, Istanbul Aug. 25-29.
26. Penna, A., Magenes, G., Senaldi, I., Galasco, A. (2014). Equivalent-frame macro-element simulation of shaking table tests on unreinforced stone masonry buildings with strengthening interventions 9th International Conference on Structural Analysis of Historical Construction, Mexico City, Mexico.
27. Penna, A., Senaldi, I., Magenes, G., Galasco, A. (2014). Nonlinear pushover analysis of unreinforced masonry buildings with diferent levels of diaphragm stiffening 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey.
28. Rota M., Penna A., Bracchi S., Magenes G. (2014). Seismic assessment of masonry buildings considering different uncertainties, 9th International Conference on Structural Analysis of Historical Constructions, Mexico City, Mexico, 2014.
29. Spillatura A., Fiorini E., Bazzurro P., Pennucci D. (2014). Harmonization of vulnerability curves for masonry buildings, Proc. of Second European Conference on Earthquake Engineering and Engineering Seismology 2014 (2ECEES 2014), Istanbul, Turkey, August 25-29.
30. Tarque, N., Bozzoni, F., Lai, C.G., Miccadei, E., Piacentini, T., Camata, G., Spacone E. (2014). Seismic ground response analysis at the site of San Felice Church in Poggio Picenze (L’Aquila, Italy). Proceedings 10NCEE, Tenth U.S. National Conference on Earthquake Engineering Frontiers of Earthquake Engineering, Anchorage, Alaska, July 21-25, 2014.
31. Welch, D.P., Sullivan, T.J., Filiatrault, A. (2014). Equivalent Structural Damping of Drift-Sensitive Nonstructural Building Components, 10th U.S. National Conference on Earthquake Engineering, Anchorage, AK, July 21-25.

 

Articoli conferenze nazionali

1. Andreotti, G., Lai, C.G. (2014). Modello Numerico per la Valutazione della Vulnerabilità Sismica di Gallerie Profonde. XXV Convegno Nazionale Di Geotecnica. Baveno (VB), 4-6 Giugno 2014.
2. Bellotti D. (2014). Intervento al seminario l’analisi dei capannoni industriali in emergenza post sismica, presso Palazzo Bernardini, Lucca in collaborazione con il Dipartimento della Protezione Civile, il 27 maggio 2014.
3. De Vecchi D., Dell’Acqua F., Lisini G. (2014). A global, disaster-cycle approach to damage and recovery monitoring. 2014 IEEE workshop on Environmental, Energy and Structural monitoring systems, 17-18 September, Naples, Italy, 2014.
4. De Vecchi D., Harb M., Dell’Acqua F. (2014). Refining registration of large, multi-temporal stacks of medium-resolution images: a novel, automated approach for Big Heritage Data. Proceedings of ESA BiDS ’14, Frascati, Italy, 2014.
5. Furinghetti M., Pavese A. and Casarotti C. (2014). Experimental and Analytical Assessment of the 3D Response of Concave Surface Slider (CSS) Devices. 14th International ROSE Seminar (May 2014, Pavia).
6. Morandi P., Magenes G. (2014). Criticità relative alla progettazione antisismica di edifici a telaio in c.a. con tamponamenti in laterizio, Atti Giornate AICAP 2014, 22-24 Maggio 2014, Bergamo, Italia.

 

Rapporti di ricerca

1. Calvi P.M., Filiatrault A. (2014). Role and Importance of Non-Structural Elements in the Seismic Vulnerability of School Buildings in Past Earthquakes, technical report submitted to the European Centre for Training and Research in Earthquake Engineering (Eucentre), Pavia, Italy, November 1, 2014.
2. Calvi P.M., Filiatrault A. (2014). Vulnerabilità degli Elementi non Strutturali in Edifici Scolastici, technical report (in Italian) submitted to the European Centre for Training and Research in Earthquake Engineering (Eucentre), Pavia, Italy, December 1, 2014.
3. Calvi P.M., Filiatrault A. (2014). Assessment of Cracked Reinforced Concrete Bridge Structures, technical report submitted to the European Centre for Training and Research in Earthquake Engineering (Eucentre), Pavia, Italy, December 31, 2014.
4. Roldán, R., Welch, D.P., Nievas, C.I., Sullivan, T.J., Correia, A., Calvi, G.M. (2014). Guidelines for the Performance-Based Seismic Design of Steel MRF Structures, Report EUCENTRE 2014/02, IUSS Press, Pavia, Italy.
5. Roldán, R., Welch, D., Nievas, C.I., Sullivan, T.J., Correia, A., Calvi G.M. (2014). Guidelines for the Performance-Based Seismic Design of Steel MRF Structures, Research Report EUCENTRE 2014/02, IUSS Press, Pavia, Italy, IN PRESS.
6. Sullivan, T.J., O’Reilly, G.J. (Eds)(2014). Characterising the Seismic Behaviour of Steel Beam-Column Joints for Seismic Design. Research Report EUCENTRE – 2014/01. Pavia, Italy: IUSS Press.

 

Lavori originali – rassegne

1. Cattaneo A.G., Gornati R., Bernardini G., Sabbioni E., Manzo L., Di Gioacchino M. (2014). Nanomedicine for the brain and the eyes: disease management in poorly accessible districts of the body. In Nanotoxicology and Nanomedicine, S.C. Sahu and D.A. Casciano, Johns Wiley and Sons, Chichester UK, 2014, pp. 223-247. ISBN 978-1-118-43926-5.
2. Cattaneo A.G., Gornati R., Bernardini G., Sabbioni E., Manzo L., Di Gioacchino M. (2014). Testing nanotoxicity: an update of new and traditional methods. In Nanotoxicology and Nanomedicine, S.C. Sahu and D.A. Casciano, Johns Wiley and Sons, Chichester UK, 2014, p. 3-34. ISBN 978-1-118-43926-5.
3. Vecchio S., Giampreti A., Petrolini V., Lonati D., Protti A., Papa P., Rognoni C., Valli A., Rocchi L., Rolandi L., Manzo L., Locatelli C. (2014). Metformin accumulation: Lactic acidosis and high plasma metformin levels in a retrospective case series of 66 patients on chronic therapy. Clin Toxicol, 52: 129-135 (2014).

Articoli su rivista internazionale

1. Asprone D., Auricchio F., Menna C., Prota A., Morganti S., Reali A. (2013). Statistical Finite Element Analysis of the Buckling Behavior of Honeycomb Structures. Composite Structures, 105 (2013), 240-255. http://www.journals.elsevier.com/composite-structures/
2. Asprone D., Auricchio F., Reali A. (2013). Modified Finite Particle Method: applications to elasticity and plasticity problems. Published online on International Journal of Computational Methods, doi: 10.1142/S0219876213500503.
3. Auricchio F., Balduzzi G., Lovadina C. (2013). The dimensional reduction modelling approach for 3D beams: Differential equations and finite-element solutions based on Hellinger-Reissner principle. International Journal of Solids and Structures, 50 (2013), 4184-4196.
4. Auricchio F., Beirao da Veiga L., Kiendl J., Lovadina C., Reali A. (2013). Locking-free isogeometric collocation methods for spatial Timoshenko rods. Computer Methods in Applied Mechanics and Engineering, 263 (2013), 113-126. http://www.journals.elsevier .com/computer-methods-in-applied-mechanics-and-engineering/
5. Auricchio F., Beirao da Veiga L., Lovadina C., Reali A., Taylor R.L., Wriggers P. (2013). Approximation of incompressible large deformation elastic problems: some unresolved issues. Published online on Computational Mechanics, doi: 10.1007/s00466-013-0869-0.
6. Auricchio F., Bonetti E. (2013). A new flexible 3D macroscopic model for shape memory alloys. Discrete and Continuous Dynamical Systems, 6, 277-291. https://www.aimsciences.org/journals/home .jsp?journalID=15
7. Calabrese A., Lai C.G. (2013). Fragility Functions of Blockwork Wharves Using Artificial Neural Networks. Soil Dynamics and Earthquake Engineering, Vol. 52, pp. 88-102.
8. Correia A.A., Almeida J.P., Pinho R. (2013). Seismic energy dissipation in inelastic frames: understanding state-of-the-practice damping models, Structural Engineering International, Issue 2013/2, pp. 148-158.
9. Costa A.A., Arêde A., Campos Costa A., Penna A., Costa A. (2013). Out-of-plane behaviour of a full scale stone masonry façade. Part 2: shaking table tests, Earthquake Engineering and Structural Dynamics, 42(14): 2097-2111.
10. Costa A.A., Arêde A., Campos Costa A., Penna A., Costa A. (2013). Out-of-plane behaviour of a full scale stone masonry façade. Part 1: specimen and ground motion selection, Earthquake Engineering and Structural Dynamics, 42(14): 2081-2095.
11. Costa A.A., Arêde A., Penna A., Costa A. (2013). Free rocking response of a regular stone masonry wall with equivalent block approach: experimental and analytical evaluation Earthquake Engineering and Structural Dynamics, 42(15): 2297-2319.
12. Javed M., Magenes G., Alam B., Khan A.N., Ali Q., Syed A.M. (2013). Experimental seismic performance evaluation of unreinforced brick masonry shear walls, Earthquake Spectra, doi: 10.1193/ 111512EQS329M.
13. Lagomarsino S., Penna A., Galasco A., Cattari S. (2013). TREMURI Program: an equivalent frame model for the nonlinear seismic analysis of masonry buildings, Engineering Structures, 56(11): 1787-1799.
14. Mourabit T., Abou Elenean K.M. Ayadi A., Benouar D., Ben Suleman A., Bezzeghoud M., Cheddadi A., Chourak M., ElGabry M.N., Harbi A., Hfaiedh M., Hussein H.M., Kacem J., Ksentini A., Jabour N., Magrin A., Maouche S., Meghraoui M., Ousadou F., Panza G.F., Peresan A., Romdhane N., Vaccari F., Zuccolo E. (2013). Neo-deterministic seismic hazard assessment in North Africa. Journal of Seismology. DOI 10.1007/s10950-013-9375-2.
15. Nascimbene R. (2013). An arbitrary cross section, locking free shear-flexible curved beam finite element, International Journal of Computational Methods in Engineering Science and Mechanics, 14(2), pp. 90-103.
16. Nascimbene R. (2013). Analysis and optimal design of fiber-reinforced composite structures: sail against the wind, Wind and Structures, An International Journal, 16(6), pp. 541-560.
17. Pinho R., Marques M., Monteiro R., Casarotti C., Delgado R. (2013). Evaluation of Nonlinear Static Procedures in the assessment of building frames, Earthquake Spectra, Volume 29, No. 4, pp. 1459-1476.
18. Pinho R., Marques M., Monteiro R., Casarotti C., Delgado R. (2013). Evaluation of Nonlinear Static Procedures in the Assessment of Building Frames, Earthquake Spectra In Press. doi: http://dx. doi.org/10.1193/100910EQS169M.
19. Rezaiee-Pajand M., Auricchio F., Sharifian M. (2013). Computational plasticity of mixed hardening pressure-dependency constitutive equations. Published online on Acta Mechanica, doi 10.1007/ s00707-013-0998-8.
20. Sanchez-Lizarraga H., Lai C.G. (2013). Effects of Spatial Variability of Soil Properties on the Seismic Response of an Embankment Dam. Soil Dynamics and Earthquake Engineering. January.
21. Silva S., Crowley H., Pagani M., Monelli D., Pinho R. (2013). Development of the OpenQuake engine, the Global Earthquake Model’s open-source software for seismic risk assessment, Natural Hazards, Vol. 66.
22. Silva V., Crowley H., Pinho R., Varum H. (2013). Extending displacement-based earthquake loss assessment (DBELA). for the computation of fragility curves, Engineering Structures, Vol. 56, 343-356.
23. Smyrou E., Sullivan T., Priestley N., Calvi G.M. (2013). Sectional Response of T-Shaped RC walls, Bulletin of Earthquake Engineering, Vol. 11, Issue 4, pp 999-1019.
24. Sullivan T.J, Calvi G.M., Nascimbene R. (2013). Towards Improved Floor Spectra Estimates for Seismic Design, Earthquakes and Structures, Vol.4, No. 1.
25. Sullivan T.J. (2013). Direct displacement-based seismic design of steel eccentrically braced frame structures, Bulletin of Earthquake Engineering, 11(6), pp.2197-2231, DOI: 10.1007/s10518-013-9486-8.
26. Sullivan T.J. (2013). Highlighting differences between force-based and displacement-based design solutions for RC frame structures, Structural Engineering International, 2/2013.
27. Sullivan T.J., Calvi P.M., Nascimbene R. (2013). Towards improved floor spectra estimates for seismic design, Earthquakes and Structures, 4(1), pp. 109-132, 2013.
28. Tarque N., Lai C.G., Bozzoni F., Miccadei E., Piacentini T., Camata G., Spacone E. (2013). Expected ground motion at the historical site of Poggio Picenze, Central Italy, with reference to current Italian Building Code. Engineering Geology Journal, Vol. 166, pp. 100-115.
29. Uprety P., Yamazaki F., Dell’Acqua F. (going to press). Damage Detection using High-Resolution SAR Imagery in the 2009 L’Aquila, Italy, Earthquake. Earthquake Spectra (ISSN:8755-2930). p. 130823090138008.
30. Zuccolo E., Corigliano M., Lai C.G. (2013). Probabilistic Seismic Hazard Assessment of Italy Using Kernel Estimation Methods. Journal of Seismology, Vol. 17, pp. 1001-1020.

 

Articoli su rivista nazionale

1. Hak, S., Morandi, P., Magenes, G. (2013). Evaluation of infill strut properties based on in-plane cyclic tests, Građevinar, Vol. 65, No. 6, pp. 509-521.
2. Taverna L., Zuccolo E., Corigliano M., Rota M., Lai C.G., Penna A. (2013). Accelerogrammi Reali Spettro-Compatibili per l’Intero Territorio Italiano. Progettazione Sismica, Vol. 4, No. 2, pp. 63-79. Maggio-Agosto 2013.
3. Taverna L., Zuccolo E., Corigliano M., Rota M., Lai C.G., Penna A. (2013). Definizione di accelerogrammi reali spettro-compatibili per l intero territorio nazionale, Progettazione Sismica, Vol. 4, No. 02, pp. 63-79.

 

Capitoli di libro

1. Borzi B., Ceresa P., Faravelli M., Fiorini E., Onida M. (2013). Seismic risk assessment of Italian school buildings, all’interno del libro Computational Methods in Earthquake Engineering, Vol. 2, Springer editore, ISBN: 978-94-007-6572-6, ISSN: 1871-3033 pp. 317-344.
2. Casarotti C., Furinghetti M., Pavese A. (2013). Evaluation of Response of an Isolated System Based on Double Curved Surface Sliders, Computational Methods in Earthquake Engineering, DOI 10.1007/978-94-007-6573-3_19, Springer.
3. Hak S., Morandi P., Magenes G. (2013). Damage Control of Masonry Infills in Seismic Design, Research Report EUCENTRE 2013/01, IUSS Press, Pavia. ISBN: 978-88-6198-088-4.

  

Articoli conferenze internazionali

1. Al Dabbeek J., Ceresa P., Borzi B., Germagnoli F. (2013). Seismic Risk Mitigation in Palestine: SASPARM Project, In: Reducing Earthquake Losses in the Extended Mediterranean Region. UNESCO, Fuengirola (Malaga). Spain, 28-31 October 2013.
2. Andreotti G., Lai C.G., Martinelli M. (2013). Seismic Vulnerability of near-fault deep tunnels using analytical fragility cuves. Proceedings International Conference Earthquake Geotechnical Engineering -ICEGE 2013. June 17-19, 2013, Istanbul, Turkey.
3. Andreotti, G., Lai C.G., Bozzoni F., Scandella L. (2013). Hazard-dependent soil amplification factors derived from 1D fully stochastic ground response analyses. Proceedings ICEGE 2013, International Conference Earthquake Geotechnical Engineering. Istanbul, Turkey, June 17-19, 2013.
4. Bozzoni F., Lai C.G., Mangriotis M.D., Margiotta S. (2013). Definition of Seismic Input at the archeological site of Marte Ultore Temple in Rome (Italy). Proceedings International Conference on Rehabilitation and Restoration of Structures, Chennai, India, February 13-16, 2013.
5. Brunesi E., Nascimbene R., Rassati G.A. (2013). Evaluation of the response of partially restrained bolted beam-to-column connection subjected to cyclic pseudo-static loads, Structures 2013 Congress, Pittsburgh, 2-4 May 2013.
6. Ceresa P., Brezzi F., Calvi G.M. (2013). Modelling a large scale uniaxial shaking table facility, In: (a cura di): Papadrakakis M, Fragiadakis M, Plevris V, Proceedings of the 4th Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). Paper n. 1561, Kos Island, Greece, 12-14 June 2013.
7. Correia A.A., Pecker A., Kramer S.L., Pinho R. (2013). An innovative deep foundation macro-element model for seismic analysis of pile/column supports, Proceedings of the 5th International Young Geotechnical Engineers Conference, Paris, France.
8. Friedl H., Uberseder T., Bui T.T., De Roeck G., Peloso S., Pitilakis D., Zulfikar C., Karapetrou S. (2013). Field testing for seismic vulnerability assessment. Proceedings of the Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013, Vienna (AU).
9. Graziotti F., Penna A., Magenes G. (2013). Use of equivalent SDOF systems for the evaluation of displacement demand for masonry buildings. In: Adam C., Heuer R., Lehnardt W., Schran C. Proceedings Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013). Vienna, Austria.
10. Hak S., Morandi P., Magenes G. (2013). Local effects in the seismic design of RC frame structures with masonry infills, Proc. of the 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 12-14 June 2013, Kos Island, Greece.
11. Lanese I., Pavese A. (2013). Design, Implementation and Validation of a Real-Time Dynamic Hybrid HybridTesting System Mainly Oriented to Seismic Isolated Structures Testing System Mainly Oriented to Seismic Isolated Structures, proceeding of the 5th International Conference on Advances in Experimental Structural Engineering November 8-9, 2013, Taipei, Taiwan.
12. Magenes G., Penna A., Galasco A., Rota M., Senaldi I. (2013). Experimental investigation on the effect of diaphragm in-plane stiffness on the seismic response of masonry buildings, Proceedings 12th Canadian Masonry Symposium, Vancouver, Canada.
13. Magenes G., Penna A., Senaldi I., Rota M., Galasco A. (2013). Seismic response of a full scale unreinforced stone masonry building with stiffened diaphragms, Proceedings International Conference on Rehabilitation and Restoration of structures, Chennai, India.
14. Morandi P., Albanesi L., Magenes G. (2013). In-plane experimental response of masonry walls with thin shell and web clay units, Proc. of the Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics & 13. D-A-CH Tagung, 28-30 August 2013, Vienna, Austria.
15. Morandi P., Magenes G., Albanesi L. (2013). Mechanical characterization of different typologies of masonry made with thin shell/web clay units Proc. of the 12th Canadian Masonry Symposium, 02-05 June 2013, Vancouver, Canada.
16. Nazarian S., Lai C.G., Loizos A., Gomes-Correia A. (2013). Evaluation of Subsurface Sensing Devices as Related to Pavement Geotechnique. Proceedings 18th International Conference on Soil Mechanics and Geotechnical Engineering -18th ICSMGE. Challenges and Innovations in Geotechnics. September 2-6, 2013, Paris, France.
17. Peloso S., Beyer K., Pavese A., Tondelli M (2013). Dynamic Testing of a Mixed RC-URM Building. Proceedings of the 5th International Conference on Advances in Experimental Structural Engineering, 2013, Taipei, Taiwan.
18. Penna A. (2013). Seismic assessment and strengthening of stone masonry buildings: recent experimental results, analysis methods and code procedures. In: Adam C., Heuer R., Lehnardt W., Schran C. Proceedings Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013). Vienna, Austria.
19. Penna A., Galasco A. (2013). A macro-element model for the nonlinear analysis of masonry members including second order effects. In: Papadrakakis M., Papadopoulos V., Plevris V.. Proceedings 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2013). Kos Island, Grecia.
20. Penna A., Mouyiannou A., Rota M., Magenes G. (2013). Issues on the use of time-history analysis for the design and assessment of masonry structures. In: Papadrakakis M., Papadopoulos V., Plevris V. Proceedings 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2013). Kos Island, Grecia.
21. Penna A., Rota M., Mouyiannou A., Graziotti F., Magenes G. (2013). An analytical procedure for the derivation of state-dependent fragility curves for masonry buildings. In: Adam C., Heuer R., Lehnardt W., Schran C. Proceedings Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013), Vienna, Austria.
22. Roldan R., Sullivan T.J., Della Corte G. (2013). A comparison of force-based and displacement-based seismic design solutions for a MRF building, Proceedings of the XXIV CTA Conference, Turin, Italy, pp.573-580.
23. Rosti A., Penna A., Rota M., Magenes G. (2013). In-plane cyclic testing of low-density AAC masonry walls, Proceedings 12th Canadian Masonry Symposium, Vancouver, Canada.
24. Rota M., Bracchi S., Penna A., Magenes G. (2013). Evaluation of the effect of modelling uncertainties on the seismic response of existing masonry buildings, In: Papadrakakis M., Papadopoulos V., Plevris V.. Proceedings 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2013). Kos Island, Grecia.
25. Sullivan T.J. (2013). Simplified Displacement-Based Seismic Design of Regular RC Frame Buildings, Proceedings of the XV Convegno L Ingegneria Sismica in Italia, ANIDIS 2013, Padova, Italy.
26. Sullivan T.J., Calvi G.M. (2013). Towards displacement-based seismic assessment in Europe, Proceedings 2013 New Zealand Society of Earthquake Engineering conference, Wellington, New Zealand.
27. Sullivan T.J., Calvi G.M., Welch D.P. (2013). Estimating roof level acceleration spectra for single storey buildings, Proceedings 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2013, Kos, Greece.
28. Tondelli M., Petry S., Beyer K., Peloso S. (2013). Shake table test on a four-storey structure with reinforced concrete and unreinforced masonry walls. Proceedings of the Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013, Vienna (AU).
29. Tondelli M., Petry S., Lanese I., Beyer K., Peloso S. (2013). Shake table testing of a half scaled RC-URM walls structure. Proceedings of the SERIES Concluding Workshop – Joint with US-NEES, Earthquake Engineering Research Infrastructures, May 2013, Ispra (IT).
30. Weatherill G., Danciu L., Crowley H. (2013). Future directions for seismic input in European design codes in the context of the seismic hazard harmonization in Europe (SHARE). project, Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013), Paper no. 494.
31. Weatherill G., Silva V., Crowley H.,Bazzurro P. (2013). Exploring Strategies for Portfolio Analysis in Probabilistic Seismic Loss Estimation, Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013), Paper no. 303.
32. Welch D.P., Sullivan T.J. (2013). Influence of Structural and Fragility Modeling Decisions in the Probabilistic Loss Assessment of RC Frame Buildings, Proceedings 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2013, Kos, Greece.
33. Welch D.P., Sullivan T.J. (2013). Non-structural considerations for the seismic serviceability performance in European steel moment frames, Proceedings of the XXIV CTA Conference, Turin, Italy, pp. 581-588.

 

Articoli conferenze nazionali

1. Andreotti G., Lai C.G., Bozzoni F., Scandella L. (2013). New soil factors for NTC08 derived from 1D fully stochastic ground response analyses. Proceedings of the Italian National Association of Earthquake Engineering (ANIDIS 2013). Padova, Italy, July 1-4, 2013.
2. Borzi B., Ceresa P., Nucera F., Santini A., Sofi A., Tripodi E. (2013). Vulnerabilità sismica di edifici in muratura confinata, Atti del XV Convegno L’Ingegneria Sismica in Italia ANIDIS 2013, ISBN: 978-88-97385-59-2, 30 Giugno-4 Luglio, Padova.
3. Bracchi S., Rota M., Penna A., Magenes G. (2013). Effetto delle incertezze di modellazione sulla valutazione della risposta sismica di edifici in muratura, Atti del XV Convegno Nazionale L’Ingegneria sismica in Italia, Padova.
4. Dolce M., Goretti A., Pavese A., Casarotti C., Ponticelli L., Bolognese C. (2013). DrHouse Project. The Patras, Greece, exercise of the Build-Safe macromodule, L’Ingegneria Sismica in Italia (ANIDIS 2013), June 30, July 04, 2013, Padova (Italy).
5. Graziotti F., Magenes G., Penna A., Galasco A. (2013). Modello numerico semplificato ad un grado di libertà per l’interpretazione del comportamento dinamico di strutture in muratura, Atti del XV Convegno Nazionale L’Ingegneria sismica in Italia, Padova.
6. Magenes G., Penna A., Senaldi I., Rota M., Galasco A. (2013). Effetti di irrigidimento dei solai sulla risposta sismica di edifici in muratura di pietra, Atti del XV Convegno Nazionale L’Ingegneria sismica in Italia, Padova.
7. Morandi P., Hak S., Magenes G. (2013). Simplified Out-of-plane Resistance Verification for Slender Clay Masonry Infills in RC Frames, Atti del XV Convegno ANIDIS -L’ingegneria Sismica in Italia; 30 Giugno -4 Luglio 2013, Padova, Italy.
8. Morandi P., Magenes G., Albanesi L. (2013). Prove sperimentali per la valutazione della risposta sismica nel piano di pareti murarie in blocchi di laterizio a setti sottili, Atti del XV Convegno ANIDIS -L’ingegneria Sismica in Italia; 30 Giugno -4 Luglio 2013, Padova, Italy.
9. Sabetta F., Speranza E., Borzi B., Faravelli M. (2013). Scenari di danno empirici e analitici a confronto con recenti terremoti italiani, Atti del 32esimo Convegno Nazionale GNGTS 2013, Trieste.
10. Trianni S.C.T., Lai C.G., Pasqualini E. (2013). Probabilistic Seismic Hazard Assessment at a Strategic Site in the Bay of Bengal. Proceedings of the Italian National Association of Earthquake Engineering (ANIDIS 2013). Padova, Italy, July 1-4, 2013.

 

Rapporti di ricerca

1. Belleri A., Bellotti D., Nascimbene R., Riva P. (2013). Vulnerabilità riscontrate negli edifici industriali colpiti dal sisma del maggio 2012, Precast Design, Vol. 2, pp. 16, 2013.
2. Broglio S., Crowley H., Pinho R. (2013). Bayesian Network Framework for Macro-Scale Seismic-Risk Assessment and Decision Support for Bridges, Research Report UME, 2013/02.
3. Maley T.J., Sullivan. T.J., Lago A., Roldan R., Calvi G.M. (2013). Characterising the Seismic Behaviour of Steel MRF Structures , IUSS Press, Research Report Eucentre 2013/02, ISBN 978-88-6198-089-1, 172 pages.
4. Monti A. (2013). contribution to drafting of the report OECD/APEC (Asia Pacific Economic Coooperation). on Disaster Risk Financing, endorsed on 19 September 2013 by APEC Finance Ministers and published on such date: http://www.oecd.org/daf/fin/insurance/OECD_APEC _DisasterRiskFinancing.pdf, http://www.oecd.org/daf/fin/ insurance/disaster riskfinancinginap ececonomies.htm
5. Sullivan. T.J., Calvi G.M. Editors (2013). Developments in the field of displacement-based seismic assessment, IUSS Press, ROSE Report ROSE 2013/01, ISBN 978-88-6198-090-7, 531pages.

Articoli su rivista internazionale

1. Almeida J.P., Das S., Pinho R. (2012). Adaptive force-based frame element for regularized softening response, Computers and Structures, Vol. 102-103, pp. 1-13.
2. Argente dos Santos H. A. F., Auricchio F., and Conti. M. (2012). Fatigue life assessment of cardiovascular balloon-expandable stents: A two-scale plasticity-damage model approach, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 15, pp. 78-92.
3. Auricchio F., Beirao da Veiga L., Hughes T. J. R., Reali A., and Sangalli G. (2012). Isogeometric collocation for elastostatics and explicit dynamics, Computer Methods in Applied Mechanics and Engineering, Vol. 249-252, pp. 2-14.
4. Auricchio F., Calabrò F., Hughes T. J. R., Reali A., and Sangalli G. (2012). A Simple Algorithm for Obtaining Nearly Optimal Quadrature Rules for NURBS-based Isogeometric Analysis, Computer Methods in Applied Mechanics and Engineering, doi:10.1016/j.cma.2012.04.014.
5. Auricchio F., Conti M., Ferrara A., Morganti S., and Reali A. (2012). Patient-specific simulation of a stentless aortic valve implant: the impact of fibers on leaflet performance, Computer Methods in Biomechanics and Biomedical Engineering, doi:10.1080/10255842.2012.681645.
6. Auricchio F., Conti M., Ferrara A., Morganti S., and Reali A. (2012). Patient-specific finite element analysis of carotid artery stenting: a focus on vessel modeling, International Journal for Numerical Methods in Biomedical Engineering, doi: 10.1002/cnm.2511.
7. Auricchio F., Conti M., Ferraro M., and Reali A. (2012). Evaluation of carotid stent scaffolding through patient-specific finite element analysis, International Journal for Numerical Methods in Biomedical Engineering, Vol. 28, pp. 1043-1055.
8. Auricchio F., Ferrara A., and Morganti S. (2012). Comparison and critical analysis of invariant-based models with respect to their ability in fitting human aortic valve data, Annals of Solid and Structural Mechanics, Vol. 4, pp. 1-14.
9. Beirao da Veiga L., Lovadina C., and Reali A. (2012). Avoiding shear locking for the Timoshenko beam problem via isogeometric collocation methods, Computer Methods in Applied Mechanics and Engineering, Vol. 241-244, pp. 38-51.
10. Bozzoni F., Lai C.G., and Scandella, L. (2012). 2012 Emilia Earthquakes: Preliminary Results of Ground-Motion Characteristics, Annals of Geophysics, Vol. 55, No. 4, DOI: 10.4401/ag-6121.
11. Ceballos, J.L., Sullivan, T.J. (2012). Development of improved inelastic displacement prediction equations for the seismic design of hybrid systems, Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 45 No.1, pp. 1-14.
12. Ceresa P., Brezzi F., Calvi G.M., Pinho R. (2012). Analytical modelling of a large-scale dynamic testing facility, Earthquake Engineering and Structural Dynamics, Vol. 41, Issue 2, pp. 255-277.
13. Corigliano M., Lai C.G., Menon A., and Ornthammarath T. (2012). Seismic Input at the Archaeological Site of Kancheepuram in Southern India, Natural Hazards, Vol. 63, pp. 845-866, DOI 10.1007/s11069-012-0195-4.
14. Corigliano M., Lai C.G., Rota M., and Strobbia C. (2012). ASCONA: Automated Selection of COmpatible Natural Accelerograms, Earthquake Spectra, Vol. 28, No. 3, pp. 1-23.
15. Cossu, R., Dell’Acqua, F., Polli, D.A., Rogolino, G. (2012). SAR-based seismic damage assessment in urban areas: Scaling down resolution, scaling up computational performance, IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 5 (4), art. no. 6165675, pp. 1110-1117.
16. Curone D., Secco E.L., Caldani L., Lanatà A., Paradiso R., Tognetti A., Magenes G. (2012). Assessment of Sensing Fire Fighters Uniforms for Physiological parameter Measurement in Harsh Environment, IEEE Transactions on Information Technology in Biomedicine, Vol. 16, No. 3, pp. 501-511.
17. Curone D., Secco E.L., Tognetti A., Magenes G. (2012). An Activity Classifier based on Heart rate and Accelerometer Data Fusion, International Journal of Bioelectromagnetism, Vol. 15, No. 1, pp. 7 – 12, 2013.
18. Dell’Acqua, F., Gamba, P., Jaiswal, K. (2012). Spatial aspects of building and population exposure data and their implications for global earthquake exposure modelling, Natural Hazards, pp. 1-19.
19. Dell’Acqua, F., Lanese, I., Polli, D.A. (2012). Integration of EO-based vulnerability estimation into EO-based seismic damage assessment: a case study on L’Aquila, Italy, 2009 earthquake, Natural Hazards, pp. 1-16. Article in Press.
20. Dell’Acqua, F.; Gamba, P.; (2012), Remote Sensing and Earthquake Damage Assessment: Experiences, Limits, and Perspectives, Proceedings of the IEEE, vol.100, no.10, pp. 2876-2890, Oct. 2012. doi: 10.1109/JPROC.2012.2196404.
21. Hak, S., Morandi, P. Magenes, G., Sullivan, T.J. (2012) Damage Control for Clay Masonry Infills in the Design of RC Frame Structures, Journal of Earthquake Engineering, Vol.16, sup1, pp. 1-35.
22. Lai C.G., Crempien de la Carrera J.G.F. (2012). Stable Inversion of Measured VP and VS to Estimate Porosity in Fluid-Saturated Soils, Géotechnique, Vol. 62, No. 4, pp. 359-364.
23. Lisini, G.; Gamba, P.; Dell’Acqua, F. (2012). A novel extension of the anisotropic rotation-invariant built-up presence index to SAR data, European Journal of Remote Sensing, 45, 189-199, 2012.
24. Monti A. (2012). Cutting Across Linguistic and Regulatory Divides: on Covered Credit Default Swaps and Insurance, Uniform Law Review, vol. XVII, p. 425-447.
25. Monti A., Castellano G. (2012). Editorial – Multilingualism in Financial Markets Governance: the Role of Language in the Process of International Regulatory Convergence, Uniform Law Review, vol. XVII, p. 403-406.
26. Pinho R. (2012). Discussion of Comparison of base shears estimated from floor accelerations and column shears, Earthquake Spectra, Vol. 28(2), pp 1-2.
27. Rota M., Zuccolo E., Taverna L., Corigliano M., Lai C.G., and Penna A. (2012). Mesozonation of Italian Territory for Definition of Compatible Accelerograms, Bulletin of Earthquake Engineering, DOI 10.1007/s10518-012-9369-4.
28. Santagati S., Bolognini D., and Nascimbene R. (2012). Strain life analysis at low cycle fatigue on concentrically braced steel structures with RHS shape braces, Journal of Earthquake Engineering, Vol. 16(S1), pp. 107-137.
29. Secco E.L., Curone D., Tognetti A., Bonfiglio A., Magenes G. (2012). Validation of Smart Garments for Physiological and Activity-Related Monitoring of Humans in Harsh Environment, American Journal of Biomedical Engineering, Vol. 2, No. 4, pp. 189-196.
30. Sullivan, T.J. and Lago, A. (2012) Towards a simplified Direct DBD procedure for the seismic design of moment resisting frames with viscous dampers Engineering Structures, Vol. 35 pp. 140-148.
31. Tarque N., Crowley H., Pinho R., Varum H. (2012). Displacement-based fragility curves for seismic assessment of adobe buildings in Cusco, Peru, Earthquake Spectra, Vol. 28(2), pp. 759-794.
32. Thomopoulos C., Lai C.G. (2012). Preliminary Definition of Fragility Curves for Pile-Supported Wharves, Journal of Earthquake Engineering, Vol. 16, Supplement 1, pp. 83-106.
33. Totaro P., Morganti S., Ngo Yon C. L., Dore R., Conti M., Auricchio F., and Viganò M. (2012). Computational Finite Element Analyses to Optimize Graft Sizing During Aortic Valve-Sparing Procedure, The Journal of Heart Valve Disease, Vol. 21, pp. 141-147.

 

Articoli su rivista nazionale

1. Belleri A., Riva P., Nascimbene R. (2012). Comportamento sismico e attività di messa in sicurezza di edifici industriali, Progettazione Sismica, No. 3, pp. 131-139.
2. Borzi B., Germagnoli F., Faravelli M., Onida M., Pagano M., Polli D., Ceresa P., Calvi G.M., Zinno L., Siviglia S., Iiritano G., Mauro L. (2012). Sistema Informatico Edilizia Regione Calabria (SI-ERC), Progettazione Sismica, No. 2, pp. 121-131.
3. Bozzoni F., Lai C.G., and Martinelli M. (2012). Liquefazione: confronto tra effetti osservati e valutazioni preliminari della suscettibilità, Progettazione Sismica, No. 3-2012, pp. 95-108.
4. Nascimbene R., Fagà E., Cigada A., Vanali M., Moratti M., Pinho R., Calvi G.M. (2012). Realizzazione di un ponteggio metallico per la Gran Guglia del Duomo di Milano: analisi, modellazione, verifica ed identificazione dinamica, Progettazione Sismica, No. 1, pp. 15-34.

 

Libri

1. Monti A. (2012). Il Danno Catastrofale. Strumenti Giuridici e Modelli Istituzionali per la Gestione dei Rischi Estremi, Pavia, Iuss Press.
2. Sullivan. T.J. Priestley, M.J.N., and Calvi, G.M. Editors (2012) A model code for the Displacement-Based Seismic Design of Structures, DBD12, IUSS Press, ISBN 978-88-6198-072-3, 105pages.

 

Capitoli di libro

1. Aydınoğlu M.N., Fischinger M., Isaković T., Kappos A.J., Pinho R. (2012). Methods for inelastic analysis of bridges, in Seismic Design and Assessment of Bridges, A.J. Kappos, M. Saiid Saiidi, M.N. Aydınoğlu, T. Isaković (Eds.), Springer, Dordrecht, The Netherlands.
2. Isaković T., Arêde A., Cardone D., Delgado P., Fischinger M., Kappos A.J., Pouca N.V., Pinho R., Sextos A. (2012). Case studies and comparative evaluation of methods, in Seismic Design and Assessment of Bridges, A.J. Kappos, M. Saiid Saiidi, M.N. Aydınoğlu, T. Isaković (Eds.), Springer, Dordrecht, The Netherlands.
3. Monti A., Borgo A. (2012). I contratti assicurativi telematici, in La tutela dei consumatori in Internet e nel commercio elettronico. Contratti – Responsabilità – Rimedi, Tomo II, p. 551-593, Milano: Giuffrè.
4. Saiid Saiidi M., Arêde A., Cardone D., Delgado P., Dolce M., Fischinger M., Isaković T., Pantazopoulou S., Pekcan G., Pinho R., Sextos A. (2012). Modelling of bridges for inelastic analysis, in Seismic Design and Assessment of Bridges, A.J. Kappos, M. Saiid Saiidi, M.N. Aydınoğlu, T. Isaković (Eds.), Springer, Dordrecht, The Netherlands.

  

Articoli conferenze internazionali

1. Agha Beigi, H.H., Sullivan, T.J., Calvi, G.M., Christopoulos, C. (2012). Characteristics Affecting the Vulnerability of Soft Storey Mechanisms, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 4105.
2. Ahmad N., Ali Q., Crowley H., Pinho R. (2012), “Earthquake loss estimation of structures in Pakistan,” Proceedings of the 9th International Conference on Urban Earthquake Engineering/4th Asia Conference on Earthquake Engineering, Tokyo, Japan.
3. Alaee A.M., Sullivan T., Rogers C., Nascimbene R. (2012). Semi-empirical method to predict the displacement capacity and resistance of cold-formed steel frame wood-panel shear walls, 12th World Conference on Timber Engineering, WCTE 2012, Auckland, New Zealand.
4. Almeida, J.P., Das, S., Pinho, R. (2012). RC frame analysis with a new damage-following model, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, Paper no. 5079.
5. Auricchio F., Beirao da Veiga L., Hughes T., Reali A., and Sangalli G. (2012). Isogeometric collocation methods for elasticity, 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
6. Auricchio F., Beirao da Veiga L., Lovadina C., Reali A., Taylor R.L., Wriggers P. (2012). Approximations of incompressible large deformation elastic problems: some unresolved issues!, 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
7. Auricchio F., Bonetti E., Scalet G., and Ubertini F. (2012). Refined shape memory alloys model taking into account martensite reorientation, Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
8. Auricchio F., Calabrò F., Hughes T., Reali A., Sangalli G. (2012). Quadrature rules for NURBS-based isogeometric analysis, 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
9. Auricchio F., Conti M., Ferraro M., and Reali A. (2012). Evaluation of carotid stent scaffolding through patient-specific finite element analysis, Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
10. Auricchio F., Hartmann S., Hughes T., Morganti S., and Reali A. (2012). An isogeometric analysis approach to model the aortic valve behavior, 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
11. Auricchio F., Lefieux A., Boffi D., Gastaldi L., and Reali A. (2012). Some issues in unfitted methods and possible solutions: with applications to fluid dynamics problems, 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
12. Balduzzi G., Auricchio F., and Lovadina C. (2012). Mixed 3D beam models: differential-equations derivation and finite-element solutions, Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
13. Borzi B., Ceresa P., Faravelli M., Onida M. (2012). Vulnerability study of steel storage tanks in a large industrial area of Sicily, Proceedings of 15th Word Conference on Earthquake Engineering, Lisbon, Portugal.
14. Borzi B., Ceresa P., Faravelli M., Onida M. (2012). Vulnerability study of steel storage tanks in a large industrial area of Sicily, Proceedings of 7th International Conference on Behaviour of Steel Structures in Seismic Areas, Santiago, Chile.
15. Bournas, D.A.,Torrisi, G.S., Crisafulli F.J., Pavese, A. (2012). Experimental Investigation and Analytical Modeling of Prefabricated Reinforced Concrete Sandwich Panels, Proc. Of 15th World Conference On Earthquake Engineering (15 WCEE 2012). Lisbon, sept 2012, 0574.
16. Bozzoni F., Lai C.G. (2012). Seismic Risk Assessment of Italian Seaports Using GIS Technology: the Ports of the Calabria Region, Proceedings of the 15WCEE, 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
17. Bozzoni F., Lai C.G., and Bianchi A. (2012). Application of GIS Technology to Seismic Risk Assessment of Calabrian Seaports in Italy, Proceedings of the II MEDDAYS, 2nd Mediterranean Days of Coastal and Port Engineering – Infrastructures, Logistics and Sustainability, Valencia, Spain.
18. Broglio S., Crowley H., Pinho R. (2012). Bayesian Network Framework for Macro-Scale Seismic Risk Assessment and Decision Making for Bridges, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, Paper no. 3267.
19. Brunesi E., Bolognini D., and Nascimbene R. (2012). Evaluation of the Shear Strength Capacity of Precast-Prestressed Hollow Core Floor Slabs – Part 2: Code Comparisons and Design Method, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal.
20. Calabrese A., Lai C.G. (2012). A Neural Network Approach to Performance-Based Seismic Design of Blockwork Wharves, Proceedings of the II PBD, 2nd International Conference on Performance-Based Design in Earthquake Geotechnical Engineering, Taormina, Italy.
21. Calabrese A., Lai C.G. (2012). Seismic Vulnerability Analysis of Wharf Structures Using Artificial Neural Networks, Proceedings of the 15WCEE, 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
22. Casarotti C., Pavese A. (2012). DRHOUSE project: the ASA module for the post earthquake structural assessment, in 4th International Disaster and Risk Conference IDRC Davos 2012.
23. Ceresa P., Borzi B., Noto F., Onida M. (2012). Application of a probabilistic mechanics-based methodology for the seismic risk assessment of the Italian RC bridges, Proceedings of 15th Word Conference on Earthquake Engineering, Lisbon, Portugal.
24. Ceresa P., Fiorini E., Borzi B. (2012). Effects of the seismic input variability on the seismic risk assessment of the RC bridges, Proceedings of 15th Word Conference on Earthquake Engineering, Lisbon, Portugal.
25. Chiorino M.A., Ceravolo R., Lai C.G., Casalegno C. (2012). Survey, Seismic Input and Structural Modeling of the ‘Regina Montis Regalis’ Basilica and Large Elliptical Dome at Vifoforte, Northern Italy, Proceedings of the SAHC 2012, 8th International Conference on Structural Analysis of Historical Constructions, Wroclaw, Poland.
26. Conti M., Auricchio F., and Reali A. (2012). Carotid Artery Stenting simulation: from medical images to finite element analysis, Proceedings of the first ECCOMAS Young Investigators Conference, Aveiro, Portugal.
27. Corigliano M., Lai C.G., Rota M., Penna A. (2012). Automatic Definition of Hazard-Compatible Accelerograms at Non-Rocky Sites, Proceedings of the 15WCEE, 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
28. Correia A.A., Pecker A., Kramer S.L., Pinho R. (2012). A pile-head macro-element approach to seismic design of extended pile-shaft-supported bridges, Proceedings of the 2nd International Conference on Performance-Based Design in Earthquake Geotechnical Engineering (2ICPBDEGE), Taormina, Italy, Paper No. 7.03.
29. Correia A.A., Pecker A., Kramer S.L., Pinho R. (2012). Nonlinear pile-head macro-element model: SSI effects on the seismic response of a monoshaft-supported bridge, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, Paper No. 5527.
30. Cossu, R., Dell’Acqua, F., Polli, D.A., Rogolino, G. (2012). Urban seismic damage assessment from post-event only SAR: preliminary tests on Envisat ASAR data, Synthetic Aperture Radar, 2012. EUSAR, 9th European Conference on, 51-53,2012,VDE.
31. Crowley H., Silva V., Bal I.E., Pinho R. (2012). Calibration of Seismic Design Codes using Loss Estimation, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, Paper no. 4891.
32. Curone D., Secco E.L., Tognetti A., Magenes G. (2012). An Activity Classifier based on Heart rate and Accelerometer Data Fusion, Proceedings of the 7th International Workshop on Biosignal Interpretation, Como, Italy.
33. Dell’Acqua, F., Lanese, I., Polli, D.A., Gamba, P. (2012). Is physical vulnerability helpful in SAR-based seismic damage assessment? A preliminary study, Proceedings of the 2012 Tyrrhenian Workshop on Advances in Radar and Remote Sensing: From Earth Observation to Homeland Security, TyWRRS 2012, art. no. 6381099, pp. 36-40.
34. Dolce M., Goretti A., Pavese A., Ponticelli L., (2012). The Build-Safe Macromodule of the DrHouse Project, Proc. Of 15th World Conference On Earthquake Engineering (15 WCEE 2012). Lisbon, sept 2012.
35. Fagà E., Rassati G.A., Nascimbene R. (2012). Seismic design of elevated steel tanks with concentrically braced supporting frames, Structures 2012 Congress, Chicago.
36. Fioravante V., Giretti D., Prearo C., Lai C.G. (2012). Static and Dynamic Centrifuge Modeling of Landslide Stabilization with Large-Diameter Shafts, Proceedings of the 15WCEE, 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
37. Fiorini E., Borzi B., Iaccino R. (2012). Real Time damage scenario: case study for the L’Aquila Earthquake, Proceedings of 15th Word Conference on Earthquake Engineering, Lisbon, Portugal.
38. Furinghetti M., Casarotti C., Pavese A. (2012). Effects of bi-directional motion on a structural system isolated with DCSS devices with laying defects, in 15th World Conference On Earthquake Engineering (15 WCEE 2012). Lisbon, sept 2012, 5748.
39. Haslinger F., Pinho R., Keller N., Pagani M., Crowley H., Burton, C. (2012), “Risk communication in the context of the Global Earthquake Model”, Proceedings from the European Seismological Commision General Assesmbly, Moscow, Russia.
40. Kiendl J., Bletzinger K., Wüchner R., Bazilevs Y., and Reali A. (2012). Isogeometric analysis for thin-walled structures – beams, plates, shells, 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.
41. Kiendl J., Wuchner R., Bletzinger K.U., and Reali A. (2012). Isogeometric Shell Analysis and Shape Optimization, Proceedings of the first ECCOMAS Young Investigators Conference, Aveiro, Portugal.
42. Kohrangi, M., Sullivan, T.J., Calvi, G.M. (2012). Seismic Assessment of a 15-Story Building Damaged in the Chile Earthquake of February 27th 2010, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 2840.
43. Lago, A., Sullivan, T.J., Calvi, G.M. (2012). Deformed Shapes of Structures equipped with Viscous Dampers, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 2652.
44. Lai C.G., Özcebe A.G. (2012). In-Situ Measurement of Damping Ratio Spectra from the Inversion of Phase Velocities of P and S Waves in Cross-Hole Seismic Testing, Proceedings of the IS-Hokkaido 2012, 2nd International Conference on Transportation Geotechnics, Sapporo, Japan.
45. Lissia S, Casarotti C, Pavese A, Dacarro F (2012). Experimental Response of Full Scale Curved Surface Sliders equipped with high dissipation sliding material, in 15th World Conference On Earthquake Engineering (15 WCEE 2012). Lisbon, sept 2012, 5746.
46. Lunghi, F., Pavese, A., Peloso, S., Lanese, I., Silvestri, D. (2012). Computer Vision System for advanced high precision displacement measurements, in Role of Seismic Testing Facilities in Performance-Based Earthquake Engineering: SERIES Workshop. Geotechnical, Geological And Earthquake Engineering, vol. 22, p. 159-176, Springer, ISSN: 1573-6059, doi: 10.1007/978-94-007-1977-4_4.
47. Maley, T.J., Sullivan, T.J., Pampanin, S. (2012). Issues with the seismic design of mixed MRF Systems, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 4043.
48. Miglietta P., Ceresa P., Iaccino R., Borzi B. (2012). Accounting for progressive damage in large scale seismic risk assessment of RC buildings, Proceedings of 15th Word Conference on Earthquake Engineering, Lisbon, Portugal.
49. Moayed Alaee S.A., Sullivan, T.J., Rogers, C.A., Nascimbene, R. (2012) Semi-empirical method to predict the displacement capacity and resistance of cold-formed steel wood panel shear walls, Proceedings of the World Conference on Timber Engineering, 16-19 July, 2012, Auckland, New Zealand, paper No.269.
50. Monelli, D., Pagani, M., Weatherill, G. A. (2012), “The hazard component of OpenQuake: the calculation engine of the Global Earthquake Model”, Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper n. 4180.
51. Özcebe A.G., Lai C.G., Fioravante V., Giretti D., Prearo C. (2012). Finite Difference Modeling of Slope Stabilization with Large Diameter Shafts, Proceedings of the 10th International Congress on Advances in Civil Engineering, Ankara, Turkey.
52. Özcebe A.G., Lai C.G., Fioravante V., Giretti D., Prearo C. (2012). Numerical and Physical Modeling of Slope Stabilization with Large Diameter Shafts, Proceedings of the 15WCEE, 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
53. Palmieri M., Magenes G., Lai C.G., Penna A., Bozzoni F., Rota M., Macchi G., Auricchio F., Mangriotis M.D., Menon A., Meher-Prasad A., Murty C.V.R (2012). Reduction of Seismic Risk of Roman and Hindu Temples, Proceedings of the SAHC 2012, 8th International Conference on Structural Analysis of Historical Constructions, Wroclaw, Poland.
54. Peloso S., Fort V., Pavese A. (2012). Calibration of the numerical model of a timber structure, in 15th World Conference On Earthquake Engineering (15 WCEE 2012). Lisbon, sept 2012, 4065.
55. Peloso S., Pavese A., Casarotti C. (2012). Eucentre TREES Lab: Laboratory for Training and Research in Earthquake Engineering and Seismology, in Role of Seismic Testing Facilities in Performance-Based Earthquake Engineering: SERIES Workshop. Geotechnical, Geological And Earthquake Engineering, vol. 22, p. 65-81, Springer, ISSN: 1573-6059, doi: 10.1007/978-94-007-1977-4_4.
56. Peloso S., Zanardi A., Pavese A. (2012). Improvement of a simplified method for the assessment of 3D R.C. frames, in 15th World Conference On Earthquake Engineering (15 WCEE 2012). Lisbon, sept 2012, 4055.
57. Pennucci, D., Sullivan, T.J., Calvi, G.M. (2012) Prediction of Higher-Mode Response of Tall RC Wall Buildings, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 5312.
58. Pinho, R. (2012). GEM: A Participatory Framework for Open, State-of-the-Art Models and Tools for Earthquake Risk Assessment, Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper n. 4929.
59. Roldan Abellan, R.R., Sullivan, T.J., Pampanin, S. (2012) Adapting DDBD for the design of Frame-Wall Structures with Hybrid-Rocking Joints, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 2716.
60. Sanchez-Lizarraga H., Lai C.G. (2012). Effect of Spatial Variability of Soil Properties on the Seismic Response of Earth Dams, Proceedings of the 15WCEE, 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
61. Santagati S., Bellotti D., Bolognini D., Brunesi E. (2012). Seismic Response Comparisons between RC Precast Structures with Dissipation Devices on Beam-Column Connections, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal.
62. Scodeggio A., Monteiro R., Dacarro F., Crowley H., Pinho R. (2012). Finite Element Model Updating of Buildings using Dynamic Identification Measurements, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, Paper no. 1331.
63. Silva V., Crowley H., Pagani M., Pinho R., Monelli D. (2012). Development and Application of OpenQuake, an Open Source Software for Seismic Risk Assessment, Proceedings of the 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, Paper no. 4923.
64. Silva V., Crowley H., Pinho R., Varum H. (2012). Development of an open-source platform for calculating losses from earthquakes, Proceedings of the European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference, Aveiro, Portugal.
65. Silva V., Varum H., Crowley H., Pinho R. (2012). Extending Displacement-Based Earthquake Loss Assessment (DBELA) for the Computation of Fragility Curves, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, Paper no. 4909.
66. Silva V., Varum H., Crowley H., Sousa R., Pinho R. (2012). Evaluation of Analytical Methodologies to Derive Vulnerability Functions, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal, Paper no. 4917.
67. Sousa R., Kazantzidou-Firtinidou D., Sousa L., Kohrangi M., Eroglu T., Pinho R., and Nascimbene R. (2012). Reliability of Nonlinear Static Analysis for Seismic Assessment of Irregular RC Buildings, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal.
68. Sousa R., Kazantzidou-Firtinidou D., Sousa L., Kohrangi M., Eroglu T., Pinho R., and Nascimbene R. (2012). Effect of different modelling assumptions on the seismic response of RC structures, 15th World Conference on Earthquake Engineering, WCEE 2012, Lisbon, Portugal.
69. Sullivan, T.J. (2012). Formulation of a direct displacement-based design procedure for steel eccentrically braced frame structures, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 2121.
70. Sullivan, T.J., Bono, F., Magni, F., Calvi, G.M. (2012). Formulation of a direct displacement-based design procedure for steel eccentrically braced frame structures, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 4135.
71. Sullivan, T.J., Lago, A., Calvi, G.M. (2012). Benefits of Vertically Distributed Isolation Devices for an 8-storey Structure with Complex Geometry, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 3695.
72. Torrisi, G. S., Crisafulli F.J., Pavese, A., (2012). An innovative Model for the In-Plane Nonlinear Analysis of Confined Masonry and Infilled Frame Structures, Proc. Of 15th World Conference On Earthquake Engineering (15 WCEE 2012). Lisbon, sept 2012, 0574.
73. Weatherill, G. A., Pagani, M., Monelli, D. (2012), “The Hazard Component of the GEM Modeller’s Toolkit: A Framework for the Preparation and Analysis of Probabilistic Seismic Hazard (PSHA) Input Tools”. Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper n. 2316.
74. Welch, D.P., Sullivan, T.J., Calvi, G.M. (2012). Towards a Direct Displacement-Based Loss Assessment Methodology for RC Frame Buildings, Proceedings 15th World Conference on Earthquake Engineering, Lisbon, Portugal, paper 4054.
75. Zuccolo E., Rota M., Lai C.G., Taverna L., Corigliano M., Penna A. (2012). Definition of Spectrum-Compatible Natural Records for the Italian Territory, Proceedings of the 15WCEE, 15th World Conference on Earthquake Engineering, Lisbon, Portugal.

 

Articoli conferenze nazionali

1. Correia A.A., Pecker A., Kramer S.L., Pinho R. (2012). An innovative pile-head macro-element model for seismic analysis of pile/column supports, Proceedings of the 3rd Portuguese Young Geotechnicians Conference (3EJG), Lisbon, Portugal.
2. Santagati S., Bellotti D., Brunesi E., Bolognini D., Nascimbene R. (2012). Tecniche Avanzate di Protezione Sismica di Strutture Prefabbricate in Calcestruzzo Armato, Workshop I Collegamenti nelle Strutture Prefabbricate – Connections in Precast Structures, Università degli Studi di Bergamo – ACI Italy Chapter, Dalmine, Italy.
3. Stucchi M., Gomez Capera A.A., Garcia Pelaez J., Albini P., Pinho R. (2012). The GEM project – Tools for compiling the Global Earthquake History: Initiatives in the Americas, Proceedings of the 4th International Conference on Hazard, Geological Risk, Earthquake Engineering and Disasters, Santiago de Cuba, Cuba.

 

Rapporti di ricerca

1. Calabrese A., Lai C.G. (2012). Performance-Based Seismic Design and Fragility Evaluation of Blockwork Wharf Structures, Research Report ROSE2012/01, IUSS Press, Pavia, Italy, 303 pages.
2. Lai C.G., Bozzoni F., Zuccolo E., Salazar W., Corigliano M., Scandella L., Robertson R., Latchman J., Lynch L. (2012). Probabilistic Seismic Hazard Assessment in the Eastern Caribbean Islands, Research Report EUCENTRE2012/01, IUSS Press, Pavia, Italy, 239 pages.
3. Lai, C.G., Bozzoni, F., Mangriotis, M.D., and Martinelli, M. (2012). Geotechnical Aspects of May 20, 2012 M5.9 Emilia Earthquake, Italy, Report by the European Centre for Training and Research in Earthquake Engineering, EUCENTRE (Pavia, Italy). GEER Association Report No. GEER-030.
4. Monti A. (2012). Public-private initiatives to cover extreme events, in Extreme events and insurance: 2011 annus horribilis, edited by Courbage C. and Stahel W. R., The Geneva Reports. Risk and Insurance Research, vol. 5, p. 27-38, Geneva: The Geneva Association.
5. Sanchez-Lizarraga H., Lai C.G. (2012). Performance-Based Seismic Analysis and Design of Earth Dam, Research Report ROSE2012/02, IUSS Press, Pavia, Italy, 267 pages.
6. Welch, D.P., Sullivan, T.J., and Calvi, G.M. (2012). Developing Direct Displacement-Based Design and Assessment Procedures for Performance-Based Earthquake Engineering Research Report ROSE2012/03, IUSS Press, Pavia, Italy, 166 pages.

Articoli su rivista internazionale

1. Arghavani J., Auricchio F., and Naghdabadi R. (2011). A finite strain kinematic hardening constitutive model based on hencky strain: General framework, solution algorithm and application to shape memory alloys, International Journal of Plasticity, Vol. 27. No. 6, pp. 940-961.
2. Arghavani J., Auricchio F., Naghdabadi R., and Reali A. (2011). An improved, fully symmetric, finite-strain phenomenological constitutive model for shape memory alloys, Finite Elements in Analysis and Design, Vol. 47, No. 2, pp.166-174.
3. Arghavani J., Auricchio F., Naghdabadi R., and Reali A. (2011). On the robustness and efficiency of integration algorithms for a 3d finite strain phenomenological sma constitutive model International Journal for Numerical Methods in Engineering, Vol. 85, No. 1, pp. 107-134.
4. Asprone D., Auricchio F., and Reali A. (2011). Novel finite particle formulations based on projection methodologies, International Journal for Numerical Methods in Fluids, Vol. 65, No. 11-12, pp. 1376-1388.
5. Attanasi G. and Auricchio F. (2011). Innovative superelastic isolation device, Journal of Earthquake Engineering, Vol. 15 (Suppl. 1), pp. 72-89.
6. Attanasi G., Auricchio F., and Urbano M. (2011). Theoretical and experimental investigation on sma superelastic springs, Journal of Materials Engineering and Performance, vol. 20, No. 4-5, pp. 706-711.
7. Auricchio F., Bessoud A., Reali A., and Stefanelli U. (2011). A three-dimensional phenomenological model for magnetic shape memory alloys, GAMM Mitteilungen, Vol. 34, No. 1, pp. 90-96.
8. Auricchio F., Morganti S., Reali A., and Urbano M. (2011). Theoretical and experimental study of the shape memory effect of beams in bending conditions, Journal of Materials Engineering and Performance, Vol. 20, No. 4-5, pp. 712-718.
9. Auricchio F. and Scovazzi G. (2011). Numerical methods for multi-material fluids and structures (multimat-2009), International Journal for Numerical Methods in Fluids, Vol. 65, No. 11-12, pp. 1279-1280.
10. Ben Mekki, O. and Auricchio F. (2011). Performance evaluation of shape-memory alloy superelastic behavior to control a stay cable in cable-stayed bridges, International Journal of Non-Linear Mechanics, Vol. 46, No. 2, pp. 470-477.
11. Beyer K., Dazio A., Priestley M.J.N. (2011). Shear Deformations of Slender Reinforced Concrete Walls under Seismic Loading, ACI Structural Journal, V. 108, No. 2.
12. Borzi B., Dell’Acqua F., Faravelli M., Gamba P., Lisini G., Onida M., Polli D. (2011). Vulnerability study on a large industrial area using satellite remotely sensed images, Bulletin of Earthquake Engineering, No. 9, pp. 675-690.
13. Bozzoni F., Corigliano M., Lai C.G., Salazar W., Scandella L., Zuccolo E., Latchman J., Lynch L., Robertson R. (2011). Probabilistic Seismic Hazard Assessment at the Eastern Caribbean Islands, Bulletin of Seismological Society of America, Vol.101, No.5, pp. 2499-2521.
14. Ceresa P., Brezzi F., Calvi G.M., Pinho R. (2011). Analytical modelling of a large-scale dynamic testing facility, Earthquake Engineering and Structural Dynamics (published online: June 27th, 2011).
15. Corigliano M., Scandella L., Lai C.G., Paolucci R. (2011). Seismic Analysis of Deep Tunnels in Near Fault Conditions: a Case Study in Southern Italy, Bulletin of Earthquake Engineering, Vol. 9, No. 4, pp. 975-995.
16. Costa A.A., Penna A., Magenes G. (2011). Seismic performance of Autoclaved Aerated Concrete (AAC) masonry: from experimental testing of the in-plane capacity of walls to building response simulation Journal of Earthquake Engineering, Vol. 15, No. 1-31.
17. De Falco C., Reali A., and Vázquez R. (2011). Geopdes: A research tool for isogeometric analysis of pdes, Advances in Engineering Software, Vol. 42, No. 12, pp. 1020-1034.
18. Dell’Acqua F. (2011). Estimating vulnerability, GIM International, Vol.25, pp.39.
19. Dell’Acqua F., Bignami C., Chini M., Lisini G., Polli D.A., Stramondo S. (2011). Earthquake damages rapid mapping by satellite remote sensing data: L’Aquila April 6th, 2009 event, IEEE Journal of selected topics in applied earth observations and remote sensing, Vol. 4, No. 4, pp. 935-943.
20. Dell’Acqua F., Polli D.A. (2011). Post-event only VHR radar satellite data for automated damage assessment: a study on COSMO/SkyMed and the 2010 Haiti earthquake, Photogrammetric Engineering and Remote Sensing, Vol.77, pp.1037- 1043.
21. Dizhur D., Ingham J., Moon L., Griffith M., Schultz A., Senaldi I., Magenes G., Dickie J., Lissel S., Centeno J., Ventura C., Leite J., and Lourenço P. (2011) Performance of masonry buildings and churches in the 22 February 2011 Christchurch Earthquake, Bullettin of the New Zealand Society for Earthquake Engineering, Vol. 44, No. 4.
22. Fiorini E., Tibaldi A. (2011). Quaternary tectonics in the central Interandean Valley, Ecuador: Fault propagation folds, transfer faults and the Cotopaxi Volcano, Glob. Planet. Change, No. 2011.06.002.
23. Lanati M., Curone D., Secco E.L., Magenes G., Gamba P. (2011). An autonomous long range monitoring system for emergency operators, International Journal of Wireless & Mobile Networks, Vol. 3, No. 1, pp. 10-23.
24. Lanese I., Pavese A., Dacarro F. (2011), Development of Software and Hardware Architecture for Real-Time Dynamic Hybrid Testing and Application to a Base Isolated Structure, Journal of Earthquake Engineering Special Issue.
25. Menon A., Magenes G. (2011). Definition of Seismic Input for Out-of-plane Response of Masonry Walls: II Formulation, Journal of Earthquake Engineering, Vol.15, No. 2, pp. 195-213.
26. Menon A., Magenes G. (2011). Definition of Seismic Input for Out-of-plane Response of Masonry Walls: I Parametric Study, Journal of Earthquake Engineering, Vol. 15, No. 2, pp. 165-194.
27. Nascimbene R., Rassati GA.,Wijesundara K.K. (2011). Numerical simulation of gusset-plate connections with rectangular hollow section shape brace under quasi-static cyclic loading, Journal of Constructional Steel Research, Vol. 70, pp. 177-189.
28. Ornthammarath T., Douglas J., Sigbjörnsson R., Lai C.G. (2011),Assessment of Ground Motion Variability and Its Effects on Seismic Hazard Analysis: A Case Study for Iceland, Bulletin of Earthquake Engineering, Vol. 9, No. 4, pp. 931-953.
29. Ornthammarath T., Warnitchai P., Worakanchana K., Zaman S., Sigbjörnsson R., Lai C.G. (2011). Probabilistic Seismic Hazard Assessment for Thailand, Bulletin of Earthquake Engineering, Vol. 9, No. 2, pp. 367-394.
30. Pennucci D., Sullivan T.J., Calvi G.M. (2011) Displacement Reduction Factors for the Design of Medium and Long Period Structures, Journal of Earthquake Engineering, Vol. 15, Supplement 1, pp. 1-29.
31. Rota M., Lai C.G., Strobbia C. (2011). Stochastic 1D Site Response Analysis at a Site in Central Italy, Soil Dynamics and Earthquake Engineering, Vol. 31, No. 4, pp. 626-639.
32. Rota M., Penna A., Strobbia C., Magenes G. (2011). Typological seismic risk maps for Italy, Earthquake Spectra, Vol. 27, pp. 907-926; doi:10.1193/1.3609850.
33. Scandella, L., Lai, C.G., Spallarossa, D., Corigliano, M. (2011). Ground Shaking Scenarios at the Town of Vicoforte, Italy, Soil Dynamics and Earthquake Engineering, Vol. 31, No. 5-6, pp. 757-772.
34. Senaldi I., Magenes G., Ingham J. (2011). Performance of unreinforced stone masonry buildings during the 2010/2011 Canterbury earthquake swarm and retrofit techniques for their seismic improvement, SESOC Journal, Vol. 24, No. 2, pp. 44-57.
35. Sullivan T.J. (2011). An Energy Factor Method for the Displacement-Based Seismic Design of RC Wall Structures, Journal of Earthquake Engineering, Vol. 7, No.15, pp.1083-1116.
36. Wijesundara K.K., Nascimbene R., Sullivan T. (2011). Equivalent viscous damping for steel concentrically braced frame structures, Bulletin of Earthquake Engineering, Vol .9, No. 5, pp.1535-1558.
37. Yazgan U., Dazio A. (2011). Post-earthquake damage assessment using residual displacements, Earthquake Engng. Struct. Dyn.. doi: 10.1002/eqe.1184.
38. Yazgan U., Dazio A. (2011). Simulating Maximum and Residual Displacements of RC Structures: I. Accuracy, Earthquake Spectra, Vol. 27, pp. 1187-1202.
39. Yazgan U., Dazio A. (2011). Simulating Maximum and Residual Displacements of RC Structures: II. Sensitivity, Earthquake Spectra, Vol. 27, pp. 1203-1218.

 

Articoli su rivista nazionale

1. Bolognini D., Scandella L., Bozzoni F., Dazio A. (2011). Dossier preliminare sul terremoto Mw=9.0 di Tohoku dell’11 marzo 2011, Progettazione Sismica, Vol. 1, No. 1, pp. 11-38.
2. Bolognini D. (2011). Aggiornamento sul terremoto Mw=9.0 di Tohoku, Progettazione Sismica, No.2, pp. 7-26.
3. Bozzoni F., Scandella L., Lai C.G., Corigliano M. (2011). Stima del Danno Sismico di Porti Marittimi Attraverso la Tecnologia GIS: il Caso del Porto di Salerno, Progettazione Sismica, Vol. 1, No. 1, pp. 117-137.
4. Fagà E., Moratti M., Calvi G.M., Nascimbene R. (2011). Adeguamento sismico di serbatoi sopraelevati in cemento armato: metodologie di analisi e verifica, Progettazione Sismica, No. 3, pp.7-22.
5. Fort V., Nascimbene R., Wijesundara K.K. (2011). Valutazione del coefficiente di smorzamento viscoso equivalente per strutture in acciaio a controventi concentrici e sezione rettangolare cava: metodo agli spostamenti (DDBD), Ingegneria Sismica (International Journal of Earthquake Engineering), No. 3, pp.43-66.
6. Marinini L., Spatti P., Riva P., Nascimbene R. (2011). Strutture prefabbricate: moderni sistemi di protezione antisimica, Progettazione Sismica, N. 3, pp.23-44.
7. Morandi P., Magenes G., Penna A. (2011). Costruzioni di muratura di laterizio: la progettazione sismica secondo le NTC 2008 Structural, Vol.167, pp. 22-36.

  

Capitoli di libro

1. Auricchio F., Conti M., Morganti S., Reali A. (2011). Shape memory alloys: Material modeling and device finite element simulations, in Damage and Fracture in Smart Materials Systems, IUTAM Symposium on Multiscale Modelling of Fatigue, M. Kuna and A. Ricoeur editors, Springer, pp. 33-42.
2. Bonfiglio A., Curone D., Secco E.L., Magenes G., Tognetti A., De Rossi D. (2011). Emergency and work, in Wearable Monitoring Systems, Springer, pp. 205-221.
3. Penna A. (2011). Tools and strategies for the performance-based seismic assessment of masonry buildings, in Protection of built environment against earthquakes, M. Dolšek editor, Springer.

  

Articoli conferenze internazionali

1. Auricchio F. (2011). Elasticity and elasto-plasticity 2d problems addressed via a novel finite particle formulation, Proceedings of the COMPDYN 2011, 3rd International Conference on Computational Methods in Structural Dynamics & Earthquake Engineering, Corfù, Greece.
2. Auricchio F. (2011). Recent developments on the 3d modeling of sma, Proceedings of the ASME 2011, Conference on Smart Materials Adaptive Structures and Intelligent Systems, Arizona, USA.
3. Beyer K., Dazio A. (2011). Modelling of spandrel elements in URM structures with RC slabs or ring beams, 11th North American Masonry Conference, Minneapolis, Minnesota, USA.
4. Borzi B., Ceresa P., Faravelli M., Fiorini E., Onida M. (2011). Definition of a prioritization procedure for structural retrofitting of Italian school buildings, Proceedings of COMPDYN 2011, Corfù, Paper No. 302.
5. Corigliano M., Lai C.G. (2011). Seismic Response of Gravity Wharves Using Modified Newmark Modelling with a Double-Support Excitation, Proceedings 5th International Conference on Earthquake Geotechnical Engineering, 5ICEGE, Santiago, Chile, January, Paper No. 1797340236.
6. Corigliano M., Lai, C.G., Pasquali, R. (2011). Displacement-Based Seismic Design of Gravity Walls Using Double-Support Excitation, Proceedings 8th International Conference on Structural Dynamics, EURODYN2011, Leuven, Belgium, July 4 – 6, 2011, Paper No. 571.
7. Dazio A., Beyer K. (2011). Experimental investigation of the effect of the longitudinal reinforcement content of ring beams on the cyclic behavior of masonry spandrels, 11th North American Masonry Conference, Minneapolis, Minnesota, USA.
8. Khan E., Sullivan T.J. (2011). Direct Displacement-Based Design of a Reinforced Concrete Deck Arch Bridge, Proceedings of International Conference on Earthquake Engineering and Seismology (ICEES 2011), NUST, Islamabad, Pakistan, Paper No. 37.
9. Lanese I., Pavese A., Dacarro F. (2011), Real-time Dynamic Hybrid Test with Sub-structuring: theory and step-by-step Implementation, Proceedings of 4AESE conference, Ispra, Italy.
10. Lunghi F., Pavese A., Peloso P., Lanese I., Silvestri D. (2011), Machine Vision System for High Precision Measurements in Dynamic Testing Proceedings of 4AESE conference, Ispra, Italy.
11. Magenes G., Curone D., Secco E.L., Bonfiglio A. (2011). Biosensing and Environmental Sensing for Emergency and Protection E-Textiles, Invited paper, 33rd Annual Int Conf of the IEEE Eng in Medicine and Biology Society – EMBC, pp. 8365-8368.
12. Magenes G., Curone D., Secco E. L., Bonfiglio A. (2011). The ProeTEX prototype: a wearable integrated system for physiological & environmental monitoring of emergency operators, 1st IEEE EMBS Unconference on Wearable & Ubiquitous Technology for Health & Wellness, Boston, USA.
13. Magenes G., Penna A. (2011). Seismic design and assessment of masonry buildings in Europe: recent research and code development issues, Keynote paper, Proceedings of the 9th Australasian Masonry Conference, Queenstown, New Zealand, pp. 585-603.
14. Magni F., Sullivan T.J., Pinho R. Calvi G.M. (2011). Development of computer software for Direct Displacement Based Design, Proceedings of Structural Engineering World Conference 2011, Como, Italy, Paper No.73.
15. Sanchez H.L., Lai C.G., Andres F.A.R. (2011). Use of Geostatistics and Random Field Theory to Account for Uncertainty and Spatial Variability of Soil Properties in Two-Dimensional Site Response Analyses, Proceedings 4th IASPEI/IAEE International Symposium: Effects of Surface Geology on Seismic Motion, ESG2011, University of California Santa Barbara, USA, Paper No. 17801.
16. Santagati S., Wijesundara K.K., Bolognini D. (2001). Strain Life Analysis of Concentrically Steel Braces with Rectangular Hollow Section Shape, 6th European Conference on Steel and Composite Structures (EuroSteel), Budapest, Hungary.
17. Sousa R., Bianchi F., Pinho R. e Nascimbene R., Seismic assessment of existing buildings: critical comparison between Eurocode 8 and Italian Seismic Code, Proceedings of Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN, Corfu, Greece.
18. Sullivan T.J., Maley T., Calvi G.M. (2011). Seismic response of steel moment resisting frames designed using a Direct DBD procedure, Proceedings of the 8th International Conference on Structural Dynamics, Eurodyn2011, Leuven, Belgium, Paper No.730.
19. Sullivan T.J., Quaini M., Maley T., Calvi G.M. (2011). Deformed Shapes of Steel Moment Resisting Frames Subject to Earthquake Actions, Proceedings of the 6th European Conference on Steel and Composite Structures, Eurosteel 2011, Budapest, Hungary, Paper No.322.

 

Articoli conferenze nazionali

1. Belleri A., Riva P., Bolognini D. (2011). Studio della risposta sismica di dispositivi di dissipazione per strutture prefabbricate, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
2. Borzi B., Ceresa P., Faravelli M., Fiorini E., Onida M. (2011). Applicazione del metodo meccanico SP-BELA alla definizione di rischio sismico e scenari di danno del patrimonio edilizio italiano, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy, Paper No. 802.
3. Borzi B., Ceresa P., Faravelli M., Fiorini E., Onida M. (2011). Nuove mappe di rischio e scenari di danno del territorio nazionale: risultati e confronti con gli studi precedenti, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy, Paper No. 803.
4. Borzi B., Di Meo A., Faravelli M., Fiorini E., Onida M. (2011). Definizione di una procedura di prioritizzazione per interventi di mitigazione del rischio degli edifici scolastici, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy, Paper No. 793.
5. Borzi B., Di Meo A., Faravelli M., Fiorini E., Onida M. (2011). Mappe di rischio sismico e scenario per gli edifici scolastici italiani, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy, Paper No. 794.
6. Brunesi E., Bellotti D., Bolognini D., Nascimbene R. (2011). Sviluppo di modelli per la definizione della rigidezza equivalente di differenti configurazioni di travi tralicciate, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
7. Ceresa P., Marziali L., Borzi B. (2011). Progettazione simulata di ponti esistenti in CA per una valutazione della loro vulnerabilità sismica, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy, Paper No. 936.
8. Fagà E., Moratti M., Nascimbene R., Pinho R. (2011). Analisi e verifica sismica di serbatoi pensili a traliccio esistenti in cemento armato, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
9. Graziotti F., Magenes G., Penna A., Galasco A. (2011). Comportamento ciclico sperimentale nel piano di fasce in muratura di pietra, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
10. Liberatore L., Decanini L.D., Magenes G., Penna A., Liberatore D., Sorrentino L. (2011). Comportamento degli edifici in cemento armato ed in muratura e dei ponti in occasione del terremoto del Cile del 27 febbraio 2010, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
11. Morandi P., Hak S., Magenes G. (2011), Comportamento sismico delle tamponature in laterizio in telai in c.a.: definizione dei livelli prestazionali e calibrazione di un modello numerico, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari,Italy.
12. Morandi P., Hak S., Magenes G. (2011), Comportamento sismico delle tamponature in laterizio in telai in c.a.: analisi numeriche su edifici ed implicazioni progettuali, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari,Italy.
13. Onida M., Borzi B., Noto F. (2011). Applicazione di un metodo meccanico per la definizione del rischio sismico dei ponti: piattaforma GIS e reperimento dati, Proceedings of theXIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy, Paper No. 1133.
14. Penna A., Mandirola M., Rota M., Magenes G., Galante P., Pedolazzi S. (2011). Prestazioni sismiche della muratura in calcestruzzo aerato autoclavato con sola armatura orizzontale, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari,Italy.
15. Santagati S., Bolognini D. (2011). Comportamento Isteretico di Diagonali Concentriche in Acciaio a Sezione Rettangolare Cava, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
16. Santagati S., Bolognini D., Nascimbene R. (2011). Valutazione del comportamento di controventi concentrici con sezione rettangolare cava soggetti a fatica a basso numero di cicli, XXIII Congresso C.T.A. Le giornate Italiane della costruzione in acciaio, Ischia, Italy.
17. Sorrentino L., Liberatore D., Penna A., Magenes G., Decanini L.D., Liberatore L. (2011). Vulnerabilità delle chiese colpite dal sisma del Cile del 2010, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
18. Sousa R., Bianchi F., Pinho R., Nascimbene R. (2011). Problematiche di modellazione nella valutazione sismica delle strutture esistenti, 18 Convegno AIST, Bologna,Italy.
19. Sousa R., Bianchi F., Pinho R. e Nascimbene R. (2011). Valutazione sismica di edifici esistenti in CA: un confronto fra l’Eurocodice 8 e le Nuove Norme Tecniche per le Costruzioni (NTC-08), Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
20. Sullivan T.J., Calvi G.M. (2011). Considerations for the Seismic Assessment of Buildings Using the Direct Displacement-Based Assessment Approach, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
21. Taverna L., Zuccolo E., Corigliano M., Rota M., Lai C.G., Penna A. (2011). SEISM-HOME: Selection of Input Strong-Motion for Homogeneous Megazones, Proceedings of the 30° Congresso Nazionale GNGTS (Gruppo Nazionale di Geofisica della Terra Solida), Trieste, Italy.
22. Taverna L., Zuccolo E., Corigliano M., Rota M., Lai C.G. e Penna A. (2011). SEISM-HOME: SElection of Input Strong-Motion for HOmogeneous Megazones, Proceedings of the 30 Convegno del Gruppo Nazionale di Geofisica della Terra Solida, GNGTS, Trieste, Italy.
23. Wijesundara K.K., Brunesi E., Bolognini D., Nascimbene R. (2011). Resistenza a Taglio di Solai Alveolari Prefabbricati Precompressi, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.
24. Zuccolo E., Corigliano M., Taverna L., Lai C.G. (2011). Meso-Zonazione di un Territorio per la Definizione di Accelerogrammi Reali Spettro-Compatibili, Proceedings of the XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy.

 

Libri

1. Calvi GM., Nascimbene R. (2011). Progettare i Gusci, IUSS-Press.

 

Rapporti di ricerca

1. Lago,A., Sullivan T.J. (2011). A Review of Glass Façade Systems and Research into the Seismic Design of Frameless Glass Façades, Research Report ROSE2011/01, IUSS Press, Pavia, Italy, 166 pages.
2. Pennucci D., Sullivan T.J., and Calvi G.M. (2011). Performance-Based Seismic Design of Tall RC Wall Buildings, Research Report ROSE2011/02, IUSS Press, Pavia, Italy, 319 pages.

Articoli su rivista internazionale

1. Adhikari G., Petrini L., Calvi G.M. (2010). Application of direct displacement based design to long span bridges, Bulletin of Earthquake Engineering, Vol. 8, 2010, pp. 897–919.
2. Ahmad, N., Crowley, H., Pinho, R. and Ali, Q. (2010). Displacement-based earthquake loss assessment of masonry buildings in Mansera City, Pakistan, Journal of Earthquake Engineering, Vol 14, Special Issue 1, pp 1-37.
3. Aldrighi M., Dell’Acqua F., Manfredi M. (2010). Eigenmethod for feature matching of pre- and post-event images exploiting adjacency, IEEE Transactions on Geoscience and Remote Sensing (TGRS), vol.: 48, issue: 7, pages: 2890 – 2898.
4. Arghavani J., Auricchio F., Naghdabadi R., Reali A., Sohrabpour S. (2010). A 3-D phenomenological constitutive model for shape memory alloys under multiaxial loadings, International Journal of Plasticity, Vol. 26, pp 976-991.
5. Arghavani J., Auricchio F., Naghdabadi R., Reali A., Sohrabpour S. (2010). A 3D finite strain phenomenological constitutive model for shape memory alloys considering martensite reorientation, Continuum Mechanics and Thermodynamics, Vol. 22, pp. 345-362.
6. Asprone D., Auricchio F., Manfredi G., Prota A., Reali A., Sangalli G. (2010). SPH methods for a 1D elastic model problem: error analysis and development of a second-order accurate formulation, Computer Modeling in Engineering & Sciences (CMES), Vol.62, pp.1-22.
7. Asprone D., Auricchio F., Reali A. (2010). Novel Finite Particle Formulations Based on Projection Methodologies, International Journal for Numerical Methods in Fluids, in press (published online).
8. Auricchio F., Balduzzi G., Lovadina C. (2010). A new modeling approach for planar beams: finite-element solutions based on mixed variational derivations, Journal of Mechanics of Materials and Structures, Vol. 5, pp. 771-794.
9. Auricchio F., Beirao da Veiga L., Hughes T.J.R., Reali A., Sangalli G. (2010). Isogeometric Collocation Methods, Mathematical Models and Methods in Applied Sciences, Vol. 20, pp. 2075-2107.
10. Auricchio F., Beirao da Veiga L., Lovadina C., Reali A. (2010). The importance of the exact satisfaction of the incompressibility constraint in nonlinear elasticity: mixed FEMs versus NURBS-based approximations, Computer Methods in Applied Mechanics and Engineering, Vol. 199, pp 314-323.
11. Auricchio F., Bonetti E., Marigonda A. (2010). A metric approach to plasticity via Hamilton-Jacobi equation, Mathematical Models and Methods in Applied Sciences, Vol. 20, pp. 1617-1647.
12. Auricchio F., Conti M., De Beule M., De Santis G., Verhegghe B. (2010). Carotid artery stenting simulation: From patient-specific images to finite element analysis, Medical Engineering & Physics, in press (published online).
13. Auricchio F., Conti M., Morganti S., Reali A. (2010). Shape Memory Alloy: from constitutive modelling to finite element analysis of stent deployment, Computer Modeling in Engineering & Sciences (CMES), Vol. 57, pp. 225-243.
14. Auricchio F., Reali A., Tardugno A. (2010). Shape-memory alloys: effective 3D modeling, computational aspects and design of devices, International Journal of Computational Materials Science and Surface Engineering, Vol. 3, pp.199-223.
15. Bal, I.E., Bommer, J.J., Stafford, P.J., Crowley, H. and Pinho, R. (2010). The Influence of Geographical Resolution of Urban Exposure Data in an Earthquake Loss Model for Istanbul, Earthquake Spectra, Vol 26, no. 3, pp 619-634.
16. Borzi B., Dell’Acqua F., Faravelli M., Gamba P., Lisini G., Onida M., Polli D. (2010). Vulnerability study on a large industrial area using satellite remotely sensed images, Bulletin of Earthquake Engineering, DOI : 10.1007/s10518-010-9211-9.
17. Calabrese A., Almeida J.P., Pinho R, (2010). Numerical issues in distributed inelasticity modelling of RC frame elements for seismic analysis, Journal of Earthquake Engineering, Vol. 14, pp. 38-68.
18. Calvi, G.M., Sullivan, T.J., and Villani, A., (2010). Conceptual seismic design of cable stayed bridges Journal of Earthquake Engineering, Vol 14. Issue 8., pp 1-33.
19. Crowley, H. and Pinho, R. (2010). Revisiting Eurocode 8 formulae for periods of vibration and their employment in linear seismic analysis, Earthquake Engineering and Structural Dynamics, Vol. 39, pp. 223-235.
20. Curone D., Bertolotti G., Cristiani A., Secco E. L., Magenes G., (2010). A Real-Time and Self-Calibrating Algorithm Based on Tri-Axial Accelerometer signals for the Detection of Human Posture and Activity, IEEE Trans on Information Technology in Biomedicine, Vol. 14 (4), pp. 1098-1105.
21. Curone D., Secco E. L., Tognetti A., Loriga G., Dudnik G., Risatti M., Waite R., Bonfiglio A., Magenes G., (2010). Smart Garments for Emergency Operators: the ProeTEX Project, IEEE Trans on Information Technology in Biomedicine, Vol. 14 (3), pp. 694-701.
22. Curone D., Tognetti A., Secco E.L., Anania G., Carbonaro N., De Rossi D., Magenes G., (2010). Heart rate and Accelerometer Data Fusion for Activity Assessment of Rescuers during Emergency Interventions, IEEE Trans on Information Technology in Biomedicine, Vol. 14 (3), pp. 702-710.
23. Garcia, R., Sullivan T.J. and Della Corte, G. (2010). Development of a Displacement-Based Design for Steel Frame-RC Wall Buildings, Journal of Earthquake Engineering, Vol.14, No.2, pp252-277.
24. Hughes T.J.R., Reali A., Sangalli G. (2010). Efficient Quadrature for NURBS-based Isogeometric Analysis, Computer Methods in Applied Mechanics and Engineering, Vol.199, pp. 301-313.
25. Lago A., Sullivan T.J., Calvi G.M. (2010). A Novel Seismic Design Strategy for Structures with Complex Geometry Journal of Earthquake Engineering, Vol.14, Supp. 1. pp. 69–105.
26. Maley T.J., Sullivan T.J., Della Corte G. (2010). Development of a Displacement-Based Design Method for Steel Dual Systems with Buckling-Restrained Braces and Moment Resisting Frames Journal of Earthquake Engineering, Vol.14, Supp. 1.
27. Menon, A., Ornthammarath, T., Corigliano, M., Lai, C.G. (2010). Probabilistic Seismic Hazard Macrozonation of Tamil Nadu in Southern India, Bulletin of Seismological Society of America, Vol.100, No.3, pp. 1320-1341.
28. Pasquali, R., Lai, C.G., Corigliano, M. (2010). Some Issues in Seismic Analysis and Design of Blockwork Wharves, Journal of Earthquake Engineering, Vol. 14, No. 1, pp. 102-130.
29. Rota M., Penna A., Magenes G. (2010). A methodology for deriving analytical fragility curves for masonry buildings based on stochastic nonlinear analyses, Engineering Structures, Vol. 32, No. 5, pp. 1312-1323.
30. Senaldi I. E., Magenes G., Penna A. (2010). Numerical investigations on the seismic response of masonry building aggregates, Advanced Materials Research, Vols. 133-134, pp 715-720.
31. Sullivan, T.J. (2010). Capacity Design Considerations for RC Frame-Wall Structures, Earthquakes and Structures, Vol. 1, No. 4, pp.391-410.

 

Articoli su rivista nazionale

1. Bolognini D., Bellotti D., Brunesi E. (2010). Proposta di un metodo di progetto di plinti a bicchiere in c.a., Progettazione Sismica, n.2.
2. Calvi G.M. (2010). A lezione dai terremoti, Progettazione Sismica, No. 1, pp. 3-16.
3. Calvi G.M. (2010). Due storie italiane di ingegneria sismica, Progettazione Sismica, No. 2, pp. 3-7.
4. Calvi G.M. (2010). La vera storia del Progetto C.A.S.E., Progettazione Sismica, No. 3, pp. 3-5.
5. Calvi G.M., Pietra D., Moratti M. (2010). Criteri per la progettazione di dispositivi di isolamento a pendolo scorrevole, Progettazione Sismica, No. 3, pp. 7-30.
6. Colombi M., Crowley H., Di Capua G., Peppoloni S., Borzi B., Pinho R., Calvi G.M. (2010). Mappe di rischio sismico a scala nazionale con dati aggiornati sulla pericolosità sismica di base e locale, Progettazione Sismica, No. 1, pages 93-112.
7. Crowley H., Colombi M., Lopez M., Teramo M.S., Pinho R., (2010). La simulazione numerica delle conseguenze di un terremoto a Messina, Mondo digitale, n°4 anno IX.
8. Crowley, H., Stucchi, M., Meletti, C., Calvi, G.M. and Pacir, F. (2010). Revisiting italian design code spectra following the L’Aquila earthquake, L’Aquila, April 6th 2009, 3:32 am, Progettazione Sismica, IUSS Press, Italy.
9. Fagà E., Bianco L., Bellotti D., Bolognini D., Nascimbene R. (2010). Comportamento Ciclico di un Sistema di Collegamento tra Pilastri Prefabbricati e Fondazione Mediante l’impiego di Piastre Metalliche e Tirafondi, Structural Modeling, Magazine di Ingegneria Strutturale, CSP Fea.
10. Magenes G. (2010). Muratura in laterizio: progettazione strutturale, Il Giornale dell’Ingegnere, No. 17.
11. Penna A. (2010). Vantaggi della muratura armata nella progettazione antisismica, Il Giornale dell’Ingegnere, No. 17.
12. Teramo, M.S., Crowley, H., Cultrera, G., Cirella, A. and Pinho, R. (2010). Valutazione del rischio sismico per la città di Messina, un approccio ad albero logico, Progettazione Sismica, 2010 Vol 2, 95-116.
13. Wijesundara K.K., Bolognini D., Nascimbene R. (2010). Analisi non lineari di controventi in acciaio, Structural Modeling, Magazine di Ingegneria Strutturale, CSP Fea, Vol. 2, pp. 12-15.

 

Capitoli di libro

1. Bolognini D.,Nascimbene R. (2010). Costruzioni con struttura prefabbricata in Norme Tecniche per le Costruzioni – Guida alla interpretazione e applicazione del D.M. 14.1.2008 e della circolare applicativa 617/2009 a cura di D.Guzzoni, Il Sole 24 Ore ed, pp. 314-331.
2. Lai, C.G. (2010). Azione Sismica in Norme Tecniche per le Costruzioni – Guida alla interpretazione e applicazione del D.M. 14.1.2008 e della circolare applicativa 617/2009 a cura di D.Guzzoni, Il Sole 24 Ore ed, pp. 624.
3. Magenes, G., Penna, A.). Costruzioni di muratura, in Norme Tecniche per le Costruzioni – Guida alla interpretazione e applicazione del D:M. 14/1/2008 e della Circolare esplicativa 617/2009, a cura di D.Guzzoni, Il Sole 24 Ore ed., pp. 371-382.
4. Polli D., Dell’Acqua F. (2010). Fusion of optical and SAR data for seismic vulnerability mapping of buildings, In book: Optical Remote Sensing – Advances in Signal Processing and Exploitation Techniques by Saurabh Prasad, Lori Mann Bruce, Jocelyn Chanussot, Springer Verlag. In press.
5. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M., (2010). Introduction to a Model Code for Displacement-Based Seismic Design in Advances in Performance-Based Earthquake Engineering, Edited by Fardis M., Springer, pp.137-148.
6. Sullivan T.J., Salawdeh S., Pecker A., Corigliano M., and Calvi G.M. (2010). Soil-Foundation-Structure Interaction Considerations for Performance-Based Design of RC Wall Structures on Shallow Foundations in Soil-Foundation-Structure Interaction, Edited by Ornese, R.P., Chouw, N., Pender, M.J., CRC Press, pp.193-200.
7. Wijesundara K.K., Bolognini D., Nascimbene R. (2010). Numerical simulation of gusset plate connection with RHS shape brace under cyclic loading in Computational Methods in Earthquake Engineering, Computational Methods in Applied Sciences, Vol. 21, Manolis Papadrakakis, Michalis Fragiadakis e Nikos D. Lagaros Editors, Springer Publisher, pp. 177-199.

  

Articoli conferenze internazionali

1. Agosti, M., Corigliano, M., Lai, C.G. (2010). Dam-Surface Fault Rupture Interaction: A Case Study Near L’Aquila, Central Italy, Proceedings 14th European Conference on Earthquake Engineering, Skopje Ohrid, Republic of Macedonia, Paper No. 1404.
2. Ahmad, N., Ali, Q., Crowley, H., Pinho, R., (2010). Displacement-based seismic risk assessment of stonemasonry buildings of Pakistan, Proceedings of the 3rd Asia Conference on Earthquake Engineering, Paper id. ACEE-P-101, Bangkok, Thailand.
3. Ahmad, N., Crowley, H., Pinho, R. and Ali, Q. (2010). Derivation of displacement-based fragility functions for masonry buildings, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 327, Ohrid, Macedonia.
4. Ahmad, N., Crowley, H., Pinho, R., and Ali, Q. (2010). Simplified formulae for the displacement capacity, energy dissipation and characteristic vibration period of brick masonry buildings, Proceedings of the International Masonry Society , paper n° 11, 1385-1394, Dresden, Germany.
5. Almeida J.P., Correia A.A., Pinho R. (2010). Validation of a force-based flexure-shear element for 3D inelastic seismic analysis of frames, Proceedings of the 14th European Conference on Earthquake Engineering, , FYROM, Paper no. 729, Ohrid, Macedonia.
6. Almeida J.P., Das S. and Pinho R. (2010). Guidelines for fibre-based inelasticity modelling of reinforced concrete members, Proceedings of the 14th European Conference on Earthquake Engineering, FYROM, Paper no. 764. Ohrid, Macedonia.
7. Arghavani J., Auricchio F., Naghdabadi R., Reali A., (2010). A finite strain SMA constitutive model: comparison of small and finite strain formulations, Proceedings of the ISME2010, 18th Annual International Conference on Mechanical Engineering, Tehran, Iran.
8. Arghavani J., Auricchio F., Naghdabadi R., Reali A., Sohrabpour S., (2010). An efficient, non-regularized solution algorithm for a finite strain shape memory alloy constitutivw model, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, Istanbul, Turkey.
9. Arghavani J., Auricchio F., Naghdabadi R., Reali A., (2010). On the constitutive modeling and numerical implementation of shape memory alloys under multiaxial loadings – Part I: constitutive model development at small and finite strains, Proceedings of the School and Symposium on Smart Structural Systems Technologies, Porto, Portugal.
10. Arghavani J., Auricchio F., Naghdabadi R., Reali A., (2010). On the constitutive modeling and numerical implementation of shape memory alloys under multiaxial loadings – Part II: numerical implementation and simulations, Proceedings of the School and Symposium on Smart Structural Systems Technologies, Porto, Portugal.
11. Arghavani J., Auricchio F., Reali A., Sohrabpour S., (2010). A class of shape memory alloy constitutive models based on a new set of internal variables, Proceedings of the ISME2010, 18th Annual International Conference on Mechanical Engineering, Tehran, Iran.
12. Auricchio F., Arghavani J., Conti M., Morganti S., Reali A., U., (2010). Shape-memory alloys: effective 3D modeling, computational aspects and Stefanelli analysis of actuator and biomedical devices, Proceedings of ACTUATOR10 – International Conference and Exhibition on New Actuators and Drive Systems, Bremen, Germany.
13. Auricchio F., Conti M., Morganti S., Totaro P., Viganò M., (2010). Finite Element Analysis of Stentless Valve Implant in Patient-Specific Aortic Root Geometry, RUM2010 – SIMULIA Italy Regional Users’ Meeting, Torino, Italy.
14. Bhatt C., Bento R., Pinho R. (2010). Assessing a real 3D Turkish RC building using Nonlinear Static Procedures, Proceedings of the 9th US National and 19th Canadian Conference on Earthquake Engineering, Toronto, Canada.
15. Bhatt C., Bento R., Pinho R. (2010). Verification of Nonlinear Static Procedures for a 3D plan-irregular building in Turkey, Proceedings of the 14th European Conference on Earthquake Engineering, FYROM, Paper no. 667, Ohrid, Macedonia.
16. Bournas, D. A. and Pavese, A., (2010), “Experimental Behavior of Prefabricated Concrete Walls Subjected to Seismic Loading”, Proceedings of the 14th European Conference on Earthquake Engineering (14 ECEE), Ohrid, Macedonia.
17. Bournas, D. A., Pavese, A., and Peloso, S., (2010), “Seismic Behavior of Prefabricated Concrete Sandwich Panels”, Proceedings of the Fourth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2010), Cape Town, South Africa.
18. Bozzoni, F., Corigliano, M., Lai, C.G., Scandella, L., Salazar, W., Latchman, J., Lynch L., Robertson, R. (2010). Probabilistic Seismic Hazard Assessment Study for the Eastern Caribbean Region, Proceedings 14th European Conference on Earthquake Engineering, Skopje Ohrid, Republic of Macedonia, Paper No. 920.
19. Bozzoni, F., Corigliano, M., Lai, C.G., Scandella, L. (2010). Seismic Risk Assessment of Italian Seaports Using GIS and Guidelines for Seismic Design, Proceedings 32nd PIANC MMX Congress, 125th Anniversary Liverpool UK.
20. Broglio, S., Crowley, H. and Pinho, R. (2010). Simplified capacity curves for RC bridges, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 1336, Ohrid, Macedonia.
21. Broglio, S., Crowley, H. and Pinho, R. (2010). Structure-dependent displacement-based intensity measure for bridges, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 1338, Ohrid, Macedonia.
22. Calvi G.M. (2010). L’Aquila earthquake 2009: reconstruction between temporary and definitive, 2010 NZSEE Annual Technical Conference, Wellington, New Zealand.
23. Casarotti, C., Peloso, S. and Pavese, A., (2010). Seismic response of the hospital facilities during the 2009 Abruzzi earthquake, 14th European Conference On Earthquake Engineering (14 ECEE 2010), Ohrid, Macedonia.
24. Casarotti, C., Peloso, S. and Pavese, A., (2010). The L’Aquila earthquake of April 6th 2009: seismic response of the hospital facilities, Proceedings of the Fourth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2010), Cape Town, South Africa.
25. Conti M., Auricchio F., De Santis G., De Beule M., Verhegghe B. (2010). Patient-specific finite element analysis of carotid artery stenting, Proceedings of the ASME 2010 Summer Bioengineering Conference SBC2010, Naples, Florida, USA.
26. Dell’Acqua F., Polli D., Candela L. (2010). Further advances in automatic mapping of seismic damage based on very high resolution SAR images “, Proc. of the 2010 Joint EARSeL SIG Workshop, Gent, Belgium.
27. Dell’Acqua F., Polli D., Ferrari S. (2010). Spaceborne support to post-earthquake operations: detection of sparse man-made features in wide-scale safety inspection, Proc. of EUSAR 2010, Aachen, Germany, 8-10 June 2010.
28. Dell’Acqua, F., Polli, D., Lisini, G. (2010). “Automatic Mapping of Earthquake Damage using Post-event Radar Satellite Data: The Story Goes On, Accepted for oral presentation at the 30th EARSeL Symposium, Paris, France, 31th May – 4th June 2010.
29. Fagà E., Bianco L., Bolognini D. , Nascimbene R. (2010). Comparison between numerical and experimental cyclic response of alternative column to foundation connections of RC precast structures Third International fib Congress and Exhibition, Washington D.C.
30. Galasco A., Magenes G., Penna A., Da Paré M. (2010). In-plane cyclic shear tests of undressed double leaf stone masonry panels, Proceedings of the 14th European Conference on Earthquake Engineering, Paper n. 1435, Ohrid, Macedonia.
31. Jaiswal, K., Wald, D. and Crowley, H. (2010). An empirical model for estimating economic losses due to large worldwide earthquakes, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 1082, Ohrid, Macedonia.
32. Kumar, M., Bal, I.E., Crowley, H. and Pinho, R. (2010). Period-height and displacement capacity equations for embedded beam RC structures, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 245, Ohrid, Macedonia.
33. Hilje, T., Sullivan, T.J. and Pennucci, D. (2010). Accounting for torsion in the DBD of multi-storey wall structures Proceedings of SECED young engineers conference, London, UK.
34. Lago, A., Blandini, L., and Sullivan, T.J. (2010). “Seismic Performance of Structural Glass in Modern Façade Structures, International Symposium on the Application of Architectural Glass, Munich, Germany.
35. Lai, C.G., Crempien de La Carrera, J.G.F. (2010). On the Stability of the Inversion of Measured Seismic Wave Velocities to Estimate Porosity in Fluid-Saturated Porous Media, Proceedings in Continuous Media with Microstructure, Special Jubilee, International Conference on the Occasion of the 70th birthday of Prof. Krzysztof Wilmanski. Zielona Gòra, Poland.
36. León Agüero, J.C., Sullivan, T.J. (2010). A comparison of displacement-based and force-based design applied to an unbounded post-tensioned precast concrete frame building Proceedings of SECED young engineers conference, London, UK.
37. Lunghi, F., Pavese, A., Peloso, S. and Lanese, I., (2010). Computer Vision System for advanced high precision displacement measurements, Proceedings of the 2nd SERIES Workshop, Ohrid, Republic of Macedonia.
38. Magenes G. (2010). Earthquake resistant design of masonry structures: rules, backgrounds, latest findings, keynote speech, Proceedings of the 8th International Masonry Conference, Dresden, Germany.
39. Magenes G., Curone D., Caldani L., Secco E.L., (2010). Fire Fighters and Rescuers Monitoring through Wearable Sensors: the ProeTEX Project, Proceedings of 32th Annual Int Conf of the IEEE Eng in Medicine and Biology Society – EMBC, pp. 3594-3597.
40. Magenes G., Penna A., Galasco A. (2010). A full-scale shaking table test on a two-storey stone masonry building, Proceedings of the 14th European Conference on Earthquake Engineering, Paper n. 1432, Ohrid, Macedonia.
41. Magenes G., Penna A., Galasco A., Da Paré M. (2010). In-plane cyclic shear tests of undressed double-leaf stone masonry panels, Proceedings of the 8th International Masonry Conference, Paper n. 216, Dresden, Germany.
42. Magenes G., Penna A., Galasco A., Rota M. (2010). Experimental characterisation of stone masonry mechanical properties, Proceedings of the 8th International Masonry Conference, Paper n. 217, Dresden, Germany.
43. Modica, A., Stafford, P.J., Bommer, J.J. and Crowley, H. (2010). Estimates of demand in loss estimation made through the use of vectors of intensity measure. SECED Young Engineers Conference, London.
44. Mpampatsikos V., Bolognini D. (2010), (2010). Direct Displacement-Based Design of Controlled Rocking Precast Wall Panels Systems, Third International fib Congress and Exhibition, Washington D.C.
45. Mpampatsikos V., Bolognini D. (2010). Yielding displacement and equivalent viscous damping ratio for the DDBD of hybrid wall systems, 14th European Conference on Earthquake Engineering ECEE, Ohrid, Macedonia.
46. Ornthammarath, T., Douglas, J., Sigbjörnsson, R., Lai, C.G. (2010). Assessment of strong ground motion variability in Iceland, Proceedings 14th European Conference on Earthquake Engineering, Skopje Ohrid, Republic of Macedonia, Paper No. 1263.
47. Peloso, S., Lanese, I., Pavese, A., Zanardi, A., (2010). Modeling and Design Issues of Non Load-Bearing Permanent Shuttering Systems with Concrete under Seismic Loads, Proceedings of the Fourth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2010), Cape Town, South Africa.
48. Peloso, S., Pavese, A. and Casarotti, C., (2010). EUCENTRE TREES LAB: Laboratory for Training and Research in Earthquake Engineering and Seismology, Proceedings of the 2nd SERIES Workshop, Ohrid, Republic of Macedonia.
49. Peloso, S., Zanardi, A., Lanese, I. and, Pavese, A., (2010). Innovative Construction Techniques for Buildings in Seismic Areas: Structural Modelling and Design Issues, Proceedings of the 14th European Conference on Earthquake Engineering (14 ECEE), Ohrid, Macedonia.
50. Penna A., Menon A., Magenes G. (2010). Improving the seismic performance of masonry buildings by flat-truss bed-joint reinforcement, Proceedings of the 8th International Masonry Conference, Paper n. 215, Dresden, Germany.
51. Penna A., Rota M., Magenes G., Frumento S. (2010). Seismic performance assessment of AAC masonry, Proceedings of the 14th European Conference on Earthquake Engineering, Paper n. 1431, Ohrid, Macedonia.
52. Pennucci D., Sullivan, T.J. and Calvi, A., (2010). Evaluation of Higher Mode Effects in Tall Building Response Proceedings, 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper 653.
53. Pessina V., Fiorini E., Paolucci R. (2010). GIS based identification of topographic sites in Italy with significant ground motion amplification effects, Proceedings of the 5th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, California, Paper no. 6.20b.
54. Polli D., Dell’Acqua F.). Assessing earthquake damage from post-event VHR radar images only: a preliminary study on COSMO/Skymed images from the L’Aquila, 6th April 2009 earthquake, Proceedings of the 2010 ESA Living Planet Symposium, Bergen, Norway,
55. Polli D., Dell’Acqua F., Gamba P. (2010). Seismic vulnerability assessment in the framework of GEO: a case study on Messina, Italy, Proc. of the 6th International Symposium on Geo-information for Disaster Management (Gi4DM), Turin, Italy, 2-4 February.
56. Polli D., Dell’Acqua F., Gamba P.). Exploiting satellite data for large-scale assessment of seismic vulnerability in human settlement areas (GEO DI-09-01A), Proceedings of the 2010 ESA Living Planet Symposium, Bergen, Norway.
57. Polli D., Dell’acqua F., Gamba P. and Lisini G. (2010): “Earthquake Damage Assessment from Post-Event Only Radar Satellite Data, Proc. of the Eighth International Workshop on Remote Sensing for Disaster Respons, Tokyo, Japan.
58. Raimondi M., Santagati S., Bellotti D., Bolognini D., Nascimbene R. (2010), A numerical model for the evaluation of the seismic response of RC walls, Proceedings of the 14th European Conference on Earthquake Engineering, FYROM, Ohrid, Macedonia.
59. Rota M., Penna A., Magenes G. (2010). Stochastic seismic assessment of unreinforced masonry buildings, Proceedings of the 8th International Masonry Conference, Paper n. 218, Dresden, Germany.
60. Scandella, L., Lai, C.G., Spallarossa, D., Corigliano, M. (2010). Ground Shaking Scenarios at the Basilica with the World’s Largest Elliptical Dome in Vicoforte, Northern Italy, Proceedings 14th European Conference on Earthquake Engineering, Skopje Ohrid, Republic of Macedonia, Paper No. 970.
61. Senaldi I. E., Magenes G., Penna A. (2010). Numerical investigations on the seismic response of masonry building aggregates, Proceedings of the International Conference on Structural Analysis of Historical Constructions 2010, Shanghai, Cina.
62. Senaldi I.E., Magenes G., Penna A. (2010). Seismic analysis of masonry building aggregates, Proceedings of the 14th European Conference on Earthquake Engineering, Paper n. 1433, Ohrid, Macedonia..
63. Soltane S., Ben Mekki O., Montassar S., Auricchio F., (2010). Damping stay-cable transverse vibration using shape memory alloys and magneto rheological dampers, Proceedings of the Third Euro Mediterranean Symposium on Advances in Geomaterials ans Structures AGS2010, Djerba, Tunisia.
64. Sullivan, T.J. (2010). Potential benefits of an energy-factor displacement-based design approach Proceedings, 9th US National and 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders, Toronto, paper 147.
65. Sullivan, T.J. and Lago, A., (2010). Retrofit of RC Wall Buildings using Viscous Dampers Proceedings, 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper 698.
66. Tarque, N., Crowley, H., Pinho, R. And Varum, H. (2010). Seismic capacity of adobe dwellings, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 216, Ohrid, Macedonia.
67. Tarque, N., Crowley, H., Pinho, R. And Varum, H. (2010). Structural properties of adobe dwellings in Cusco for seismic risk assessment, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 217, Ohrid, Macedonia.
68. Tarque, N., Crowley, H., Pinho, R. And Varum, H. (2010). Seismic risk assessment of adobe dwellings in Cusco, Peru, based on on mechanical procedures, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 218, Ohrid, Macedonia.
69. Teramo, M.S., Crowley, H. and Pinho, R. (2010). Seismic risk assessment of the city of Messina (Italy) based on a logic tree approach, Proceedings of the 14th European Conference on Earthquake Engineering, paper no. 567, Ohrid, Macedonia.
70. Weatherill, G., Crowley, H. and Pinho, R. (2010). Review and critical assessment of seismic input in current design codes, Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia.
71. Wijesundara K.K., Bolognini D., Nascimbene R. Rassati G.A. (2010), “Seismic performance of brace-beam-column connections in concentrically braced frames, NASCC North American Steel Construction Conference, Orlando, Florida.
72. Wijesundara K.K., Rassati G.A., Bolognini D., Nascimbene R. (2010). Effect of gusset end restraint on the effective length of bracing members in concentrically braced frames, Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia.

 

Convegni nazionali – National Conferences

1. Almeida J.P., Correia A.A., Pinho R. (2010). Incursion into the inelastic range of a column modelled with a new force-based flexure-shear frame element, Proceedings of the 8th Portuguese Conference on Engineering Seismology and Earthquake Engineering, Aveiro, Portugal.
2. Asinari M., Prato C. A., Penna A., Magenes G. (2010). Modelación numérica de paneles de mampostería encadenada através de macro-elementos, Atti 21º Jornadas Argentinas de Ingenieria Estructural, Buenos Aires, Argentina (in spagnolo).
3. Belleri A., Riva P., Bolognini D., Nascimbene R. (2010). Metodi di protezione sismica di strutture prefabbricate mediante dispositivi di dissipazione, Atti del 18° Convegno CTE, Brescia, Italia.
4. Bhatt C., Bento R., Pinho R. (2010). Nonlinear Static Analyses for the seismic assessment of the SPEAR building, Proceedings of the 8th Portuguese Conference on Engineering Seismology and Earthquake Engineering, Aveiro, Portugal, Paper no. 23.
5. Bhatt C., Bento R., Pinho R. (2010). Applying the Adaptive Capacity Spectrum method to real plan-irregular buildings, Proceedings of the 8th Portuguese Conference on Engineering Seismology and Earthquake Engineering, Aveiro, Portugal, Paper no. 24.
6. Correia A.A., Pecker A., Kramer S., Pinho R. (2010). Soil-Foundation-Structure interaction: overview and state-of-the-art seismic analysis of shallow foundations, Proceedings of the 12th Portuguese National Conference on Geotechnical Engineering, Guimaraes, Portugal.
7. Fagà E., Bianco L., Bellotti D., Bolognini D., Nascimbene R. (2010). Risposta a carichi ciclici di un sistema di collegamento tra pilastri prefabbricati e fondazione mediante piastre metalliche e tirafondi, Atti del 18° Convegno CTE, Brescia, Italia.
8. Fiorini E., Onida M., Borzi B., Faravelli M., Pagano M. (2010). Definizione delle priorità di intervento per scuole italiane: un applicazione webgis per il rischio sismico, Atti del 28° Convegno Nazionale GNGTS, Prato, Italia.
9. Silva V.E., Varum H., Crowley H., Pinho R. (2010). Developing a global seismic risk engine, Proceedings of the 8th Portuguese Conference on Engineering Seismology and Earthquake Engineering, Aveiro, Portugal, Paper no. 122.

 

Rapporti di ricerca

1. Bal. I.E., Crowley, H. and Pinho, R. (2010). Displacement-based earthquake loss assessment: Method development and application to Turkish building stock, ROSE Research Report 2010/02, IUSS Press, Pavia, Italy.

Articoli su rivista internazionale

1. Attanasi G., Auricchio F., Fenves G.L. (2009). Feasibility assessment of an innovative isolation bearing system with shape memory alloys, Journal of Earthquake Engineering, Vol. 13, pp. 18-39.
2. Attanasi G., Auricchio F., Fenves G.L. (2009). Feasibility investigation of superelastic effect devices for seismic isolation applications, Journal of Materials Engineering and Performance, Vol. 18, pp. 729-737.
3. Auricchio F., Coda A., Reali A., Urbano M. (2009). SMA numerical modeling versus experimental results: parameter identification and model prediction capabilities, Journal of Materials Engineering and Performance, Vol. 18, pp. 649-654.
4. Auricchio F., Reali A., Stefanelli U. (2009). A macroscopic 1D model for shape memory alloys including asymmetric behaviors and transformation-dependent elastic properties, Computer Methods in Applied Mechanics and Engineering, Vol. 198, pp. 1631-1637.
5. Bellotti D., Bolognini D., Nascimbene R. (2009). Seismic response of traditional RC precast structures, Environmental Semeiotics, Vol. 2, No. 2, ISSN 1971-3460, pp. 63 -119.
6. Casarotti C., Monteiro R., Pinho R. (2009). Verification of spectral reduction factors for seismic assessment of bridges, Bulletin of New Zealand Society for Earthquake Engineering, Vol. 42, No. 2.
7. Ceresa P., Petrini L., Pinho R., R. Sousa. (2009). A fibre flexure-shear model for seismic analysis of RC-framed structures, Earthquake Engineering and Structural Dynamics, Special Issue “Nonlinear Modeling, Analysis and Simulation for Earthquake Engineering, Vol. 38, No. 5, pp. 537-586.
8. Conti M., De Beule M., Mortier P., Van Loo D., Verdonck P., Vermassen F., Segers P., Verhegghe B., Auricchio F. (2009). Nitinol Embolic Protection Filters: Design Investigation by Finite Element Analysis, Journal of Materials Engineering and Performance, 18, pp. 787-792.
9. Crowley H., Colombi M., Borzi B., Faravelli M., Onida M., Lopez M., Polli D., Meroni F., Pinho R. (2009). Comparison of seismic risk maps for Italy, Bulletin of Earthquake Engineering, Vol. 7, pp. 149-180.
10. Ferracuti B., Pinho R., Savoia M., Francia R. (2009). Verification of Displacement-based Adaptive Pushover through multi-ground motion incremental dynamic analyses, Engineering Structures, Vol. 31, pp. 1789-1799.
11. Magenes G., Menon A. (2009). A review of the current status of seismic design and assessment of masonry buildings in Europe, Journal of Structural Engineering, SERC Madras, Vol. 35, No. 6, pp. 247-256.
12. Menon A., Ornthammarath T., Corigliano M., Lai C.G. (2009). Probabilistic Seismic Hazard Macrozonation of Tamil Nadu in Southern India, Bulletin of Seismological Society of America, in press.
13. Mpampatsikos V., Petrini L., Nascimbene R. (2009). Considerations and suggestions about the seismic assessment procedures of existing r.c. frame buildings according to OPCM 3431 and Eurocode 8, Environmental Semeiotics, Vol. 2 (Suppl. 1). pp.31-47.
14. Pasquali R., Lai C.G., Corigliano M. (2009). Some Issues in Seismic Analysis and Design of Blockwork Wharves, Journal of Earthquake Engineering, in press.
15. Pennucci D., Calvi G.M., Sullivan T.J. (2009). Displacement-Based Design of Precast Walls with additional dampers, Journal of Earthquake Engineering, Vol. 13 (Suppl. 1). pp. 40-65.
16. Pinho R., Monteiro R., Casarotti C., Delgado R. (2009). Assessment of continuous span bridges through Nonlinear Static Procedures, Earthquake Spectra, Vol. 25, No. 1, pp. 143-159.
17. Polli D., Dell’Acqua F., Gamba P. (2009). First Steps Towards a Framework for Earth Observation (EO) – Based Seismic Vulnerability Evaluation, Environmental Semeiotics, Vol.2(1). pp. 16-30. DOI 10.3383/es.2.1.2
18. Sullivan T.J. (2009). Direct Displacement-Based Design of a RC Wall-Steel EBF Dual System with Added Dampers, Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 42, No.3.
19. Smyrou E., Blandon C., Antoniou S., Pinho R., Crisafulli F. (2009). Implementation and verification of a masonry panel model for nonlinear dynamic analysis of infilled RC frames, Earthquake Engineering and Structural Dynamics, in press.
20. Wijesundara K.K., Bolognini D., Nascimbene R., Calvi G.M. (2009). Review of Design Parameters of Concentrically Braced Frames with RHS Shape Braces, Journal of Earthquake Engineering, Vol. 13, Issue 1, pp. 109-131.

Articoli su rivista nazionale

1. Borzi B., Dell’Acqua F., Faravelli M., Gamba P., Lisini G., Onida M., Polli D. (2009). Studio di vulnerabilità di una vasta area industriale mediante immagini telerilevate da satellite, Progettazione Sismica, No. 2, pp 105-117.
2. Calvi G.M., Pinho R. (2009). L’impatto economico del sisma, Social News, Vol. 6, No. 4, pp. 30-31.
3. Colombi M., Crowley H., Di Capua G., Peppoloni S., Borzi B., Pinho R., Calvi G.M. (2009). Mappe di rischio sismico a scala nazionale con dati aggiornati sulla pericolosità sismica di base e locale, Progettazione Sismica, in press.
4. Corigliano M., Lai C.G., Barla G. (2009). Simplified Approaches in the Seismic Design of Deep Tunnels, Progettazione Sismica., No. 1, pp. 105-133.
5. Dell’Acqua F., Gamba P., Lisini G., Polli D. (2009). Il telerilevamento satellitare come strumento per la gestione del disastro: caso di studio sul terremoto de L’Aquila del 6 aprile 2009, Progettazione Sismica, No. 3, pp. 87-96, ISSN 1973-7432.
6. Dell’Acqua F., Gamba P., Lisini G., Polli D. (2009). Satellite remote sensing as a tool for management of emergencies from natural disasters: a case study on L’Aquila, 6th April 2009 earthquake, Progettazione Sismica, No. 3, Special Issue for L’Aquila Earthquake., pp. 85-94.
7. Fagà E., Bolognini D., Nascimbene R. (2009). Metodi di progettazione e verifica sismica di strutture in acciaio a controventi concentrici, Ingegneria Sismica, No.4.
8. Lai C.G., Corigliano M., Agosti M. (2009). Earthquakes and Dams: the case of L’Aquila 2009 Seismic Event, Progettazione Sismica, No. 3, Special Issue for L’Aquila Earthquake., pp. 183-205.
9. Lanese I., Marazzi F., Nascimbene R. (2009). Il cambiamento di scala delle strutture per la verifica sismica su tavola vibrante: un telaio in c.a. progettato per carichi verticali, Ingegneria Sismica, No. 4, pp. 13-27.
10. Pinho R., Crowley H. (2009). Messina – dal terremoto del 1908 alla valutazione di scenari di danno nel 2008, L’Ingegnere Italiano, supplemento al n. 347.

Libri

1. Lai C.G., Foti S., Rota M. (2009). Input sismico e stabilità geotecnica dei siti di costruzione, IUSS Press, Pavia, ISBN: 978-88-6198-035-8, pp. 312.

Capitoli di libro

1. Auricchio F., Beirao da Veiga L., Lovadina C., Reali A. (2009). Stability of Some Finite Element Methods for Finite Elasticity Problems in Mixed Finite Element Technologies, Carstensen C., Wriggers P. (Eds.). Springer, pp. 179-206.
2. Dell’Acqua F., Polli D.(2009). Fusion of optical and SAR data for seismic vulnerability mapping of buildings in Optical Remote Sensing – Advances in Signal Processing and Exploitation Techniques, Saurabh Prasad (Ed.). Springer, in press.

Articoli conferenze internazionali

1. Antoniou S., Pinho R. (2009). Displacement-based Adaptive Pushover, Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2009). Rhodes, Greece, Paper n. CD448.
2. Auricchio F., Conti M., Morganti S., Reali A. (2009). A discussion on SMA beams under flexure exploiting the shape-memory effect, Proceedings of the COMPLAS X – X International Conference on Computational Plasticity, Barcelona, Spain.
3. Auricchio F., Conti M., Morganti S., Reali A. (2009). Shape Memory Alloys: Material Modeling and Device Finite Element Simulations, Proceedings of IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems, Freiberg, Germany.
4. Auricchio F., Morganti S., Reali A. (2009). SMA numerical modeling versus experimental results, Proceedings of the ESOMAT2009, 8th European Symposium on Martensitic Transformation.
5. Bhatt C., Bento R., Pinho R. (2009). 3D irregular SPEAR building’s assessment using Nonlinear Static Procedures, Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2009). Rhodes, Greece, Paper n. CD244.
6. Borg R.C., Corigliano M., Lai C.G., Pavese A. (2009). Large Scale 1-g Shaking Table Test of an Unanchored Earth-Retaining RC Diaphragm, Proceedings of International Conference on Performance-Based Design in Earthquake Geotechnical Engineering − from Case History to Practice − IS-Tokyo,Tsukuba, Japan.
7. Camata G., Biondi S., De Matteis G., Lai C.G., Spacone E., Vanzi I., Vasta M. (2009). Post Damage Assessment of the L’Aquila, Abruzzo April 6, 2009 Earthquake, Proceedings of COMPDYN 2009 ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, N.D. Lagaros, M. Fragiadakis (Eds.) Rhodes, Greece.
8. Corigliano M., Lai C.G., Pasquali R. (2009). Seismic response of gravity walls using Newmark-type modelling with double-support excitation, Proceedings of International workshop SFSI on Soil-Foundation-Structure Interaction, Auckland, New Zealand.
9. Dell’Acqua F., Lisini G., Gamba P. (2009). Experiences in optical and SAR imagery analysis for damage assessment in the Wuhan, May 2008 earthquake, Proceedings of IGARSS 2009, Cape Town, South Africa.
10. Dell’Acqua F., Gamba P., Odasso L., Lisini G. (2009). Segment-based urban block outlining in High-Resolution SAR images, Proceedings of the 2009 Joint Urban Remote Sensing Event (JURSE 2009). Shanghai, P.R.C.
11. García R., Sullivan T.J., Della Corte G. (2009). Método de diseño sísmico basado en desplazamientos para estructuras con marcos de acero y muros de concreto, Proceedings of the XVII National Congress of Earthquake Engineering, Puebla, Mexico (in CD). Paper No. V-02.
12. Goggins J.G., Sullivan T.J. (2009). Displacement-based seismic design of SDOF concentrically braced frames, Proceedings of STESSA 2009, Mazzolani, Ricles & Sause (eds). Taylor & Francis Group, pp. 685-692.
13. Hughes T.J.R., Reali A., Sangalli G. (2009). Isogeometric Methods in Structural Dynamics and Wave Propagation, Proceedings of COMPDYN 2009 – Computational Methods in Structural Dynamics and Earthquake Engineering.
14. Khan Z.H., Cascante G., El Naggar M.H., Lai C.G. (2009). Evaluation of First Mode of Vibration, Base Fixidity, and Frequency Effects in Resonant-Column Testing, Proceedings of 62nd Canadian Geotechnical Conference and 10th Joint CGS/IAH-CNC Groundwater Conference, Geo-Halifax 2009, Halifax, Nova Scotia, Canada, Paper reference no. 357.
15. Lai C.G. (2009). Ground motions for performance-based earthquake engineering, Proceedings of ACES Workshop: Advances in Performance-Based Earthquake Engineering, Corfu (Greece).
16. Lai C.G., Corigliano M., Sanchez H.L. (2009). Some Examples of 1D Fully Stochastic Site Response Analyses of Soil Deposits, Proceedings of ACES Workshop: Advances in Performance-Based Earthquake Engineering, Corfu (Greece).
17. Magenes G., Curone D., Lanati M., Secco E.L. (2009). Long-Distance Monitoring of Physiological and Environmental Parameters for Emergency Operators, Proceedings of 31th Annual Int Conf of the IEEE Eng in Medicine and Biology Society – EMBC.
18. Mpampatsikos V., Bolognini D., Nascimbene R. (2009). Assessment of the equivalent viscous damping ratio for hybrid wall-to-foundation connections of precast wall panels, Proceedings of Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2009, Rhodes.
19. Mpampatsikos V., Petrini L., Nascimbene R. (2009). EUROCODE 8: comparison of different methods of analysis for the assessment of existing r.c. frame buildings, Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN, 22-24 June 2009, Rhodes.
20. Peloso S., Pavese A. (2009). FRP Seismic Retrofit for Insufficient Lap-Splice: Large Scale Testing of Rectangular Hollow Section Bridge Piers, COMPDYN 2009, Computational Methods in Structural Dynamics and Earthquake Engineering, Rhodes, Greece.
21. Reali A. (2009). Advanced Computational Tools for Structural Mechanics and Earthquake Engineering, Proceedings of Earthquake Engineering by the Beach.
22. Soltane S., Ben Mekki O., Montassar S., Auricchio F. (2009). Contrôle des vibrations transversales des câbles des ponts à haubans par des alliages à mémoire de forme, Proceedings of Matériaux Sols et Structures (MS2). Tunisia.
23. Wijesundara K.K., Bolognini D., Nascimbene R. (2009). Numerical simulation of the behaviour of gusset plate connections in concentrically braced frames under cyclic loading, Proceedings of 2nd International Conference on Computational Dynamics and Earthquake Engineering-COMPDYN-2009, Rhodes.

Articoli conferenze nazionali

1. Bellotti D., Bolognini D., Nascimbene R. (2009). Risposta sismica di strutture prefabbricate tradizionali in c.a., Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
2. Biserna F., Ferracuti B., Savoia M., Pinho R. (2009). Distributed and lumped-plasticity approaches for modeling RC frame structures under seismic action, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia, Paper no. S2.2.
3. Borzi B., Ceresa P., Lopez M., Magni F., Bianchi F. (2009). Metodo semplificato per la definizione della curva di Pushover di edifici in ca a telaio, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia, No. Paper S2.3.
4. Calabrese A., Almeida J., Pinho R. (2009). Modelling, interpreting results and extracting reliable outputs from distributed inelasticity formulations, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia., Paper no. S10.5.
5. Calvi G.M., Sullivan. T.J. (2009). Development of a Model Code for Direct Displacement-Based Seismic Design, Coordinator’s Report for Linea IV of the RELUIS Project, www.reluis.it.
6. Casarotti C., Dacarro F., Pavese A., (2009). Mobile Unit for Fast Experimental Post-Earthquake Vulnerability Assessment, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
7. Casarotti C., Lunghi F., Dacarro F., Penna A., Rota M., Pavese A., Peloso S. (2009). Mobile Unit for Fast Experimental Post-Earthquake Vulnerability Assessment, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
8. Casarotti C., Peloso S., Lunghi F. (2009). NEARB-OPCM3274: System Identification of a Torsionally Coupled Building, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
9. Ceresa P., Petrini L., Pinho R. (2009). Modellazione della risposta taglio-flessione di elementi strutturali in CA soggetti a carico ciclico, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia, No. Paper S2.6.
10. Fagà E., Bolognini D., Nascimbene R., Fort V. (2009). Metodi di progettazione di strutture in acciaio a controventi concentrici in zona sismica, Atti del XXII Congresso CTA L’acciaio per un futuro sostenibile, Padova, Italia.
11. Ferracuti B., Savoia M., Pinho R. (2009). 3D pushover analysis for evaluating torsional effect of RC structures, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia, Paper no. SM3.6.
12. Fiorini E., Onida M. (2009). Piattaforma GIS per lo studio di rischio sismico dell’area industriale di Priolo Gargallo, Atti della 12 Conferenza Italiana Utenti ESRI, Roma, Italia.
13. Frumento S., Magenes G., Morandi P., (2009). Interpretazione di prove cicliche di compressione e taglio eseguite su pannelli in muratura in laterizio, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
14. Frumento S., Magenes G., Morandi P., (2009). Valutazione del fattore di struttura q per differenti tipologie di muratura in laterizio, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
15. Galasco A., Magenes G., Da Paré M., Penna A. (2009). Risposta ciclica sperimentale di pannelli in muratura di pietra Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
16. Ianniruberto U., Pennucci D. (2009). Analisi numerica del comportamento di nodi in c.a. rinforzati con FRP, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
17. Lai C.G., Corigliano M., Agosti M. (2009). Rio Fucino dam: interaction with Campotosto fault, Proceedings of 28th Italian National GNGTS (National Group of Geophysics of Solid Earth) Congress, Trieste, Italia.
18. Lago A., Sullivan T.J. (2009). Complex Geometry Structures in Seismic Regions, Innovative Design and Construction Technologies – Building Complex Shapes and Beyond, Id&cT09, Maggioli Editore, pp353-365.
19. Lagomarsino S., Magenes G. (2009). Evaluation and Reduction of the Vulnerability of Masonry Buildings, in G. Manfredi, M. Dolce (eds). The state of Earthquake Engineering Research in Italy: the ReLUIS-DPC 2005-2008 Project, pp. 1-50, Doppiavoce, Napoli, Italia.
20. Magenes G., Galasco A., Penna A. (2009). Caratterizzazione meccanica di una muratura in pietra, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
21. Magenes G., Modena C., Da Porto F., Morandi P., (2009). Seismic Behaviour and Design of New Masonry Buildings: Recent Developments and Consequent Effects on Design Codes, in Cosenza E. (ed). Eurocode 8 Perspectives from the Italian Standpoint Workshop, pp. 185-198, Doppiavoce, Napoli, Italia.
22. Magenes G., Penna A. (2009). Existing Masonry Buildings: General Code Issues and Methods of Analysis and Assessment, in Cosenza E. (ed). Eurocode 8 Perspectives from the Italian Standpoint Workshop, pp. 185-198, Doppiavoce, Napoli, Italia.
23. Mpampatsikos V., Petrini L., Nascimbene R. (2009). Indicazioni per la modellazione della rigidezza effettiva degli elementi strutturali nelle analisi lineari di edifici esistenti intelaiati in c.a., Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
24. Menon A., Corigliano M., Lai C.G., Ornthammarath T. (2009). Extended Source Models versus Zone-Free Methods in Probabilistic Seismic Hazard Assessment, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
25. Morandi P., Magenes G. (2009). Risposta sismica nel piano di pareti murarie in blocchi in laterizio alleggerito, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
26. Novelli V.I., Sullivan T. J., Pinho R., (2009). Rigidezza di scarico per elementi in cemento armato, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia, No. Paper S2.15.
27. Rota M., Penna A., Magenes G. (2009). Un approccio stocastico per l’analisi della vulnerabilità sismica degli edifici in muratura, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
28. Scandella L., Lai C.G., Spallarossa D., Corigliano M. (2009). Deterministic Ground Shaking Scenarios at Vicoforte Sanctuary (Northern Italy). Proceedings of 28th Italian National GNGTS (National Group of Geophysics of Solid Earth) Congress, Trieste, Italia.
29. Sullivan T.J., Calvi G.M., Pennucci D. (2009). Introduzione di un nuovo codice modello per DBD., Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.
30. Tarque N., Crowley H., Varum H., Pinho R. (2009). Structural properties of adobe dwellings in Cusco (Peru) for seismic risk assessment, Proceedings of the 1st Mediterranean Conference on Earth Architecture, Cagliari, Italia.
31. Wijesundara K.K., Bolognini D., Nascimbene R., Corigliano M., Lai C.G. (2009). Real Vs Artificial Accelerograms in Time Histories Analyses of Brace Frame Structures, Atti del XIII Convegno Nazionale “L’ingegneria sismica in Italia, ANIDIS, Bologna, Italia.

Rapporti di ricerca

1. Bianco L., Santagati S., Bolognini D., Nascimbene R. (2009). Seismic response of columns connected to the foundation through a fastening technique, Peikko News, No. 1, pp.13-20.
2. Bianco L., Santagati S., Bolognini D., Nascimbene R. (2009). Valutazione della risposta sismica di connessioni pilastro-fondazione mediante sistema metallico bullonato scarpa – tirafondo, C&PI Calcestruzzo & Prefabbricazione International, No. 1, pp. 170-176.
3. Calvi G.M., Sullivan. T.J. (2009). A model code for the Displacement-Based Seismic Design of Structures, DBD09 – Draft Issued for Public Enquiry, IUSS Press, pp. 80.
4. Frumento S., Magenes G., Morandi P., Calvi G.M. (2009). Interpretation of experimental shear tests on clay brick masonry walls and evaluation of q-factors for seismic design, Research Report EUCENTRE 2009/02, IUSS Press, Pavia.
5. Lai C.G., Corigliano M., Sanchez H.L., Scandella L. (2009). Definition of Seismic Input at the “Regina Montis Regalis Cathedral of Vicoforte, Northern Italy – A Basilica of Great Historical, Architectural and Structural Significance for its World’s Largest Elliptical Dome, Research Report EUCENTRE 2009/03, IUSS Press, Pavia, pp. 386.
6. Lai, C.G., Menon A., Corigliano M., Ornthamarrath T., Sanchez H.L., Dodagoudar G.R. (2009). Probabilistic seismic hazard assessment and stochastic site response analysis at the archaeological site of Kancheepuram in Southern India, Research Report EUCENTRE 2009/01, IUSS Press, Pavia, ISBN: 978-88-6198-037-2, pp. 250.

Articoli su rivista internazionale

1. Pinho R., Crowley H. (2008). Using basic principles of mechanics of materials to assess the seismic risk of entire countries, Environmental Semeiotics, Vol. 1, No. 1, pp. 119.
2. Borzi B., Pinho R., Crowley H. (2008). Simplified pushoverbased vulnerability analysis for large scale assessment of RC buildings, Engineering Structures, Vol. 30, No. 3, pp. 804820.
3. Bal I., Crowley H., Pinho R., Gulay F. (2008). Detailed assessment of structural characteristics of Turkish RC building stock for loss assessment models, Soil Dynamics and Earthquake Engineering, Vol. 28, No. 1011, pp. 914932.
4. Bal I., Crowley H., Pinho R. (2008). Displacementbased earthquake loss assessment for an earthquake scenario in Istanbul, Journal of Earthquake Engineering, Vol. 12, Special Issue 2, pp. 1222.
5. Borzi B., Crowley H., Pinho R. (2008). Simplified pushoverbased earthquake loss assessment (SPBELA) method for masonry buildings, International Journal of Architectural Heritage, in press.
6. Casarotti C., Monteiro R., Pinho R. (2008). Verification of spectral reduction factors for seismic assessment of bridges, Bulletin of New Zealand Society for Earthquake Engineering, in press.
7. Colombi M., Borzi B., Crowley H., Onida M., Meroni F., Pinho R. (2008). Deriving vulnerability curves using Italian earthquake damage data, Bulletin of Earthquake Engineering, in press.
8. Crowley H., Borzi B., Pinho R., Colombi M., Onida M. (2008). Comparison of two mechanicsbased methods for simplified structural analysis in vulnerability assessment, Advances in Civil Engineering, Vol. 2008, Issue Q2, pp. 119.
9. rowley, H., Pinho, R. [2008] “Using Basic Principles of Mechanics of Materials to Assess the Seismic Risk of Entire Countries, Environmental Semeiotics, Vol. 1, No. 1, pp. 119.
10. Crowley, H., Bommer, J.J. and Stafford, P. (2008). Recent developments in the treatment of groundmotion variability in earthquake loss models, Journal of Earthquake Engineering, Special Issue, Volume 12, Issue S2, pp. 7180.
11. Strasser, F.O., Bommer, J.J., Sesetyan, K., Erdik, M., Cagnan, Z., Irizarry, J., Goula, X., Lucantoni, A., Sabetta, F., Bal, I.E., Crowley, H. and Lindholm, C. (2008). A comparative study of European Earthquake Loss Estimation Tools for an Earthquake Scenario in Istanbul, Journal of Earthquake Engineering, Volume 12, Issue S2, pp. 246256.
12. Crowley, H., Stafford, P.J. and Bommer, J.J. (2008). Can earthquake loss models be validated using field observations? Journal of Earthquake Engineering, Vol. 12, Issue 7, pp 10781104.
13. Khan, Z.H., Cascante, G., El Naggar, M.H., and Lai, C.G. (2008). Measurement of FrequencyDependent Dynamic Properties of Soils Using the Resonant Column Devise, Journal of Geotechnical and Geoenvironmental Engineering, Engrg. 134, 1319.
14. Morandi P., Magenes G.; Griffith M.(2008), “Second Order Effects in outofplane strength of unreinforced masonry walls subjected to bending and compression, Australian Journal of Structural Engineering, Vol.8, No.2, pp.133144. ISSN: 13287982.
15. Rota M., Penna A. and Strobbia C. (2008). Processing Italian damage data to derive typological fragility curves, Soil Dynamics and Earthquake Engineering, Vol. 28, No. 1011, pp. 933947.
16. Auricchio F., Beirao da Veiga L., Lovadina C., Reali A. (2008). The importance of the exact satisfaction of the incompressibility constraint in nonlinear elasticity: mixed FEMs versus NURBSbased approximations, in press (published online) on Computer Methods in Applied Mechanics and Engineering.
17. Auricchio F., Reali A. (2008). Shape Memory Alloys: Material Modeling and Device Finite Element Simulations, Materials Science Forum, 583:257275.
18. Auricchio F., Carotenuto P., Reali A. (2008). On the geometrically exact beam model: a consistent, effective and simple derivation from threedimensional finite elasticity, International Journal of Solids and Structures, 45:47664781.
19. Auricchio F., Fugazza D., DesRoches R. (2008). Ratedependent thermomechanical modelling of superelastic shape memory alloys for seismic applications, Journal of Intelligent Material Systems and Structures, 19:4761.
20. Auricchio F., Mielke A., Stefanelli U. (2008). A rateindipendent model for the isothermal quasistatic evolution of shapememory materials, Mathematical Models and Methods in Applied Sciences, 18:125164.
21. Hughes T.J.R., Reali A., Sangalli G. (2008). Duality and Unified Analysis of Discrete Approximations in Structural Dynamics and Wave Propagation: Comparison of pmethod Finite Elements with kmethod NURBS, Computer Methods in Applied Mechanics and Engineering, 197: 41044124.

 

Articoli su rivista nazionale

1. Borzi B., Dell’Acqua F., Faravelli M., Gamba P., Lisini G., Onida M., Polli D. (2008). Studio di vulnerabilità di una vasta area industriale mediante immagini telerilevate da satellite Progettazione Sismica, in press.
2. Lai, C.G., Strobbia, C., Dall’Ara, A. (2008). Definition of Seismic Input in the Tuscan Territories of Lunigiana and Garfagnana, Italian Geotechnical Journal (RIG). No. 1, pp. 929. (in Italian).
3. Lanese I., Marazzi F., Nascimbene R. (2008). Il cambiamento di scala delle strutture per la verifica sismica su tavola vibrante: un telaio in c.a. progettato per carichi verticali, Ingegneria Sismica, N. 4 OttobreDicembre 2008, pp.1327.

  

Capitoli di Libro

1. Fragiadakis M., Pinho R., Antoniou S. (2008). Modelling inelastic buckling of reinforcing bars under earthquake loading, in Progress in Computational Dynamics and Earthquake Engineering, M. Papadrakakis, D.C. Charmpis, N.D. Lagaros and Y. Tsompanakis (Eds.), A.A. Balkema Publishers Taylor & Francis, The Netherlands.
2. Calvi G.M., Pinho R., Magenes G. (2008). Traditional and innovative methods for seismic vulnerability assessment at large geographical scales, in The 1755 Lisbon earthquake: revisited, L.A. MendesVictor, C.S. Sousa Oliveira C.S., J. Azevedo, A. Ribeiro (Eds.), Springer, Dordrecht, The Netherlands.
3. Mathews, M.S. and Menon, A. (2008). Retrofit of historical and heritage structures, Handbook on Seismic Retrofit of Buildings, Amarnath Chakrabarti, Devdas Menon and A. K. Sengupta (Eds.), CPWD, New Delhi and Indian Building Congress in association with Indian Institute of Technology Madras, Narosa Publishing House, New Delhi, ISBN: 9788173199189, pp. 472.
4. Magenes G., Curone D., Secco E. L., Bonfiglio A. (2008), “Sistemi Indossabili per il monitoraggio degli operatori di soccorso: il progetto ProeTex, in Sistemi Indossabili per la Salute e la Protezione dell’Uomo, Patron Editore.

  

Articoli conferenze internazionali

1. Albini P., Meroni F., Pinho R. (2008). The 1667 earthquake damage in the town of Ragusa (today Dubrovnik, Croatia), Proceedings of the 31st General Assembly of the European Seismological Commission, Crete, Greece
2. Bal I.E., Crowley H., Pinho R. (2008). Earthquake Loss Assessment for Istanbul, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 100036.
3. Bal I.E., Crowley H., Pinho R. (2008). Development of a displacementbased earthquake loss assessment method for Turkish buildings, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 05040044.
4. Bento R., Pinho R., Bhatt C. (2008). Seismic assessment of the 3D irregular SPEAR building using different Nonlinear Static Procedures, Proceedings of the 5th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Catania, Italy, Paper no. 55.
5. Bento R., Pinho R., Bhatt C. (2008). Nonlinear Static Procedures for the seismic assessment of the 3D irregular SPEAR building, Proceedings of the Workshop on Nonlinear Static Methods for Design/Assessment of 3D Structures, Lisbon, Portugal.
6. Bolognini D., Borzi B., Pinho R. (2008). Simplified pushoverbased vulnerability analysis of traditional Italian RC precast structures, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 09010133.
7. Borzi B., Crowley H., Pinho R. (2008). The influence of infill panels on vulnerability curves for RC buildings, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 09010111.
8. Borzi B., Pola D., Vona M., Pinho R., Masi A. (2008). An extensive validation exercise on simplified methods for the seismic performance evaluation of RC frame buildings,Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 09010112.
9. Ceresa P., Petrini L., Pinho R. (2008). Cyclic nonlinear behaviour of reinforced concrete planar frames accounting for flexureshear interaction, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 140165.
10. Ceresa P., Petrini L., Pinho R., Auricchio F. (2008). Development of a Fibre FlexureShear Model for Seismic Analysis of RC Framed Structures, Minisymposium on Computational Methods for Seismic Analysis and Design, WCMM8 and ECCOMAS 2008, Venice, Italy (reference No. 2068).
11. Correia A.A., Almeida J.P., Pinho R. (2008). Forcebased versus displacementbased formulations in the cyclic nonlinear analysis of reinforced concrete frames, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 140164.
12. Almeida J.P., Correia A.A., Pinho R. (2008). Development of a 3D forcebased beam element for nonlinear analysis of RC frame structures considering flexureshear coupling, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 140166.
13. Crowley H., Colombi M., Calvi G.M., Pinho R., Meroni F. (2008). Application of a prioritization scheme for seismic intervention in school buildings in Italy, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 09010097.
14. MálagaChuquitaype C., Pinho R., Bommer J.J. (2008). Selection and scaling of groundmotion records for nonlinear responsehistory analyses based on equivalent SDOF systems, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 05010064.
15. Monteiro R., Casarotti C., Pinho R. (2008). Using Nonlinear Static Procedures for seismic assessment of irregular viaducts, Proceedings of the 5th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Catania, Italy, Paper no. 22.
16. avan A., Pinho R. (2008). Blind prediction of the response of a fullscale 3D steel frame tested under dynamic conditions, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. S1701009.
17. Pinho R., Bento R., Bhatt C. (2008). Adaptive Capacity Spectrum Method for seismic assessment of 3D buildings, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 05010158.
18. Pinho R., Bhatt C., Bento R. (2008). Modelling of the horizontal slab of a 3D irregular building for nonlinear static assessment, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 05010159.
19. Pinho R., Crowley H., Bommer J.J. (2008). Opensource software and treatment of epistemic uncertainties in earthquake loss modelling, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
20. Pinho R., Casarotti C. Monteiro R., Delgado R. (2008). Verification of Nonlinear Static Procedures for assessment of bridges subjected to transverse action, Proceedings of the Workshop on Nonlinear Static Methods for Design/Assessment of 3D Structures, Lisbon, Portugal.
21. Pinho R., Marques M., Monteiro R., Casarotti C. (2008). Using the Adaptive Capacity Spectrum Method for seismic assessment of irregular frames, Proceedings of the 5th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Catania, Italy, Paper no. 21.
22. Savoia M., Ferracuti B., Pinho R., Serpieri M. (2008). Force/Torque pushover method for plan irregular structures, Proceedings of the Workshop on Nonlinear Static Methods for Design/Assessment of 3D Structures, Lisbon, Portugal.
23. Teramo M.S., Crowley H., Lopez M., Pinho R., Cultrera G., Cirella A., Cocco M., Mai M., Teramo A. (2008). Modelling a repetition of the Messina 1908 earthquake, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 070023.
24. Vuran E., Bal I.E., Crowley H., Pinho R. (2008). Determination of equivalent SDOF characteristics of 3D dual RC structures, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. S15031.
25. Teramo, M.S., Crowley, H., Lopez, M., Pinho, R., Cultrera, G., Cirella, A., Cocco, M., Mai, M. and Teramo, A., (2008), “A damage scenario for the city of Messina, Italy, using displacementbased loss assessment, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
26. Fiorini E., Onida M., Borzi B., Pacor F., Luzi L., Meletti C., D’Amico V., Marzorati S., Ameri G. (2008). Microzonation study for an industrial site in southern italy. Proceedings of the Fourteenth World Conference in Earthquake Engineering, Beijing, China, paper no. 04020081.
27. Khan, Z.H., Cascante, G., El Naggar, M.H. and Lai, C.G. (2008). Evaluation of First Mode of Vibration, Base Fixidity, and Frequency Effects in ResonantColumn Testing, Proceedings of the Fourth Internationaln Symposium on Deformation Characteristics of Geomaterials, ISAtlanta, USA.
28. Rivera, J.A., Petrini, L., Lai, C.G. (2008). Do the Eurocode 8 ForceBased Design Provisions Lead to Safe and Predictable Seismic Response of RC Frame Structures?Proceedings of the 14th World Conference on Earthquake Engineering. Beijing, China, Paper Reference No. 08020031.
29. Pessina, V., Scandella, L., Corigliano, M., Franceschina, G., Lai, C.G. (2008). Seismic Risk Assessment of Italian Seaports: the Case of Ancona (Italy)Proceedings of the 14th World Conference on Earthquake Engineering. Beijing, China.
30. Pasquali, R., Lai, C.G., Corigliano, M. (2008). Seismic Analysis and Design of BlockworkWharves StructuresProceedings of the 14th World Conference on Earthquake Engineering. Beijing, China.
31. Ornthammarath, T., Corigliano, M., Lai, C.G. (2008). Artificial Neural Networks Applied to the Seismic Design of Deep Tunnels Proceedings of the 14th World Conference on Earthquake Engineering. Beijing, China, Paper Reference No. 04010088.
32. Bartolomei, A., Lai, C.G., Corigliano, M., Tinti, S. (2008). Earthquake and Tsunami Induced Damage to Seaport Structures in Italy: Application of GIS for Risk Reduction and Monitoring Proceedings of the 14th World Conference on Earthquake Engineering. Beijing, China, Paper Reference No. 09010106.
33. Ornthammarath, T., Lai, C.G., Menon, A., Corigliano, M., Dodagoudar, G., Gonavaram, K. (2008). Seismic Hazard Assessment at the Historical Site of Kancheepuram in South India Proceedings of the 14th World Conference on Earthquake Engineering. Beijing, China, Paper Reference No. 070132.
34. Boni, M.P., Compagnoni, M., Lai, C.G., Pergalani, F., Petrini, L., Petrini, V. (2008). On the Use of Artificial and Recorded Accelerograms for NonLinear Analyses of Buildings and Natural Slopes Proceedings the 14th World Conference on Earthquake Engineering. Beijing, China.
35. F. Dell’Acqua, D. Polli, P. Gamba, G. Lisini (2008). Remote sensing as a tool for vulnerability assessment, Proceedings of the 6th Int’l Workshop on Remote Sensing and Disaster Management Applications, Pavia, Italy.
36. Asinari M., Penna A., Magenes G. (2008). Comparison of existing strength criteria for confined masonry walls Proceedings of the 20th Jornadas Argentinas de Ingegnieria Estructural, Buenos Aires, Argentina, art. N. 066.
37. Calvi, G.M., R.Pinho and G. Magenes (2008). Traditional and innovative methods for seismic vulnerability assessment at large geographical scales, in The 1755 Lisbon earthquake: revisited, Springer, 197220.
38. Costa A. A., Penna A., Magenes G., Galasco A. (2008). Seismic performance assessment of AAC masonry buildings, Proceedings of the 14th WCEE, Beijing, China.
39. Fusco A E., Penna A., Prota A., Galasco A., Manfredi G. (2008). Seismic assessment of historical natural stone masonry buildings through nonlinear analysis, Proceedings of 14° WCEE, Beijing, China.
40. Goretti A., Bramerini F., Di Pasquale G., Dolce M., Lagomarsino S., Parodi S., Iervolino I., Verderame G.M., Bernardini A., Penna A., Rota M., Masi A. and Vona M. (2008). The Italian contribution to the USGS pager project, Proceedings of the 14th WCEE, Beijing, China, Paper No. 21.
41. Magenes, G., Morandi, P., Penna, A.. (2008). Experimental InPlane Cyclic Response of Masonry Walls with Clay Units, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper ID: 12030095.
42. Magenes, G., Morandi, P., (2008). Some issues on seismic design and assessment of masonry buildings based on linear elastic analysis, Proceedings of the Michael John Nigel Priestley Symposium, IUSS Press, Pavia, Italy, pp. 8394.
43. Magenes G., Morandi P., Penna A., (2008), “Inplane Cyclic Tests of Calcium Silicate Masonry Walls, Proceedings of the XIV International Brick and Block Masonry Conference, Sidney, Australia, pp.706715.
44. Menon, A., Magenes, G. (2008). Accounting for inelastic response of URM buildings in the acceleration demands to faceloaded walls, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, paper no.: 05040077.
45. Morandi, P., Magenes, G. (2008). Seismic Design of Masonry Buildings: Current Procedures and New Perspectives, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper ID: S14056.
46. Ornthammarath, T., Lai, C.G., Menon, A., Corigliano, M., Dodagoudar, G.R., Gonavaram, K. K. (2008). Seismic hazard of the historical centre of Kancheepuram in southern India, Proceedings of the 4th World Conference on Earthquake Engineering, Beijing, China, paper no.: 070132.
47. Penna A., Magenes G., Calvi G.M., Costa A.A. (2008), “Seismic performance of AAC infill and bearing walls with different reinforcement solutions, Proceedings of the 14th IB2MAC, Sydney, Australia, CDROM paper n. 194.
48. Ronald, A. J., Prasad, A.M., Menon, D., Menon, A., Magenes, G. (2008). Seismic vulnerability of south Indian temples, Proceedings of the 6th Structural Engineering Convention, SERC, Chennai, IIT Madras and Anna University, Chennai, India.
49. Rota M., Penna A., Magenes G. and Strobbia C.L. (2008). Observed Seismic Vulnerability of Italian Buildings, Proceedings of the Seismic Engineering International Conference commemorating the 1908 Messina and Reggio Calabria Earthquake (MERCEA’08).
50. Rota M., Penna A., Strobbia C.L. and Magenes G. (2008). Direct derivation of fragility curves from Italian postearthquake survey data, Proceedings of the 14th WCEE, Beijing, China, Paper No. 148.
51. Rota M., Penna A. and Magenes G. (2008). A procedure for deriving analytical fragility curves for masonry buildings, Proceedings of the 14th WCEE, Beijing, China, Paper No. 149.
52. G. Attanasi, F. Auricchio, C. Crosti, G.L. Fenves. (2008). An innovative isolation bearing with shape memory alloys, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
53. Curone D., Dudnik G., Loriga G., Magenes G., Secco E. L., Tognetti A., Bonfiglio A. (2008). Smart Garments for Emergency Operators: Results on Laboratory and Field Tests, Proceedings of the 30th Annual Int Conf of the IEEE Eng in Medicine and Biology Society EMBC,
54. Bolognini D., Borzi B., Pinho R. (2008). Simplified PushoverBased Vulnerability Analysis of Traditional Italian RC precast structures, Proceedings of the 14th WCEE, Beijing, China, ID09010133.
55. Bolognini D., Nascimbene R., Bellotti D. (2008). Seismic Behaviour of Reinforced Concred Precast Traditional Italian Frames and Subassemblies, Proceedings of the 14th WCEE, Beijing, China, 1217 ID12030096.
56. Mpampatsikos V., Nascimbene R. and Petrini L. (2008). Some considerations about the EUROCODE 8 R.C. frame building assessment procedure, Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
57. Bellotti D., Bolognini D., Dacarro F., Nascimbene R. (2008). Seismic design of traditional industrial steel and RC precast structures: a comparative analysis, Proceedings of the 5th European Conference on Steel and Composite Structures, Eurosteel 2008, Graz, Austria, ID393.

 

Articoli conferenze nazionali

1. Ferracuti B., Pinho R., Savoia M. (2008). Statistical validation of nonlinear pushover methods by incremental dynamic analyses, Proceedings of the RELUIS Conference on Assessment and Mitigation of Seismic Vulnerability of Existing Reinforced Concrete Structures, Rome, Italy.
2. Ferracuti B., Savoia M., Pinho R., Serpieri M. (2008). Seismic analysis of irregular RC structures by 3D force/torque pushover method, Proceedings of the RELUIS Conference on Assessment and Mitigation of Seismic Vulnerability of Existing Reinforced Concrete Structures, Rome, Italy.
3. Lanese I., Nascimbene R., Pavese A., Pinho R. (2008). Numerical simulations of an infilled 3D frame in support of a shakingtable testing campaign, Proceedings of the RELUIS Conference on Assessment and Mitigation of Seismic Vulnerability of Existing Reinforced Concrete Structures, Rome, Italy. (in Italian).
4. Pinho R. (2008). Adaptive and nonadaptive nonlinear static analysis of irregular structures, Proceedings of the RELUIS Conference on Assessment and Mitigation of Seismic Vulnerability of Existing Reinforced Concrete Structures, Rome, Italy. (in Italian).
5. Marzorati S., Fiorini E., Ameri G., Onida M., Pacor F. (2008), “Rapporti spettrali HVSR in aree densamente industrializzate: ricostruzione di una superficie pleistocenica profonda al di sotto del polo petrolchimico di Priolo Gargallo (SR), Atti del 27° Convegno Nazionale GNGTS, Trieste, Italia.
6. Bartolomei, A., Corigliano, M., Lai, C.G. (2008), “Seismic Risk Assessment of Italian Seaports Using GIS, Proceedings of the Seismic Engineering International Conference Commemorating the 1908 Messina and Reggio Calabria Earthquake. MERCEA, Reggio Calabria, Italy.
7. Comina, C., Corigliano, M., Foti, S., Lai, C.G., Lancellotta, R., Leuzzi, F., Li Destri Nicosia, G., Paolucci, R. Pettiti, A., Psarropoulos, P.N. and Zanoli, O. (2008), “Parametric Study of Cantilever Walls Subjected to Seismic Loading, Proceedings of the Seismic Engineering International Conference Commemorating the 1908 Messina and Reggio Calabria Earthquake. MERCEA, Reggio Calabria, Italia.
8. Dell’Acqua F. (2008). Stima del danno e della vulnerabilità sismica con il telerilevamento satellitare Proceedings of the 5th International Conference of Applied Geophysics for Engineering, Messina, Italy.
9. D. Asprone, A. Prota, G. Manfredi, F. Auricchio, A. Reali, G. Sangalli. (2008). Error evaluation in approximation of derivatives using Smoothed Particle Hydrodynamics method, Memorie del XVII Convegno Italiano di Meccanica Computazionale.
10. S. Pugliese, M. Conti, F. Auricchio, S. Demertzis. (2008). Aortic valve mechanical behaviour through finite element analysis, Proceedings of the Italian National Congress of Bioengineering, editor: Patron.
11. Curone D., Bertolotti G.M., Cristiani A., Secco E. L., Magenes G. (2008) , “A RealTime and SelfCalibrating Algorithm for Human Posture and Activity Assessment, Atti del Primo Congresso Nazionale di Bioingegneria, GNB.
12. Bellotti D., De Luca R., Bolognini D., Nascimbene R. (2008), “Risposta a carichi ciclici di telai prefabbricati tradizionali di tre piani in c.a., Atti del 17° Congresso C.T.E., 5 Roma, Italia.
13. Marinini L., Spatti P., Riva P., Nascimbene R., Izzo L., Maffioletti M., Spadavecchia A. (2008), “Sviluppo di una connessione dissipativa per strutture prefabbricate, Atti del 17° Convegno CTE, Roma, Italia.
14. Mpampatsikos V., Nascimbene R. and Petrini L. (2008). RC frame existing building assessment: considerations and suggestions about EC8 and OPCM 3431 procedures, Atti del Convegno Reluis “Valutazione e riduzione della vulnerabilità sismica di edifici esistenti in c.a., Roma, Italia.
15. Lanese I., Nascimbene R., Pavese A. e Pinho R. (2008), “Simulazioni numeriche di un telaio 3D tamponato in supporto di prove dinamiche su tavola vibrante, Atti del Convegno Reluis “Valutazione e riduzione della vulnerabilità sismica di edifici esistenti in c.a., Roma, Italia.

 

Libri

1. Bento R., Pinho R. (Eds.) (2008) Nonlinear Static Methods for Design/Assessment of 3D Structures, IST Press, Lisbon, Portugal, in press.
2. Lai, C.G., Foti, S., Rota, M. (2008) Design Seismic Action and Adequacy Requirements of Construction Sites, Series of Manuals of Aseismic Design, Vol. 6, IUSS Press, pp. 312. Expected publication (in Italian).

 

Rapporti di Ricerca

1. Pietra D., Calvi G.M., Pinho R. (2008). Displacementbased seismic design of isolated bridges, Research Report ROSE2008/01, IUSS Press, Pavia, Italy.
2. Ceresa P., Petrini L., Pinho R. (2008). A fibre flexureshear Model for Cyclic nonlinear behaviour of RC Structural Elements, Research Report ROSE 2008/07, IUSS Press, Pavia, Italy, pp. 329.
3. Teramo, A., Bottari, A., Termini, D., Teramo, M.A., Crowley, H., Pinho, R., Lopez, M., Cultera, G., Cocco, M., Cirela, A., Herrero, A., Piatanesi, A., Lorito, S., Romano, F., Mai, M., Salvatore, W. (2008), Dal terremoto di Messina 1908 alla valutazione di scenari di danno nel 2008. From the 1908 Messina earthquake to scenario damage assessment in 2008, IUSS Press, Pavia, Italy.
4. Lai, C.G., Strobbia, C., Dall’Ara, A. (2008). Design Earthquake and Stochastic Seismic Response Analyses in Tuscan Territories of Garfagnana and Lunigiana Research Report prepared for European Centre for Training and Research in Earthquake Engineering. EUCENTRE Report No. 2008/01. IUSS Press., Pavia, pp. 210 (in Italian).
5. Magenes G., Morandi P., Penna, A., (2008). Test results on the behaviour of masonry under static cyclic in plane lateral loads, ESECMaSE project, Department of Structural Mechanics, University of Pavia, report RS01/08.
6. Menon, A. and Magenes, G. (2008). Outofplane Seismic Response of Unreinforced Masonry: Definition of Seismic Input, Research Report ROSE2008/04, IUSS Press, Pavia, pp. 269.
7. Rota M., Penna A., Strobbia C. and Magenes G. (2008). Derivation of empirical fragility curves from Italian damage data, Research Report No. ROSE2008/08, IUSS Press, Pavia, pp. 240.
8. Bolognini D., Nascimbene R. (2008). Valutazione NumericoSperimentale della Risposta Sismica di Strutture Prefabbricate in c.a. e Sottosistemi Strutturali, EucentreDPC, Progetto Esecutivo 20052008, Progetto di Ricerca n.6.

Articoli su rivista internazionale

1. Artioli E., Auricchio F., da Veiga L.B. (2007). Second-order accurate integration algorithms for von-Mises plasticity with a nonlinear kinematic hardening mechanism, Computer Methods in Applied Mechanics & Engineering, Vol. 196, pp. 1827-1846.
2. Artioli E., Auricchio F., da Veiga L.B. (2007). Generalized midpoint integration algorithms for J2 plasticity with linear hardening, International Journal for Numerical Methods in Engineering, Vol. 72, pp. 422-463.
3. Auricchio F., da Veiga L.B., Buffa A., Lovadina C., Reali A., Sangalli G. (2007). A fully locking-free isogeometric approach for plane linear elasticity problems: a stream function formulation, Computer Methods in Applied Mechanics and Engineering, Vol. 197, pp. 160-172.
4. Auricchio F., Fugazza D., DesRoches R. (2007). A 1D rate- dependent viscous constitutive model for superelastic shape- memory alloys: formulation and comparison with experimental data, Smart Materials & Structures, Vol. 16, pp. S39-S50.
5. Auricchio F., Reali A. (2007). A phenomenological one-dimensional model describing stress-induced solid phase transformation with permanent inelasticity, Mechanics of Advanced Materials & Structures, Vol. 14, pp. 43-55.
6. Auricchio F., Reali A., Stefanelli U. (2007). A three-dimensional model describing stress-induced solid phase transformation with permanent inelasticity, International Journal of Plasticity, Vol. 23, pp. 207-226.
7. Bazilevs Y., Calo V.M., Cottrell J.A., Hughes T.J.R., Reali A., Scovazzi G. (2007). Variational Multiscale Residual-based Turbulence Modeling for Large Eddy Simulation of Incompressible Flows, Computer Methods in Applied Mechanics and Engineering, Vol. 197, pp. 173-201.
8. Casarotti C., Pinho R. (2007). An adaptive capacity spectrum method for assessment of bridges subjected to earthquake action, Bulletin of Earthquake Engineering, Vol. 5, No. 3, pp. 377-390.
9. Ceresa P., Petrini L., Pinho R. (2007). Flexure-shear fibre beam-column elements for modelling frame structures under seismic loading – state of the art, Journal of Earthquake Engineering, Vol. 11, Special No. 1, pp. 46-88.
10. Chen K.-S., Crawford M., Gamba P., Smith J.S. (2007). Introduction for the special issue on Remote Sensing for Major Disaster Prevention, Monitoring, and Assessment, IEEE Trans. on Geoscience and Remote Sensing, Vol. 45, no. 6, pp. 1515-1518.
11. Cottrell J.A., Hughes T.J.R., Reali A. (2007). Studies of refinement and continuity in isogeometric structural analysis, Computer Methods in Applied Mechanics and Engineering, Vol. 196, pp. 4160-4183.
12. Gamba P., Dell’Acqua F., Trianni G. (2007). Rapid damage detection in Bam area using multi-temporal SAR and exploiting ancillary data, IEEE Trans. on Geoscience and Remote Sensing, Vol. 45, No. 6, pp 1582-1589.
13. Gamba P., Dell’Acqua F., Lisini G., Trianni G. (2007). Improved VHR urban area mapping exploiting object boundaries, IEEE Trans. on Geoscience and Remote Sensing, Vol. 45, No. 8, pp. 2676-2682.
14. Gavridou S., Pinho R., Crowley H., Calvi G.M., Montaldo V., Meletti C., Stucchi M. (2007). Preliminary study on the impact of the introduction of an updated seismic hazard model for Italy, Journal of Earthquake Engineering, Vol. 11, Special Issue 1, pp. 89-118.
15. Grant D.N., Bommer J.J., Pinho R., Calvi G.M., Goretti A., Meroni F. (2007). A prioritization scheme for seismic intervention in school buildings in Italy, Earthquake Spectra, Vol. 23, No. 2, pp. 291-314.
16. Meza-Fajardo K.C., Lai C.G. (2007). Explicit causal relations between material damping ratio and phase velocity from exact solutions of the dispersion equations of linear viscoelasticity, Geophysical Journal International, Vol. 171, No. 3, pp. 1247-1257.
17. McCormick J., DesRoches R., Fugazza D., Auricchio F. (2007). Seismic assessment of concentrically-braced steel frames with shape memory alloy braces, ASCE Journal of Structural Engineering, Vol. 133, pp. 862-870.
18. Pampanin S., Bolognini D., Pavese A. (2007). Performance-based seismic retrofit strategy for existing reinforced concrete frame systems using FRP composites, Journal of Composites for Construction, Vol. 11, No. 2, pp. 211-226.
19. Pinho R., Casarotti C., Antoniou S. (2007). A comparison of single-run pushover analysis techniques for seismic assessment of bridges, Earthquake Engineering and Structural Dynamics, Vol. 36, No. 10, pp. 1347-1362.

 

Articoli su rivista nazionale

1. Calvi G.M., Filippetto M., Bolognini D., Nascimbene R. (2007). Strutture prefabbricate in c.a. in zona sismica: stato della pratica costruttiva Italiana e principali problematiche di progettazione, Ingegneria Sismica, No. 1, pp. 41-56.
2. Lai C.G., Meza-Fajardo K.C. (2007). On the implications of the principle of physical causality in the propagation of seismic waves in geomaterials, Rivista Italiana di Geotecnica, Anno XLI, No. 2, pp. 10-25.

 

Libri

1. Manfredi G., Masi A., Pinho R., Verderame G., Vona. M. (2007) Valutazione di Edifici Esistenti in Cemento Armato, IUSS Press, Pavia, Italy, in press.
2. Calvi G.M., Kawashima K. (Eds.) (2007) Seismic Bridge Design and Retrofit – Structural Solutions, Bulletin no. 39, fib, Lausanne, Switzerland.
3. Priestley M.J.N., Calvi G.M., Kowalsky M.J. (2007) Displacement Based Seismic Design of Structures, IUSS Press, Pavia, Italy.

 

Capitoli di libro

1. Auricchio F., Reali A., Stefanelli U. (2007). A phenomenological 3D model describing stress-induced solid phase transformations with permanent inelasticity, in Topics on Mathematics for Smart Systems, B. Miara, G. Stavroulakis, V. Valente, World Scientific, London, UK.
2. Calvi G.M. (2007). Design for enhanced control of damage, in Seismic Bridge Design and Retrofit – Structural Solutions, Bulletin no. 39, fib, Lausanne, Switzerland.
3. Pinho R. (2007). Nonlinear dynamic analysis of structures subjected to seismic action, in Advanced Earthquake Engineering Analysis, A. Pecker (Ed.), CISM-Springer Verlag, Udine, Italy.
4. Pinho R. (2007). Using pushover analysis for assessment of buildings and bridges, in Advanced Earthquake Engineering Analysis, A. Pecker (Ed.), CISM-Springer Verlag, Udine, Italy.
5. Goretti A., Di Pasquale G., Rota M. (2007). Post-earthquake building typification, in European Manual for In-situ Assessment of Important Existing Structures, R. Flesch (Ed.), IUSS Press, Pavia, Italy.

  

Articoli conferenze internazionali

1. Ahmad I., El Naggar M.H., Khan A.N., Lai C.G. (2007). Use of ANN in predicting the kinematic seismic response of piled-foundations, Proceedings of 4th International Conference on Geotechnical Earthquake Engineering (ICGEE 2007), Thessaloniki, Greece, Paper no. 1661.
2. Artioli E., Auricchio F., da Veiga L.B. (2007). Double-step midpoint methods for J2 plasticity with nonlinear hardening, Proceedings of the 9th Conference on Computational Plasticity IX – Fundamentals and Applications, Barcelona, Spain.
3. Artioli E., Auricchio F., da Veiga L.B. (2007). A survey on recent developments in second-order integration methods for J2 plasticity model, Proceedings of 2007 EUROSIM Conference, Federation of European Simulation Societies, Ljubljana, Slovenia.
4. Auricchio F., Reali A., Stefanelli U. (2007). Modeling and numerical solutions for shape-memory materials, Proceedings of the MFO Workshop: Analysis and Numerics for Rate-Independent Processes, Oberwolfach, Germany.
5. Bal I.E., Crowley H., Pinho R. (2007). Displacement-based earthquake loss assessment for an earthquake scenario in Istanbul, Proceedings of the International Symposium on Earthquake Loss Estimation for Turkey (HAZTURK-2007), Istanbul, Turkey.
6. Bazilevs Y., Calo V.M., Cottrell J.A., Hughes T.J.R., Reali A., Scovazzi G. (2007). Variational multiscale residual-driven turbulence modeling for large eddy simulation of incompressible flow, Proceedings of the ECCOMAS Thematic Conference on Multi-scale Computational Methods for Solids and Fluids, Paris – Cachan, France.
7. Bonfiglio A., Carbonaro N., Chuzel C., Curone D., Dudnik G., Germagnoli F., Hatherall D., Koller JM., Lanier T., Loriga G., Luprano J., Magenes G., Paradiso R., Tognetti A., Voirin G., Waite R. (2007). Managing catastrophic events by wearable mobile systems, Proceedings of the Mobile Response Conference, St. Augustin, Germany.
8. Borg R.C., Lai C.G. (2007). Seismic performance, analysis and design of wharf structures: A comparison of worldwide typologies, Proceedings of the 4th International Conference on Geotechnical Earthquake Engineering (ICGEE 2007), Thessaloniki, Greece, Paper no. 1760.
9. Calvi G.M., Filippetto M., Bolognini D., Nascimbene R. (2007). Seismic design and retrofit of traditional Italian RC precast structure, Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2007), Crete, Greece, Paper no. 1078.
10. Casarotti C., Petrini L., Strobbia C. (2007). Calibration of non linear model parameters via inversion of experimental data and propagation of uncertainties in seismic fibre element analysis, Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2007), Crete, Greece.
11. Corigliano M., Lai C.G., Barla G. (2007). Seismic vulnerability of rock tunnels using fragility curves, Proceedings of the 11th Congress of the International Society for Rock Mechanics (ISRM 2007), Lisbon, Portugal.
12. Corigliano M., Scandella L., Barla G., Lai C. G., Paolucci R. (2007). Seismic analysis of deep tunnels in weak rock: A case study in Southern Italy, Proceedings of the 4th International Conference on Geotechnical Earthquake Engineering (ICGEE 2007), Thessaloniki, Greece, Paper no. 1616.
13. Cottrell J.A., Hughes T.J.R., Reali A., Sangalli G. (2007). Isogeometric discretizations in structural dynamics and wave propagation, Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (Compdyn, 2007), Crete, Greece.
14. Crowley H., Bommer J.J., Stafford P. (2007). Recent developments in the treatment of ground-motion variability in earthquake loss models, Proceedings of the International Symposium on Earthquake Loss Estimation for Turkey (Hazturk, 2007), Istanbul, Turkey.
15. Curone D., Dudnik G., Loriga G., Luprano J., Magenes G., Paradiso R., Tognetti A., Bonfiglio A., “Smart garments for safety improvement of emergency/disaster operators, Proceedings of the IEEE Engineering in Medicine and Biology Society Conference, Lyon, France.
16. Dell’Acqua F., Gamba P., Lisini G. (2007). A semi-automatic high resolution SAR data interpretation procedure, Proceedings of the 2007 Photogrammetric Image Analysis Conference, Munich, Germany.
17. Ferracuti B., Pinho R., Savoia M., Francia R. (2007). Validation of nonlinear pushover analyses by Statistical Incremental Dynamic Analysis (S-IDA), Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (Compdyn, 2007), Crete, Greece.
18. Ferracuti B., Savoia M., Pinho R., Francia R., Antoniou S. (2007). Pushover analysis of FRP-retrofitted existing RC frame structures, Proceedings of the 8th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, Greece.
19. Fragiadakis M., Pinho R., Antoniou S. (2007). Modelling inelastic buckling of reinforcing bars under earthquake loading, Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2007), Crete, Greece.
20. Gamba P., Dell’Acqua F., Lisini G. (2007). Raster to vector in 2D urban data, Proceedings of the 2007 Urban Remote Sensing Joint Event, Paris, France.
21. Gamba P., Dell’Acqua F., Lisini G. (2007). A comparison of various geometrical feature for damage assessment in VHR urban imagery, Proceedings of the 2007 EGU General Assembly, Vienna, Austria, Vol. 9, Paper no. 4259.
22. Gamba P., Dell’Acqua F., Lisini G., Trianni G. (2007). Exploiting spectral and spatial analysis for urban area data interpretation, Proceedings of the 27th EARSEL Symposium, Bolzano, Italy.
23. Gamba P., Dell’Acqua F., Odasso L. (2007). Object-oriented building damage analysis in VHR optical satellite images of the 2004 Tsunami over Kalutara, Sri Lanka, Proceedings of the 2007 Urban Remote Sensing Joint Event, Paris, France.
24. Gamba P., Dell’Acqua F., Stasolla M. (2007). Toward the definition of a semi-automated building inventory tool and its use for earthquake damage assessment, Proceedings of the 2007 EGU General Assembly, Vienna, Austria, Vol. 9, Paper no. 92.
25. Gamba P., Dell’Acqua F., Trianni G. (2007). GIS and remote sensing for disaster management of urban areas, Proceedings of the 2007 Urban Remote Sensing Joint Event, Paris, France.
26. Gamba P., Dell’Acqua F., Trianni G. (2007). Satellite SAR and human settlement detection, Proceedings of the 2007 Urban Remote Sensing Joint Event, Paris, France.
27. Gamba P., Trianni G. (2007). Boundary- adaptive MRF classification of VHR images, Proceedings of the 2007 International Geosciences and Remote Sensing Symposium (IGARSS’07), Barcelona, Spain.
28. Gencturk B., Kilic S.A., Erdik M.O., Pinho R. (2007). Seismic behaviour of the Titus stone arch bridge, Proceedings of the 2007 ASCE Structures Conference, Long Beach, California, USA.
29. Juirnarongrit T., Kawamata Y., Blandon C.A., Ashford S.A., Restrepo J.I., Yin P., Jaradat O.A., Weismair M., Lai C.G. (2007). Full-scale testing of piles in wharf-foundation-dike systems, Proceedings of the 11th International Conference on Ports and Harbor Facilities (PORTS 2007), San Diego, USA, Paper no. 16915.
30. Lagomarsino S., Galasco A., Penna A. (2007). Nonlinear macro-element dynamic analysis of masonry buildings, Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2007), Crete, Greece.
31. Lai C.G., Corigliano M., Bhuiyan M.T.R. (2007). Comparison of real vs. artificial accelerograms in 1D site response analysis, Proceedings of the 14th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE 2007), Madrid, Spain.
32. Pavese A., Nascimbene R., Marazzi F., Petrini L. (2007). Comparison between experimental and numerical models of a full scale R.C. three-storey structure, Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2007), Crete, Greece.
33. Penna A., Calvi G.M., Bolognini D. (2007). Design of masonry structures with bed joint reinforcement, Proceedings of the International Seminar on Masonry Walls – Innovation and current possibilities, Lisbon, Portugal.
34. Pinho R., Bommer J.J. (2007). Sensitivity and uncertainty in earthquake loss models: a case for open-source software, Proceedings of the 1st International Workshop on Open-source Risk Software, California Institute of Technology, Pasadena, California, USA.
35. Pinho R., Casarotti C., Monteiro R. (2007). An adaptive capacity spectrum method and other nonlinear static procedures applied to the seismic assessment of bridges, Proceedings of the 1st US-Italy Workshop on Seismic Design and Assessment of Bridges, Pavia, Italy.
36. Priestley M.J.N., Calvi G.M. (2007). Displacement-based design of bridges, Proceedings of the 1st US-Italy Workshop on Seismic Design and Assessment of Bridges, Pavia, Italy.
37. Priestley M.J.N., Calvi G.M., Petrini L., Maggi C. (2007). Effects of damping modelling on results of time-history analysis of RC bridges, Proceedings of the 1st US-Italy Workshop on Seismic Design and Assessment of Bridges, Pavia, Italy.
38. Rajeev P., Franchin P., Lai C.G., Pinto P. (2007). Numerical modelling of seismic response of cantilever earth-retaining structures, Proceedings of the 4th International Conference on Geotechnical Earthquake Engineering (ICGEE 2007), Thessaloniki, Greece, Paper no. 1269.
39. Stasolla M., Gamba P. (2007). Exploiting spatial patterns for informal settlement detection in arid environments using spaceborne optical data, Proceedings of the 2007 Photogrammetric Image Analysis Conference, Munich, Germany.
40. Strasser F.O., Bal I.E., Bommer J.J., Cagnan Z., Crowley H., Erdik M., Goula X., Irizarry J., Lindholm C., Lucantoni A., Sabetta F., Sesetyan K. (2007). A comparative study of European earthquake loss estimation tools for an earthquake scenario in Istanbul, Proceedings of the International Symposium on Earthquake Loss Estimation for Turkey (HAZTURK-2007), Istanbul, Turkey.

 

Articoli conferenze nazionali

1. Borzi B., Dall’Ara A., Lai C.G., Strobbia C., Ferrini M. (2007). Dynamic-compatible pseudo-static analysis of a natural slope, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 372.
2. Borzi B., Pinho R., Crowley H. (2007). SP-BELA: a mechanics-based method based on simplified pushover analysis for seismic vulnerability assessment, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 160. (in Italian)
3. Calvi G.M., Pinho R., Goretti A., Crowley H., Colombi M., Grant D.N. and Bommer J.J. (2007). A prioritization scheme for seismic intervention in school buildings in Italy, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 181. (in Italian)
4. Calvi G.M., Priestley M.J.N. (2007). Isolation and added damping in displacement based design, Proceedings of the 16th Mexican Conference on Earthquake Engineering, Keynote Lecture, Ixthapa, Mexico.
5. Calvi G.M., Priestley M.J.N. (2007). Displacement based design of masonry structures, Proceedings of the 2nd Workshop on Design for Rehabilitation of Masonry Structures (WONDERmasonry 2), Ischia, Italy.
6. Casarotti C., Bruno V.I., Pinho R. (2007). An Adaptive Capacity Spectrum Method for the assessment of reinforced concrete buildings, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 185. (in Italian)
7. Ceccoli C., Dallavalle G., Trombetti T., Pavese A., Malavolta D., Gasparini G., Silvestri S. (2007). Interpretazione del comportamento sotto carico ciclico orizzontale di setti strutturali in calcestruzzo realizzati medianti specifici casseri a perdere, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy.
8. Ceresa P., Petrini L. (2007). Sviluppo di un elemento finito di trave a fibre per la modellazione della risposta a taglio-flessione di telai soggetti a carico sismico, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 157.
9. Corigliano M., Scandella L., Barla G., Lai C.G., Paolucci R. (2007). Aspetti progettuali nell’analisi sismica di gallerie profonde, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 373.
10. Correia A.A., Almeida J.P., Pinho R. (2007). Comparison between equilibrium- and displacement-based element formulations for nonlinear analysis for RC framed structures, Proceedings of the 7th Portuguese Conference on Seismology and Earthquake Engineering, Porto, Portugal. (in Portuguese)
11. Costa A.A., Penna A., Calvi G.M. (2007). Seismic performance of autoclaved aerated concrete (AAC) buildings: experimental tests, numerical simulation and building response, Proceedings of the 7th Portuguese Conference on Seismology and Earthquake Engineering, Porto, Portugal.
12. Costa A.A., Penna A., Magenes G. (2007). Experimental tests on masonry panels subjected to in-plane loads – state-of-art and new proposals, Proceedings of the 7th Portuguese Conference on Seismology and Earthquake Engineering, Porto, Portugal.
13. Crowley H., Pinho R., Faravelli M., Montaldo V., Meletti C., Calvi G.M., Stucchi M. (2007). Influence of new Italian seismic hazard maps on seismic risk assessment in Italy, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 163. (in Italian)
14. Ferracuti B., Pinho R., Savoia M., Francia R. (2007). Validation of nonlinear pushover analyses by Statistical Incremental Dynamic Analysis (S-IDA), Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 234.
15. Galasco A., Lagomarsino S., Penna A. (2007). Analisi pushover evolutiva di edifici in muratura, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy.
16. Galasco A., Penna A. (2007). Valutazione della risposta sismica di edifici irregolari in muratura, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy.
17. Gentile R., Lai C.G. (2007). Indagine sulla vulnerabilità sismica delle banchine portuali Italiane, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy.
18. Menon A., Magenes G. (2007). Definition of seismic input for out-of-plane response of URM, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 379.
19. Morandi P., Magenes G. (2007). Nuove prospettive per la progettazione sismica degli edifici in muratura, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy.
20. Penna A., Costa A.A., Calvi G.M. (2007). Prestazioni sismiche del calcestruzzo cellulare, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy.
21. Pinho R. (2007). Using basic principles of mechanics of materials to assess earthquake-induced losses of large geographical areas, Proceedings of the 7th Portuguese Conference on Seismology and Earthquake Engineering, Keynote Lecture, Porto, Portugal.
22. Pinho R. (2007). Seismic assessment of buildings and bridges using nonlinear static procedures, Proceedings of the 16th Peruvian Congress of Civil Engineering, Keynote Lecture, Arequipa, Peru.
23. Pinho R. (2007). Displacement-based adaptive pushover, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 184. (in Italian).
24. Pinho R., Bento R., Bhatt C., Casarotti C. (2007). Adaptive approaches for assessment of structures subjected to earthquake actions, Proceedings of the 7th Portuguese National Conference on Seismology and Earthquake Engineering, Porto, Portugal. (in Portuguese).
25. Pinho R., Crowley H., Angel J.P., Gervasio M. (2007). Linear static and dynamic methods presented in OPCM 3274 – brief review and possible revision, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 161. (in Italian).
26. Pinho R., Crowley H., Bommer J.J., Colombi M. (2007). Using displacement-based earthquake loss assessment in the selection of seismic code design levels, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 183. (in Italian).
27. Pinho R., Quaglini L. (2007). Employing fibre modelling to simulate the response of a 7-storey full-scale building slice tested under dynamic conditions, Proceedings of the 7th Portuguese Conference on Seismology and Earthquake Engineering, Porto, Portugal. (in Portuguese).
28. Priestley M.J.N., Calvi G.M. (2007). Displacement-based seismic design – application to ductile structures, Proceedings of the 16th Mexican Conference on Earthquake Engineering, Keynote Lecture, Ixthapa, Mexico.
29. Priestley M.J.N., Calvi G.M., Kowalsky M.J. (2007). Displacement-based seismic design of concrete structures, Proceedings of the 10th Spanish Conference on Earthquake Engineering, Keynote Lecture, Girona, Spain.
30. Priestley M.J.N., Calvi G.M., Kowalsky M.J. (2007). Displacement-based seismic design of concrete structures, Proceedings of the 2007 Australian Conference on Earthquake Engineering, Keynote Lecture, Adelaide, Australia.
31. Priestley M.J.N., Calvi G.M., Kowalsky M.J. (2007). Displacement-based seismic design of structures, Proceedings of the 2007 New Zealand Conference on Earthquake Engineering, Keynote Lecture, Palmerston North, New Zealand.
32. Priestley M.J.N., Calvi G.M., Kowalsky M.J. (2007). Displacement-based seismic design of concrete structures, Proceedings of the 6th Turkish Conference on Earthquake Engineering, Keynote Lecture, Istanbul, Turkey.
33. Priestley M.J.N., Calvi G.M., Kowalsky M.J. (2007). Conceptual seismic design of structures: a displacement-based approach, Proceedings of the 4th CDS Specialty Conference on the Conceptual Approach to Structural Design, Venezia, Italy.
34. Rota M., Dall’Ara A., Strobbia C., Penna A. (2007). Mappe di rischio sismico tipologico per il costruito italiano, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy.
35. Traversa P., Lai C.G., Strobbia C. (2007). Feasibility study of an Early Warning System in Northern Italy, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 375.
36. Trombetti T., Pavese A. (2007). Interpretazione del comportamento sotto carico ciclico orizzontale di setti strutturali in calcestruzzo realizzati mediante specifici casseri a perdere, Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy.

 

Rapporti di ricerca

1. Bal I.E., Crowley H., Pinho R., Gulay F.G. (2007). Structural characteristics of Turkish RC building stock in Northern Marmara Region for loss assessment applications, Research Report ROSE-2007/03, IUSS Press, Pavia, Italy.

Articoli su rivista internazionale

1. Artioli E., Auricchio F., da Veiga L.B. (2006). A novel ‘optimal’ exponential-based integration algorithm for von-Mises plasticity with linear hardening: Theoretical analysis on yield consistency, accuracy, convergence and numerical investigations, International Journal for Numerical Methods in Engineering, Vol. 67, pp. 449-498.
2. Auricchio F., Fugazza D., DesRoches R. (2006). Numerical and experimental evaluation of the damping properties of shape-memory alloys, Journal of Engineering Materials and Technology-Transactions of the ASME, Vol. 128, pp. 312-319.
3. Auricchio F., Fugazza D., DesRoches R. (2006). Earthquake performance of steel frames with nitinol braces, Journal of Earthquake Engineering, Vol. 10, Special Issue 1, pp. 45-66.
4. Auricchio F., Sacco E., Vairo G. (2006). A mixed FSDT finite element for monoclinic laminated plates, Computers & Structures, Vol. 84. pp. 624-639.
5. Bird J.F., Bommer J.J., Crowley H., Pinho R. (2006). Modelling liquefaction-induced building damage in earthquake loss estimation, Soil Dynamics and Earthquake Engineering, Vol. 26, No. 1, pp. 15-30.
6. Bommer J.J., Crowley H. (2006). The influence of ground motion variability in earthquake loss modelling, Bulletin of Earthquake Engineering, Vol. 4, No. 3, pp. 231-248.
7. Calvi G.M., Pinho R., Magenes G., Bommer J.J., Restrepo-Vèlez L.F., Crowley H. (2006). The development of seismic vulnerability assessment methodologies for variable geographical scales over the past 30 years, ISET Journal of Earthquake Engineering Technology, Vol. 43, No. 3, pp. 75-104.
8. Crowley H., Bommer J.J. (2006). Modelling seismic hazard in earthquake loss models with spatially distributed exposure, Bulletin of Earthquake Engineering, Vol. 4, No. 3, pp. 249-273.
9. Casarotti C., Pinho R. (2006). Seismic response of continuous span bridges through fibre-based finite element analysis, Journal of Earthquake Engineering and Engineering Vibration, Vol. 5, No. 1, pp. 119-131.
10. Cottrell J.A., Reali A., Bazilevs Y., Hughes T.J.R. (2006). Isogeometric analysis of structural vibrations, Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 5257-5296.
11. Lo Presti D.C.F., Lai C.G., Puci, I. (2006). ONDA: Computer code for nonlinear seismic response analyses of soil deposits, ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 132, No. 2, pp. 223-236.
12. McCormick J., DesRoches R., Fugazza D., Auricchio F. (2006). Seismic vibration control using superelastic shape memory alloys, Journal of Engineering Materials & Technology – Transactions of the ASME, Vol. 128, pp. 294-301.
13. Nanni F., Auricchio F., Sarchi F., Forte G., Gusmano G. (2006). Self-sensing CF-GFRP rods as mechanical reinforcement and sensors of concrete beams, Smart Materials & Structures, Vol.15, Special Issue 1, pp. 182-186.
14. Negri M., Gamba P., Lisini G., Tupin F. (2006). Junction-aware extraction and regularization of urban road networks in high resolution SAR images, IEEE Trans. on Geoscience and Remote Sensing, Vol. 44, No. 10, pp. 2962-2971.
15. Reali A. (2006). An Isogeometric Analysis approach for the study of structural vibrations, Journal of Earthquake Engineering, Vol. 10, Special Issue 1, pp. 1-30.
16. Sullivan T.J., M.J.N. Priestley, Calvi G.M. (2006). Direct DBD of frame-wall structures, Journal of Earthquake Engineering, Vol. 10, Special Issue 1, pp. 91-124.
17. Tison C., Tupin F., Lisini G., Gamba P. (2006). Feature fusion to improve road network extraction in high resolution SAR images, IEEE Geoscience and Remote Sensing Letters, Vol. 3, No. 2, pp. 217-221.

 

Articoli su rivista nazionale

1. Lai C.G., Petrini L., Strobbia C. (2006). Prestazioni attese e descrizione dell’input sismico: Logiche attuali e del prossimo futuro, L’Edilizia, Ingegneria, Materiali, Tecnologia, No. 145, pp. 42-48.
2. Magenes G., Morandi P. (2006). La progettazione sismica degli edifici in muratura, Costruire in Laterizio, No. 110, pp. 60-65.
3. Calvi G.M., Filippetto M., Bolognini D., Nascimbene R. (2007). Strutture prefabbricate in c.a. in zona sismica: stato della pratica costruttiva Italiana e principali problematiche di progettazione, Ingegneria Sismica, No. 1, pp. 41-56.
4. Lai C.G., Meza-Fajardo K.C. (2007). On the implications of the principle of physical causality in the propagation of seismic waves in geomaterials, Rivista Italiana di Geotecnica, Anno XLI, No. 2, pp. 10-25.

 

Capitoli di libro

1. Bolognini D., Nascimbene R. (2006). Edifici con struttura prefabbricata, in Norme Tecniche per le Costruzioni – Analisi e commento del D.M. 14 settembre 2005, D. Guzzoni (Ed.), Il Sole 24Ore, Italy.
2. Cottrell J.A., Reali A., Bazilevs Y., Hughes T.J.R. (2006). Computational geometry and the analysis of solids and structures, in Computational Mechanics. Solids, Structures and Coupled Problems, C.A.M. Soares, J.A.C. Martins, H.C. Rodrigues, J.A.C. Ambrósio (Eds.), Springer, Dordrecht, The Netherlands.
3. Hughes T.J.R., Cottrell J.A., Bazilevs Y., Reali A. (2006). Computational geometry as a basis for computational structures technology: a look into the future, in Innovation in Computational Structures Technology, B.H.V. Topping, G. Montero, R. Montenegro (Eds.), Saxe-Coburg Publications, Stirling, UK.
4. Lai C.G. (2006). Azione sismica, in Norme Tecniche per le Costruzioni – Analisi e commento del D.M. 14 settembre 2005, D. Guzzoni (Ed.), Il Sole 24Ore, Italy.
5. Lai C.G. (2006). Effetti dell’azione sismica, in Norme Tecniche per le Costruzioni – Analisi e commento del D.M. 14 settembre 2005, D. Guzzoni (Ed.), Il Sole 24Ore, Italy.
6. Magenes G., Penna A. (2006). Edifici con struttura in muratura, in Norme Tecniche per le Costruzioni – Analisi e commento del D.M. 14 settembre 2005, D. Guzzoni (Ed.), Il Sole 24Ore, Italy.
7. Petrini L., Pinho R. (2006). La verifica sismica degli edifici esistenti in cemento armato, in Norme Tecniche per le Costruzioni – Analisi e commento del D.M. 14 settembre 2005, D. Guzzoni (Ed.), Il Sole 24Ore, Italy.

 

Articoli conferenze internazionali

1. Angel J.P., Pinho R., Crowley H. (2006). Verification of some Eurocode 8 rules for simplified analysis of structures, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1090.
2. Artioli E., Auricchio F., da Veiga L.B. (2006). Numerical testing on return map algorithms for von-Misen plasticity with nonlinear hardening based on a generalized midpoint integration scheme, Proceedings of the 3rd European Conference on Computational Mechanics (ECCM06), Lisbon, Portugal.
3. Auricchio F., Petrini L., Reali A. (2006). Toward an exhaustive modeling of the macroscopic behaviour of shape memory alloys, Proceedings of the 3rd European Conference on Computational Mechanics (ECCM06), Lisbon, Portugal.
4. Bal I., Crowley H., Pinho R., Gulay F. (2006). Structural characterisation of Turkish RC building stock for loss assessment applications, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 603.
5. Bird J.F., Bommer J.J., Crowley H. (2006). Earthquake losses due to ground failure (liquefaction and landslides), Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1262.
6. Bommer J.J., Pinho R., Spence R. (2006). Earthquake loss estimation models: time to open the black boxes? Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 834.
7. Bostenaru-Dan M., Pinho R. (2006). ca’redivivus: early RC housing and urban seismic risk, Proceedings of the 3rd European Geosciences Union General Assembly, Vienna, Austria.
8. Bostenaru-Dan M., Pinho R. (2006). ‘CA’REDIVIVUS’: A project on the preservation of European historic reinforced concrete housing buildings – The concept, Proceedings of the Eighth US National Conference on Earthquake Engineering, San Francisco, USA, Paper no. 197.
9. Bostenaru-Dan M., Pinho R. (2006). Challenges to historic reinforced concrete housing architecture in earthquake prone areas, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 457.
10. Calvi G.M., Pinho R., Crowley H. (2006). State-of-the-knowledge on the period elongation of RC buildings during strong ground shaking, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1535.
11. Calvi G.M., Bolognini D., Nascimbene R. (2006). Seismic design of RC precast structures: state of the art and construction practise in the Italian context, Proceedings of the 2nd fib Congress, Naples, Italy, Paper no. 9-30.
12. Calvi G.M., Nakashima M., Pavese A. (2006). Values of large shaking table structural tests, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.
13. Casarotti C., Calvi G.M., Pinho R. (2006). An Adaptive Capacity Spectrum Method for assessment of bridges subjected to earthquake action, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 511.
14. Casarotti C., Pinho R. (2006). Application of an adaptive version of the capacity spectrum method to seismic design and assessment of bridges, Proceedings of the 8th US National Conference on Earthquake Engineering, San Francisco, USA, Paper no. 1934.
15. Ceresa P., Petrini L., Pinho R., Auricchio F. (2006). Flexure-shear fibre beam-column element for modelling of structures under seismic loading, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1425.
16. Corigliano M., Lai C.G., Barla G. (2006). Dynamic response of tunnel in near-fault conditions, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 998.
17. Crowley H., Bommer J.J. (2006). Influence of ground-motion modelling on loss exceedance curves for portfolios of buildings, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 621.
18. Crowley H., Pinho R. (2006). Simplified equations for estimation of period of vibration of existing buildings, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1122.
19. Dall’Ara A., Lai C.G., Strobbia C. (2006). Selection of spectrum-compatible recorded accelerograms for nonlinear seismic response analyses of soil deposits, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1240.
20. Ferracuti B., Savoia M., Pinho R., Francia R. (2006). Pushover analyses of FRP retrofitted RC frames, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 862.
21. Ferracuti B., Savoia M., Pinho R., Francia R. (2006). Assessment of adaptive pushover procedures by dynamic analysis, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 863.
22. Galasco A., Lagomarsino S., Penna A. (2006). On the use of pushover analysis for existing masonry buildings, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.
23. Javed M., Naeem Khan A., Penna A., Magenes G. (2006), “Behaviour of masonry structures during the Kashmir 2005 earthquake, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.
24. Lai C.G., Foti S., Rix G.J. (2006). Forward and inverse modelling of uncertainty in surface wave propagation, Proceedings of the 2006 Congress on Geotechnical Engineering in the Information Technology Age, Atlanta, USA, Paper no. 11954.
25. Magenes G., Prasad A.M., Dodagoudar G.R., Lai C.G., Macchi G., Mathews M.S., Menon D., Menon A., Pavese A., Penna A. (2006). Indo-Italian joint research programme on seismic vulnerability of historical centres in South India, Proceedings of the 5th International Conference on Structural Analysis of Historical Constructions (SAHC 2006), New Delhi, India, pp. 1667-1674.
26. Magenes G. (2006). Masonry building design in seismic areas: recent experiences and prospects from a European standpoint, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Keynote Lecture, Geneva, Switzerland.
27. Meireles H.A., Pinho R., Bento R., Antoniou S. (2006). Verification of an adaptive pushover technique for the 3D case, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 619.
28. Menon A., Lai C.G., Macchi G., Pavese A. (2006). Nonlinear analyses for seismic assessment of ancient masonry towers, Proceedings of the 5th International Conference on Structural Analysis of Historical Constructions (SAHC 2006), New Delhi, India, pp. 1641-1650.
29. Meza-Fajardo K.C., Lai C.G. (2006). Exact causal relationships between attenuation and phase velocity in linear dissipative media, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 624.
30. Pavese A., Calvi G.M., Dacarro F., Ceresa P. (2006). Shaking table and research activities at EUCENTRE, Pavia, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1099.
31. Pietra D., Pinho R., Antoniou S. (2006). Verification of displacement-based adaptive pushover for seismic assessment of high-rise steel buildings, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 956.
32. Pinho R., Antoniou S., Pietra D. (2006). A displacement-based adaptive pushover for seismic assessment of steel and reinforced concrete buildings, Proceedings of the Eighth US National Conference on Earthquake Engineering, San Francisco, USA, Paper no. 1701.
33. Plaza J., Benediktsson A., Brazile J., Chanussot J., Fauvel M., Gamba P., Gualtieri A., Tilton J.C., Trianni G. (2006). Processing of imaging spectroscopy data – advanced technologies, Proceedings of the 2006 International Geosciences and Remote Sensing Symposium (IGARSS’06), Denver, USA, pp. 1974-1978.
34. Rix G.J., Lai C.G. (2006). Model-based uncertainty in surface wave inversion, Proceedings of the 2006 Congress on Geotechnical Engineering in the Information Technology Age, Atlanta, USA, Paper no. 11904.
35. Rota M., Penna A., Strobbia C. (2006). Typological fragility curves from Italian earthquake damage data, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 386.
36. Sigurjonsson S.O., Benediktsson J.A., Lisini G., Gamba P., Chanussot J., Sveinsson J.R. (2006). Analysis of urban SAR Data using morphological pre-processing and neural networks, Proceedings of the 2006 Progress in Electromagnetics Research Symposium (PIERS’06), Cambridge, USA, Paper no. 374.
37. Smyrou E., Blandon-Uribe C., Antoniou S., Pinho R., Crowley H. (2006). Implementation and verification of a masonry panel model for nonlinear dynamic analysis of for infilled RC frames, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 355.
38. Trombetti T., Pavese A. (2006). Dynamic characterization of the uniaxial shaking table at EUCENTRE, Pavia, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.

 

Articoli conferenze nazionali

1. Cattari S., Galasco A., Lagomarsino S., Penna A. (2006). Aspetti critici nell’analisi sismica statica non lineare degli edifici esistenti in muratura, Proceedings of the Workshop on Design for Rehabilitation of Masonry Structures (WONDERmasonry), Firenze, Italy.
2. Ferracuti B., Savoia M., Pinho R., Francia R. (2006). Conventional and adaptive pushover procedures against dynamic analysis, Proceedings of the 16th Italian Conference on Computational Mechanics (GIMC 2006), Bologna, Italy.
3. Magenes G., Morandi P. (2006). Valutazione della risposta sismica di edifici in muratura: modelli e normative, Invited Lecture, Proceedings of the Workshop on Design for Rehabilitation of Masonry Structures (WONDERmasonry), Firenze, Italy.
4. Venini P., Nascimbene R. (2006). Dinamica dei continui microfessurati: modellazione multicampo e studi numerici, Proceedings of the 16th Italian Conference on Computational Mechanics (GIMC 2006), Bologna, Italy.

 

Rapporti di ricerca

1. Sullivan T., Pinho R., Pavese A. (2004). An introduction to structural testing techniques in earthquake engineering, Educational Report ROSE-2004/01, IUSS Press, Pavia, Italy.
2. Calvi G.M., Pinho R. (2004). LESSLOSS – A European Integrated Project on risk mitigation for earthquakes and landslides, Research Report ROSE-2004/02, IUSS Press, Pavia, Italy.
3. Miranda P., Calvi G.M., Pinho R., Priestley M.J.N. (2005). Displacement-based seismic assessment of R/C columns with limited shear resistance, Research Report ROSE- 2005/04, IUSS Press, Pavia, Italy.
4. Casarotti C., Pinho R., Calvi G.M. (2005). Adaptive pushover-based methods for seismic assessment and design of bridge structures, Research Report ROSE-2005/06, IUSS Press, Pavia, Italy.
5. Grant D.N., Fenves G.L., Auricchio A. (2005). Modelling and analysis of high-damping rubber bearings for the seismic protection of bridges, Research Report ROSE-2005/01, IUSS Press, Pavia, Italy.
6. Crowley H., Pinho R., Bommer J.J., Bird J. (2006). Development of a displacement-based method for earthquake loss assessment, Research Report ROSE- 2006/01, IUSS Press, Pavia, Italy.
7. Grant D.N., Bommer J.J., Pinho R., Calvi G.M. (2006). Defining priorities and timescales for seismic intervention in school buildings in Italy, Research Report ROSE- 2006/03, IUSS Press, Pavia, Italy.
8. Beltrami C., Lai C.G., Pecker A. (2006). Seismic soil-structure interaction in large diameter shaft foundations, Research Report ROSE-2006/07, IUSS Press, Pavia, Italy.
9. Bal I.E., Crowley H., Pinho R., Gulay F.G. (2007). Structural characteristics of Turkish RC building stock in Northern Marmara Region for loss assessment applications, Research Report ROSE-2007/03, IUSS Press, Pavia, Italy.

Articoli su rivista internazionale

1. Artioli E., Auricchio F., da Veiga L. B. (2005). Integration schemes for von-Mises plasticity models based on exponential maps: numerical investigations and theoretical considerations, International Journal for Numerical Methods in Engineering, Vol. 64, pp. 1133-1165.
2. Auricchio F., da Veiga L.B., Lovadina C., Reali A. (2005). A stability study of some mixed finite elements for large deformation elasticity problems, Computer Methods in Applied Mechanics and Engineering, Vol. 194, pp. 1075- 1092.
3. Auricchio F., da Veiga L.B., Lovadina C., Reali A. (2005). An analysis of some mixed-enhanced finite element for plane linear elasticity, Computer Methods in Applied Mechanics and Engineering, Vol. 194, pp. 2947-2968.
4. Auricchio F., Stefanelli U. (2005). Well-posedness and approximation for a one-dimensional model for shape memory alloys, Mathematical Models & Methods in Applied Sciences, Vol. 15, pp. 1301-1327.
5. Beltrami C., Lai C.G., Pecker A. (2005). A kinematic interaction model for a large-diameter shaft foundation – an application to seismic demand assessment of a bridge subject to coupled swaying-rocking excitation, Journal of Earthquake Engineering, Vol. 9, Special Issue 2, pp. 355-393.
6. Bird J.F., Crowley H., Pinho R., Bommer J.J. (2005). Assessment of liquefaction-induced building damage, Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 38, No. 4, pp. 215-234.
7. Calvi G.M., Pavese A., Rasulo A., Bolognini D. (2005). Experimental and numerical studies on the seismic response of r.c. hollow bridge piers, Bulletin of Earthquake Engineering, Vol. 3, No. 3, pp. 267-297.
8. Calvi G.M., Palermo A., Pampanin S. (2005). Concept and development of hybrid solutions for seismic resistant bridges systems, Journal of Earthquake Engineering, Vol. 9, No. 6, pp. 899-921.
9. Crowley H., Bommer J.J., Pinho R., Bird J.F. (2005). The impact of epistemic uncertainty on an earthquake loss model, Earthquake Engineering and Structural Dynamics. Vol. 34, No. 14, pp. 1653-1685.
10. Lai C.G., Foti S., Rix G.J. (2005). Propagation of data uncertainty in surface wave inversion, Journal of Environmental and Engineering Geophysics, Vol. 10, No. 2, pp. 219-228.
11. Rota M., Pecker A., Bolognini D., Pinho R. (2005). A methodology for seismic vulnerability of masonry arch bridge walls, Journal of Earthquake Engineering, Vol. 9, Special Issue 2, pp. 331-353.
12. Sullivan T.J., Priestley M.J.N., Calvi G.M. (2005). Development of an innovative seismic design procedure for frame-wall Structures, Journal of Earthquake Engineering, Vol. 9, Special Issue 2, pp. 279-307.

 

Articoli su rivista nazionale

1. Magenes G. (2005). Nuova Ordinanza sismica: ricadute produttive e progettuali, L’Industria dei Laterizi, No. 94, pp. 244-252.

 

Capitoli di libro

1. Bommer J.J., Pinho R., Crowley H. (2005). Using a displacement-based approach for earthquake loss assessment, in Advances in Earthquake Engineering for Urban Risk Reduction, S.T. Wasti, G. Ozcebe (Eds.), Springer, Dordrecht, The Netherlands.
2. Calvi G.M., Casarotti C., Pinho R. (2005). A preliminary comparative study of force, displacement and pushover- based approaches for seismic design of continuous span bridges, in Advances in Earthquake Engineering for Urban Risk Reduction, S.T. Wasti, G. Ozcebe (Eds.), Springer, Dordrecht, The Netherlands.
3. Lai C.G. (2005). Surface waves in dissipative media: forward and inverse modelling, in Surface Waves in Geomechanics: Direct and Inverse Modeling for Soils and Rocks, C.G. Lai, K. Wilmanski (Eds.), CISM-Springer Verlag, Udine, Italy.
4. Pinho R., Antoniou S., Casarotti C., Lopez M. (2005). A displacement-based adaptive pushover algorithm for assessment of buildings and bridges, in Advances in Earthquake Engineering for Urban Risk Reduction, S.T. Wasti, G. Ozcebe (Eds.), Springer, Dordrecht, The Netherlands.

 

Articoli conferenze internazionali

1. Artioli E., Auricchio F., da Veiga L.B. (2005). An optimal time integrator for von Mises constitutive models based on exponential maps, Proceedings of the 8th Conference on Computational Plasticity – Fundamentals and Applications, Barcelona, Spain.
2. Auricchio F., Reali A. (2005). A one-dimensional model describing stress-induced solid phase transformation with residual plasticity, Proceedings of the 2nd ECCOMAS Thematic Conference on Smart Structures and Materials, Lisbon, Portugal.
3. Benzoni G., Casarotti C. (2005). Effects of vertical load and velocity on the isolation bearing performance. Lead-rubber bearings, Proceedings of the 2005 Caltrans Bridge Research Conference, Sacramento, USA, Paper no. 07-503.
4. Bommer J.J., Pinho R., Crowley H. (2005). Using displacement-based earthquake loss assessment in the selection of seismic code design levels, Proceedings of the 9th International Conference on Structural Safety and Reliability (ICOSSAR05), Rome, Italy.
5. Bostenaru-Dan M., Pinho R. (2005). Assessment criteria for historic reinforced concrete housing buildings in Europe, Proceedings of the International Conference on Earthquake Engineering – IZIIS 40 EE-21C, Skopje/Ohrid, Macedonia, Paper no. E190.
6. Calvi G.M., Magenes G., Pinho R. (2005). Displacement based methods to predict earthquake damage at variable geographical scales, Proceedings of the International Conference on the 250th Anniversary of the 1755 Lisbon Earthquake, Lisbon, Portugal.
7. Calvi G.M, Pampanin S., Pavese A., Bolognini D. (2005). Seismic retrofitting strategy for under-designed R.C. frame systems using FRP composites, Proceedings of the International Workshop on Seismic Performance Assessment and Rehabilitation of Existing Buildings, Ispra, Italy.
8. Casarotti C., Benzoni G. (2005). Continuous monitoring of isolated bridges: parametric analysis of the effects of damper characteristics, Proceedings of the 2005 Caltrans Bridge Research Conference, Sacramento, USA, Paper no. 04-508.
9. Crowley H. (2005). DBELA: A new methodology for earthquake loss assessment, Proceedings of the SECED Young Engineers Conference, Bath, UK.
10. McCormick J., DesRoches R., Fugazza D., Auricchio F. (2005). Fragility assessment of steel frames with traditional and shape-memory alloy braces, Proceedings of the 9th International Conference on Structural Safety and Reliability (ICOSSAR 2005), Rome, Italy.
11. Nanni F., Gusmano G., Auricchio F., Forte G. (2005). Mechanical and health monitoring performance of self-sensing CF-GFRPs reinforced beams, Proceedings of the 3rd International Conference on Composites in Construction (CCC 2005), Lyon, France.
12. Pampanin S., Bolognini D., Pavese A., Calvi G.M. (2005). Seismic retrofit strategy for under-designed reinforced concrete frame systems and subassemblies using FRP composites, Proceedings of the International Conference on Concrete Repair Rehabilitation and Retrofitting, Cape Town, South Africa.
13. Pavese A., Lai C.G., Calvi G.M., Ceresa P., Beltrami, C. (2005). Reaction mass and foundation design of the high- performance, one-degree-of-freedom Eucentre shaking table, in Pavia (Italy) Proceedings of the 1st International Conference on Advances in Experimental Structural Engineering, Nagoya, Japan.
14. Pavese A., Petrini L., Mpampatsikos V., Nascimbene R. (2005). The new Italian seismic code for existing R.C. buildings: critical application, Proceedings of the ACI Spring Convention, New York, USA.
15. Pinho R., Antoniou S. (2005). A displacement-based adaptive pushover algorithm for assessment of vertically irregular frames, Proceedings of the 4th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Thessaloniki, Greece.

 

Articoli conferenze nazionali

1. Artioli E., Auricchio F., da Veiga L.B. (2005). Numerical tests on an optimal integration scheme for the von-Mises plasticity model based on exponential maps, Proceedings of the 17th Italian Conference on Theoretical and Applied Mechanics (AIMETA’05), Ferrara, Italy.

 

Libri

1. Calvi G.M., Pavese A., Ceresa P., Dacarro F., Lai C.G., Beltrami C. (2005). Design of a Large Dynamic and Pseudo- Dynamic Testing Facility, IUSS Press, Pavia, Italy.
2. Lai C.G., Wilmanski K. (Eds.) (2005). Surface Waves in Geomechanics: Direct and Inverse Modeling for Soils and Rocks, CISM Lecture Notes No. 481, CISM-Springer Verlag, Udine, Italy.
3. Manfredi G., Masi A., Pinho R., Verderame G., Vona. M. (2007). Valutazione di Edifici Esistenti in Cemento Armato, IUSS Press, Pavia, Italy.
4. Calvi G.M., Kawashima K. (Eds.) (2007). Seismic Bridge Design and Retrofit – Structural Solutions, Bulletin no. 39, fib, Lausanne, Switzerland.
5. Priestley M.J.N., Calvi G.M., Kowalsky M.J. (2007). Displacement Based Seismic Design of Structures, IUSS Press, Pavia, Italy.

 

Rapporti di Ricerca

1. Miranda P., Calvi G.M., Pinho R., Priestley M.J.N. (2005). Displacement-based seismic assessment of R/C columns with limited shear resistance, Research Report ROSE-2005/04, IUSS Press, Pavia, Italy.
2. Casarotti C., Pinho R., Calvi G.M. (2005). Adaptive pushover-based methods for seismic assessment and design of bridge structures, Research Report ROSE-2005/06, IUSS Press, Pavia, Italy.
3. Grant D.N., Fenves G.L., Auricchio A. (2005). Modelling and analysis of high-damping rubber bearings for the seismic protection of bridges, Research Report ROSE-2005/01, IUSS Press, Pavia, Italy.

Articoli su rivista internazionale

1. Antoniou S., Pinho R. (2004). Advantages and limitations of adaptive and non adaptive force-based pushover procedures, Journal of Earthquake Engineering, Vol. 8, No 4, pp. 497-522.
2. Antoniou S., Pinho R. (2004). Development and verification of a displacement-based adaptive pushover procedure, Journal of Earthquake Engineering, Vol. 8, No. 5, pp. 643-661.
3. Auricchio F., Lovadina C., Madureira A.L. (2004). An asymptotically optimal model for isotropic heterogeneous linearly elastic plates, ESAIM Mathematical Modelling and Numerical Analysis, Vol. 38, pp. 877-897.
4. Auricchio F., Stefanelli U. (2004). Numerical analysis of a 3D super-elastic constitutive model, International Journal for Numerical Methods in Engineering, Vol. 61, pp. 142-155.
5. Auricchio F., Petrini L. (2004). A three-dimensional model describing stress-temperature induced solid phase transformations. Part I: solution algorithm and boundary value problems, International Journal for Numerical Methods in Engineering, Vol. 61, pp. 807-836.
6. Auricchio F., Petrini L. (2004). A three-dimensional model describing stress-temperature induced solid phase transformations. Part II: thermomechanical coupling and hybrid composite applications, International Journal for Numerical Methods in Engineering, Vol. 61, pp. 716-737.
7. Bommer J.J., Magenes G., Penazzo P., Hancock J. (2004). The influence of strong-motion duration on the seismic response of masonry structures, Bulletin of Earthquake Engineering, Vol. 2, No. 1, pp. 1-26.
8. Calvi G.M., Ceresa P., Casarotti C., Bolognini D., Auricchio F. (2004). Effects of axial force variation in the seismic response of bridges isolated with friction pendulum systems, Journal of Earthquake Engineering, Vol. 8, SP 1, pp. 187-224.
9. Crowley H., Pinho R., Bommer J.J. (2004). A probabilistic displacement-based vulnerability assessment procedure for earthquake loss estimation, Bulletin of Earthquake Engineering, Vol. 2, No. 2, pp. 173-219.
10. Crowley H., Pinho R. (2004). Period-height relationship for existing European reinforced concrete buildings, Journal of Earthquake Engineering, Vol. 8, Special Issue 1, pp. 93-120.
11. Lupoi G., Calvi G.M., Lupoi A., Pinto P.E. (2004). Comparison of different approaches for seismic assessment of existing buildings, Journal of Earthquake Engineering, Vol. 8, Special Issue 1, pp. 121-160.
12. Menon A., Lai C.G., Macchi G. (2004). Seismic hazard assessment of the historical site of Jam in Afghanistan and stability analysis of the Minaret, Journal of Earthquake Engineering, Vol. 8, Special Issue 1, pp. 251-294.
13. Pavese A., Bolognini D., Peloso S. (2004). FRP seismic retrofit of R.C. square hollow section bridge piers, Journal of Earthquake Engineering, Vol. 8, SP 1, pp. 225-250.

 

Articoli su rivista nazionale

1. Magenes G. (2005). Nuova Ordinanza sismica: ricadute produttive e progettuali, L’Industria dei Laterizi, No. 94, pp. 244-252.
2. Lai C.G., Petrini L., Strobbia C. (2006). Prestazioni attese e descrizione dell’input sismico: Logiche attuali e del prossimo futuro, L’Edilizia, Ingegneria, Materiali, Tecnologia, No. 145, pp. 42-48.
3. Magenes G., Morandi P. (2006). La progettazione sismica degli edifici in muratura, Costruire in Laterizio, No. 110, pp. 60-65.
4. Calvi G.M., Filippetto M., Bolognini D., Nascimbene R. (2007). Strutture prefabbricate in c.a. in zona sismica: stato della pratica costruttiva Italiana e principali problematiche di progettazione, Ingegneria Sismica, No. 1, pp. 41-56.
5. Lai C.G., Meza-Fajardo K.C. (2007). On the implications of the principle of physical causality in the propagation of seismic waves in geomaterials, Rivista Italiana di Geotecnica, Anno XLI, No. 2, pp. 10-25.

  

Capitoli di libro

1. Lopez M., Bommer J.J., Pinho R. (2004). Seismic hazard assessments, seismic design codes and earthquake engineering in El Salvador, in Natural Hazards in El Salvador, W.I. Rose, J.J. Bommer, D.L. López, M.J. Carr, J.J. Major (Eds.), GSA Press, Boulder Colorado, USA.
2. Lo Presti D.C.F., Lai C.G., Foti S. (2004). Geophysical and geotechnical investigations for ground response analyses, in Recent Advances in Earthquake Geotechnical Engineering and Microzonation, A. Ansal (Ed.), Kluwer- Springer, Dordrecht, The Netherlands.
3. Auricchio F., Brezzi F., Lovadina C. (2004). Mixed finite element methods, in Encyclopedia of Computational Mechanics, E. Stein, R. De Borst, T.J.R. Hughes, John Wiley & Sons, Inc., USA.

  

Articoli conferenze internazionali

1. Auricchio F., da Veiga L.B., Lovadina C., Reali A. (2004). Enhanced strain methods for elasticity problems, Proceedings of the 4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004), Jyvaskyla, Finland.
2. Bonett R., Barbat A., Pujades L., Lagomarsino S., Penna A. (2004). Performance Assessment for Unreinforced Masonry Building In Low Seismic Zones, Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, paper n. 409.
3. Cherubini C., D’Intinosante V., Ferrini M., Lai C.G., Lo Presti D.C., Rainone M.L., Signanini P., Vessia, G. (2004). Problems associated with the assessment of local site effects through a multidisciplinary integrated study: the case of Fivizzano’s town (Italy), Proceedings of the 5th International Conference on Case Histories in Geotechnical Engineering, New York, USA, Paper no. 3.08.
4. Crowley H., Bommer J.J., Pinho R. (2004). Displacement-based earthquake loss assessment (DBELA), Proceedings of the 20th General Assembly of the European Seismological Commission, Potsdam, Germany.
5. Delgado P., Costa A., Pinho R., Delgado R. (2004). Different strategies for seismic assessment of bridges – comparative study, Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper no. 1609.
6. Fugazza D., McCormick J., DesRoches R., Auricchio F. (2004). Seismic analysis of a 3- and 6-story steel frame equipped with conventional and shape-memory alloy braces, Proceedings of the US-Korea joint seminar/workshop on smart structures technologies, Seoul, South Korea.
7. Galasco A., Lagomarsino S., Penna A., Resemini S. (2004). Non-linear seismic analysis of masonry structures, Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, paper n. 843.
8. Grant D., Fenves G.L., Auricchio F. (2004). Bridge isolation with high-damping rubber bearings – analytical modelling and system response, Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
9. Lai C.G. (2004). Strongly coupled inversion of Rayleigh dispersion and attenuation curves Proceedings of the 21st International Congress of Theoretical and Applied Mechanics (21st ICTAM), Warsaw, Poland.
10. Magenes G., Pampanin S. (2004). Seismic response of gravity-design frames with masonry infills, Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper no. 4004.
11. Menon A., Lai C.G. (2004). Seismic hazard assessment of Jam in Afghanistan Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper no. 2314.
12. Pampanin S., Bolognini D., Pavese A., Magenes G., Calvi G.M. (2004). Multi-level seismic rehabilitation of existing frame systems and subassemblies using FRP composites, Proceedings of the 2nd International Conference on FRP Composites in Civil Engineering, Adelaide, Australia.
13. Pavese A., Bolognini D., Peloso S. (2004). Seismic behaviour of R.C. hollow section bridge piers retrofitted with FRP, Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper no. 2831.
14. Penna A., Cattari S., Galasco A., Lagomarsino S. (2004). Seismic Assessment of Masonry Structures by Non-linear Macro-element Analysis, Proceedings of the 4th International Seminar on Structural Analysis of Historical Constructions (SAHC 2004), Padova, Italy, Vol. 2, pp.1157-1164.
15. Pinho R. (2004). Performance and displacement-based earthquake loss estimation of urban areas, Proceedings of the International Workshop on Performance-Based Seismic Design (PBSD) – Concepts and Implementation, Bled, Slovenia.
16. Restrepo-Vélez L.F., Magenes G. (2004). Simplified procedure for the seismic risk assessment of unreinforced masonry buildings, Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper no. 2561.
17. Restrepo-Vélez L.F., Magenes G. (2004). Experimental testing in support of a mechanics-based procedure for the seismic risk evaluation of unreinforced masonry buildings, Proceedings of the 4th International Seminar on Structural Analysis of Historical Constructions (SAHC 2004), Padova, Italy.
18. Sullivan T.J., Priestley M.J.N., Calvi G.M. (2004). Displacement shapes of frame-wall structures for direct displacement-based design, Proceedings of the 5th Seismic Risk Forum, Bristol, UK.

 

Articoli conferenze nazionali

1. Artioli E., Auricchio F., da Veiga L.B. (2004). A new integration scheme for von-Mises plasticity: numerical investigations, Proceedings of the 15th Italian Conference on Computational Mechanics (GIMC 2004), Genova, Italy.
2. Auricchio F., da Veiga L.B., Lovadina C., Reali A (2004). Studio di stabilità di alcuni elementi finiti misti per problemi elastici non lineari, Proceedings of the 15th Italian Conference on Computational Mechanics (GIMC 2004), Genova, Italy.
3. Balbi A., Frumento S., Lagomarsino S., Penna A. (2004). Una procedura integrata per la valutazione della vulnerabilità sismica degli edifici scolastici, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
4. Calvi G.M., Bolognini D., Penna A. (2004). Seismic performance of masonry-infilled r.c. frames: benefits of slight reinforcements, Proceedings of the 6th Portuguese Congress on Seismology and Earthquake Engineering, Keynote Lecture, Guimarães, Portugal, pp. 256-276.
5. Calvi G.M., Visconti N., Bolognini D., Nascimbene R. (2004). Modellazione e verifica di strutture prefabbricate in zona sismica, CONSTRUCTA 2004, Roma, Italia.
6. Cattari S., Curti E., Giovinazzi S., Lagomarsino S., Parodi S., Penna A. (2004). Un modello meccanico per l’analisi di vulnerabilità del costruito in muratura a scala urbana, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
7. Cattari S., Galasco A., Lagomarsino S., Penna A. (2004). Analisi non lineare di edifici in muratura con il programma Tremuri, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
8. Curti E., Galasco A., Lagomarsino S., Parodi S., Penna A., Podestà S., Lazzari, Picotto (2004). Il terremoto dell’11 aprile 2003 in Piemonte: un nuovo modello per la stima dei costi per il miglioramento sismico delle chiese, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
9. Galasco A., Lagomarsino S., Penna A., Nicoletti M., Margheriti C., Spina D., La monaca G., Salcuni A. (2004). Identificazione ed analisi non lineare degli edifici in muratura dell’Osservatorio Sismico delle Strutture, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
10. Giovinazzi S., Lagomarsino S., Penna A. (2004). Implementation and comparison of vulnerability models in GIS environment, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
11. Guagenti E., Garavaglia E., Petrini L. (2004). About validation, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
12. Lai C.G., Menon A., Macchi, G. (2004). Seismic vulnerability of the Minaret of Jam in Afghanistan, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy, Paper no. H024.
13. Pampanin S., Magenes G., Baletta G., (2004). Simulazione della risposta sismica di edifici pre-normativa in cemento armato con tamponature, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
14. Restrepo-Vélez L.F., Magenes G., (2004). A mechanics-based procedure for the seismic risk assessment of masonry buildings at urban scale, Proceedings of the 11th Italian Conference on Earthquake Engineering, Genova, Italy.
15. Restrepo-Vélez L.F., Magenes G. (2004). Evaluación del riesgo sísmico de estructuras de mampostería no reforzada, Proceedings of the 12th Colombian Symposium on Structural Damage, Asociación de Ingenieros Estructurales de Antioquia, Medellín, Colombia.

 

Libri

1. Petrini L., Pinho R., Calvi G.M. (2004). Criteri di Progettazione Antisismica, IUSS Press, Pavia, Italy.

 

Rapporti di ricerca

1. Sullivan T., Pinho R., Pavese A. (2004). An introduction to structural testing techniques in earthquake engineering, Educational Report ROSE-2004/01, IUSS Press, Pavia, Italy.
2. Calvi G.M., Pinho R. (2004). LESSLOSS – A European Integrated Project on risk mitigation for earthquakes and landslides, Research Report ROSE-2004/02, IUSS Press, Pavia, Italy.

Articoli su rivista internazionale

1. Auricchio F., Marfia S., Sacco E. (2003). Modelling of SMA materials: training and two way shape memory effects, Computers & Structures, Vol. 81, pp. 2301-2317.
2. Auricchio F., Sacco E. (2003). Refined first-order shear deformation theory models for composite laminates, Journal of Applied Mechanics, Vol. 70, pp. 381-390.
3. Auricchio F., Petrini L., Pietrabissa E., Sacco E. (2003). Numerical modeling of shape-memory alloys in orthodontics, Computer Modeling in Engineering & Sciences, Vol. 4, pp. 365-380.
4. Auricchio F., da Veiga L.B. (2003). On a new integration scheme for von-Mises plasticity with linear hardening, International Journal for Numerical Methods in Engineering, Vol. 56, pp. 1375-1396.
5. Glaister S., Pinho R. (2003). Development of a simplified deformation-based method for seismic vulnerability assessment, Journal of Earthquake Engineering, Vol. 7, Special Issue 1, pp. 107-140.
6. Griffith M.C., Magenes G., Melis G., Picchi L. (2003). Evaluation of out-of-plane stability of unreinforced masonry walls subjected to seismic excitation, Journal of Earthquake Engineering, Vol. 7, Special Issue 1, pp. 141-169.
7. Lovadina C., Auricchio F. (2003). On the enhanced strain technique for elasticity problems, Computer & Structures, Vol. 81, pp. 777-787.
8. Sullivan T.J., Calvi G.M., Priestley M.J.N., Kowalsky M.J. (2003). The limitations and performances of different displacement based design methods, Journal of Earthquake Engineering, Vol. 7, Special Issue 1, pp. 201-241.
9. Taylor R.L., Filippou F.C., Saritas A., Auricchio F. (2003). Mixed finite element method for beam and frame problems, Computational Mechanics, Vol. 31, pp. 192-203.

Capitoli di libro

1. Auricchio F., Petrini L. (2003). Numerical algorithm for a three-dimensional stress-induced solid-phase-transformation model, in Novel Approaches in Civil Engineering, M. Frémond, F. Macer (Eds.), Springer, Dordrecht, The Netherlands.
2. Calvi G.M., Kowalsky M.J., Priestley M.J.N. (2003). Application and evaluation of displacement-based approaches, in Displacement-based Seismic Design of RC Buildings, G.M. Calvi (Ed.), fib Bulletin no. 25, fib, Lausanne, Switzerland.

Articoli conferenze internazionali

1. Auricchio F., da Veiga L.B. (2003). Integration factor and integration scheme for von-Mises plasticity, Proceedings of the 7th Conference on Computational Plasticity – Fundamentals and Applications, Barcelona, Spain.
2. Calvi G.M., Priestley M.J.N. (2003). Damage, assessment and strengthening of the Viaduct 1 in Bolu, Turkey, Proceedings of the ACI International Conference on Seismic Bridge Design and Retrofit, San Diego, USA.
3. Griffith M.C., Magenes G. (2003). Accuracy of displacement-based seismic evaluation of URM wall stability, Proceedings of the Pacific Conference on Earthquake Engineering, Christchurch, New Zealand, Paper no. 127.
4. Pampanin S., Magenes G., Carr A. (2003). Modelling of shear hinge mechanism in poorly detailed RC beam-column joints, Proceedings of the FIB 2003 Symposium, Athens, Greece.
5. Priestley M.J.N., Calvi G.M. (2003). Direct displacement-based design of concrete bridges, Proceedings of the ACI International Conference on Seismic Bridge Design and Retrofit, San Diego, USA.

Articoli conferenze nazionali

1. Auricchio F., Petrini L., Peyroux R. (2003). Shape Memory Alloys: dissipative versus non-dissipative modeling, Proceedings of the 16th Italian Conference on Theoretical and Applied Mechanics (AIMETA’03), Ferrara, Italy.
2. Lai C.G., Menon A., Macchi G. (2003). Sismicità e terremoto di progetto al sito di Jam in Afghanistan, Atti Incontro Annuale Ricercatori di Geotecnica – IARG 2003, Potenza, Italy.
3. Petrini L., Migliavacca F., Dubini G., Auricchio F. (2003). Numerical analysis of vascular stents exploiting shape-memory-alloy behavior, Proceedings of the 16th Italian Conference on Theoretical and Applied Mechanics (AIMETA’03), Ferrara, Italy.

Libri

1. Calvi G.M. (Ed.) (2003). Displacement-based Seismic Design of RC Buildings, Bulletin no. 25, fib, Lausanne, Switzerland.